[Journal Article]
Microstructural adjustment of carburized steel components towards reducing the quenching-induced distortion
In: Journal of materials processing technology, 264, 313-327, 2019
[DOI: 10.1016/j.jmatprotec.2018.08.040]

Farivar, Hamidreza
Prahl, Ulrich
Hans, M.
Bleck, Wolfgang Peter

[Contribution to a book, Contribution to a conference proceedings]
Microstructure-based material modelling for cutting simulation of two gear steels
In: XIVth International Conference on High Speed Machining, 17. 1- 18 April 2018; San Sebastian/ Spain, 2018

Abouridouane, M.
Laschet, G.
Kripak, V.
Dierdorf, Jens
Prahl, U.
et al.

[Book, Dissertation / PhD Thesis]
Investigations on the processability of cold rolled microalloyed high strength dual phase steels, 2018

Roik, Jan

[Book, Dissertation / PhD Thesis]
Effect of pressure on metal dusting and the protection of affected materials by oxide forming and catalytically inhibiting diffusion coatings, 2018

Madloch, Sonja

[Journal Article]
Experimental Investigations on Solidification of 500-kg Steel Ingots with Laboratory Trials
In: Metallurgical and materials transactions / B, 49 (5), 2514-2532, 2018
[DOI: 10.1007/s11663-018-1325-5]

Chen, Zhiye
Senk, Dieter Georg
Firsbach, Felix Georg

[Journal Article]
Carbon Redistribution in Martensite in High-C Steel: Atomic-Scale Characterization and Modelling
In: Metals, 8 (8), 577, 2018
[DOI: 10.3390/met8080577]

Song, Wenwen
Drouven, Carsten
Galindo-Nava, Enrique I.

[Book, Dissertation / PhD Thesis]
Microstructure informed modeling of cleavage fracture, 2018

He, Jinshan

[Journal Article]
An Experimental Study on the Impact of Deoxidation Methods on the Fatigue Properties of Bearing Steels
In: Steel research international, 89 (9), 1800129, 2018
[DOI: 10.1002/srin.201800129]

Gu, Chao
Bao, Yan-Ping
Gan, Peng
Lian, Junhe
Münstermann, Sebastian

[Journal Article]
Strain Aging Behavior of an Austenitic High‐Mn Steel
In: Steel research international, 89 (9), 1700515, 2018
[DOI: 10.1002/srin.201700515]

Wesselmecking, Sebastian
Song, Wenwen
Ma, Yan
Roesler, Thorsten
Hofmann, Harald
et al.

[Journal Article]
Modeling of plasticity and fracture behavior of X65 steels: seam weld and seamless pipes
In: International journal of fracture, 213 (1), 17-36, 2018
[DOI: 10.1007/s10704-018-0303-x]

Paredes, Marcelo
Lian, Junhe
Wierzbicki, Tomasz
Cristea, Mihaela E.
Münstermann, Sebastian
et al.

[Journal Article]
Fracture properties of zinc coating layers in a galvannealed steel and an electrolytically galvanized steel
In: Materials science and engineering / A, 732, 320-325, 2018
[DOI: 10.1016/j.msea.2018.05.084]

He, Jinshan
Lian, Junhe
Aretz, Anke
Vajragupta, Napat
Hangen, Ude
et al.

[Journal Article]
Quantification of complex-phase steel microstructure by using combined EBSD and EPMA measurements
In: Materials characterization, 142, 179-186, 2018
[DOI: 10.1016/j.matchar.2018.05.038]

Li, Xiaoxiao
Ramazani, Ali
Prahl, Ulrich
Bleck, Wolfgang Peter

[Journal Article]
Multiphase-Field Simulation of Cementite Precipitation during Isothermal Lower Bainitic Transformation
In: Steel research international, 89 (8), 1800028, 2018
[DOI: 10.1002/srin.201800028]

Song, Wenwen
Prahl, Ulrich
Ma, Yan
Bleck, Wolfgang Peter

[Journal Article]
Study of Structural Inheritance of Austenite in Nb‐Microalloyed 18CrNiMo7-6 Steel
In: Steel research international, 89 (8), 1-15, 2018
[DOI: 10.1002/srin.201800107]

Sharma, Mamta
Bleck, Wolfgang Peter

[Dissertation / PhD Thesis]
Entwicklung und Anwendung des gekoppelten Schädigungsmodells im Falle der Ultra-Low Cycle Fatigue Belastungen, 2018

Novokshanov, Denis

[Journal Article]
Prediction of decarburisation process along with hydrogen and nitrogen removal by mathematical modelling of RH degassing process
In: Ironmaking & steelmaking, 45 (5), 412-419, 2017
[DOI: 10.1080/03019233.2016.1274847]

Mukherjee, D.
Shukla, A. K.
Senk, Dieter Georg

[Journal Article]
Recrystallization behavior in a low-density high-Mn high-Al austenitic steel undergone thin strip casting process
In: Materials science and engineering / A, 733, 87-97, 2018
[DOI: 10.1016/j.msea.2018.07.023]

Ji, Fengqin
Song, Wenwen
Ma, Yan
Li, Chengning
Bleck, Wolfgang Peter
et al.

[Journal Article]
The lattice strain ratio in characterizing the grain-to-grain interaction effect and its specific insight on the plastic deformation of polycrystalline materials
In: The journal of strain analysis for engineering design, 53 (5), 353-363, 2018
[DOI: 10.1177/0309324718770935]

Xie, Qingge
Lian, Junhe
Sun, Fengwei
Gan, Bin
Wang, Yandong

[Contribution to a book, Contribution to a conference proceedings]
Experimental and Numerical Study of the Effect of Mechanical Vibration on C45 Steel Ingot Solidification
In: ICS 2018 - 7th International Congress on the Science and Technology of Steelmaking ; XXVIII Convegno Nazionale Trattamenti Termici, 2018

Niu, Shuai
Senk, Dieter Georg
Rezende, João Luiz Lopes

[Contribution to a book, Contribution to a conference proceedings]
Simulation and experimental study of the chemical composition transformation and decarburization in mould powder layer in continuous casting
In: ICS 2018 - 7th International Congress on the Science and Technology of Steelmaking ; XXVIII Convegno Nazionale Trattamenti Termici, 2018

Münch, Steve
Senk, Dieter Georg
Strauch, Patrick
Crimmann, Frederic
Rezende, João Luiz Lopes
et al.

[Contribution to a book, Contribution to a conference proceedings]
Comprehensive Study of Meniscus Freezing Phenomena in Continuous Casting
In: ICS 2018 - 7th International Congress on the Science and Technology of Steelmaking ; XXVIII Convegno Nazionale Trattamenti Termici, 2018

Crimmann, Frederic
Senk, Dieter Georg
Münch, Steve
Rezende, João Luiz Lopes
Lachmund, H.

[Book, Dissertation / PhD Thesis]
Untersuchung der Hochtemperaturwechselwirkungen von Platin-Rhodium 90-10 mit Monomethylhydrazin und Distickstoffetroxid bei den Verbrennungsreaktionen in Satellitentriebwerken, 2018

Mertens, Loreen

[Book, Dissertation / PhD Thesis]
Werkstoffentwicklung von DP-Stählen mit verbesserter Umformbarkeit, 2018

Zielesnik, Maria

[Contribution to a book, Journal Article]
Influence of Intercritical Annealing Temperature on Microstructure and Mechanical Properties of a Cold-Rolled Medium-Mn Steel
In: Metals, 8 (5), 357, 2018
[DOI: 10.3390/met8050357]

Ma, Yan
Song, Wenwen
Zhou, Shixin
Schwedt, Alexander
Bleck, Wolfgang

[Contribution to a book, Journal Article]
Multiscale Modelling of Hydrogen Transport and Segregation in Polycrystalline Steels
In: Metals : open access journal, 8 (6), 430, 2018
[DOI: 10.3390/met8060430]

Hüter, Claas
Shanthraj, Pratheek
McEniry, Eunan
Spatschek, Robert
Hickel, Tilmann
et al.

[Contribution to a book]
Nach 50 Jahren immer noch frisch : der FOSTA e. V. begeht ein Jubiläum
In: Forschungsvereinigung Stahlanwendung e. V. : 50 Jahre, 1968-2018, 2018

Bleck, Wolfgang Peter

[Journal Article]
Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys
In: Acta materialia, 150, 88-103, 2018
[DOI: 10.1016/j.actamat.2018.02.048]

Haase, Christian
Barrales-Mora, Luis Antonio

[Journal Article]
Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime
In: International journal of minerals, metallurgy and materials, 25 (6), 623-629, 2018
[DOI: 10.1007/s12613-018-1609-4]

Gu, Chao
Bao, Yan-ping
Gan, Peng
Wang, Min
He, Jin-shan

[Contribution to a book, Contribution to a conference proceedings]
Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 2018
[DOI: 10.1063/1.5035024]

Weiß-Borkowski, Nathalie
Lian, Junhe
Camberg, Alan
Tröster, Thomas
Münstermann, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings]
A comparative study on the forming limit diagram prediction between Marciniak-Kuczynski model and modified maximum force criterion by using the evolving non-associated Hill48 plasticity model
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 2018
[DOI: 10.1063/1.5035020]

Shen, Fuhui
Lian, Junhe
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 2018
[DOI: 10.1063/1.5034894]

Motaman, Seyedamirhossein
Komerla, Krishna Chaitanya
Storms, Thomas
Prahl, U.
Brecher, Christian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Forming limit prediction by an evolving non-quadratic yield criterion considering the anisotropic hardening and r-value evolution
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 2018
[DOI: 10.1063/1.5035015]

Lian, Junhe
Shen, Fuhui
Wenqi, Liu
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
A new tensile impact test for the toughness characterization of sheet material
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 2018
[DOI: 10.1063/1.5035065]

Könemann, Markus Josef
Lenz, David
Brinnel, Victoria
Münstermann, Sebastian

[Book, Dissertation / PhD Thesis]
Thermodynamische Modellierung der Wasserstoffentfernung bei reduziertem Druck im VD-Prozess, 2018

Christmann, Kevin

[Journal Article]
Effects of the isotropic and anisotropic hardening within each grain on the evolution of the flow stress, the r-value and the deformation texture of tensile tests for AA6016 sheets
In: Materials science and engineering / A, 721, 154-164, 2018
[DOI: 10.1016/j.msea.2018.02.053]

Xie, Q.
Van Bael, Albert
An, Yuguo G.
Lian, Junhe
Sidor, J. J.

[Contribution to a book, Journal Article]
Modeling the Effect of Primary and Secondary Twinning on Texture Evolution during Severe Plastic Deformation of a Twinning-Induced Plasticity Steel
In: Materials, 11 (5), 863, 2018
[DOI: 10.3390/ma11050863]

Toth, Laszlo
Haase, Christian
Allen, Robert
Lapovok, Rimma
Molodov, Dmitri
et al.

[Journal Article]
Local Deformation and Mn-C Short-Range Ordering in a High-Mn Fe-18Mn-0.6C Steel
In: Metals, 8 (5), 292, 2018
[DOI: 10.3390/met8050292]

Song, Wenwen
Houston, Judith

[Dissertation / PhD Thesis]
Eigenschaften lufthärtender martensitischer Schmiedestähle mit Mangangehalten von 3-10 Gew.-%, 2018

Stieben, Andreas

[Journal Article]
Prestraining Induced Enhancement in the Fatigue Limit Obtained by Load Increasing Thermal Method for Metastable Austenitic Stainless Steel
In: Steel research international, 89 (4), 1700434, 2018
[DOI: 10.1002/srin.201700434]

Gupta, Satyapriya
Kucharczyk, Pawel
Münstermann, Sebastian
Jayaganthan, Rengaswamy

[Contribution to a book, Contribution to a conference proceedings]
Bestimmung isothermer Fließkurven durch eine verbesserte Betrachtung des Taylor-Quinney-Faktors bei hohen Dehnraten
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2018

Könemann, Markus Josef
Fehlemann, N.
Brinnel, Victoria
Wesselmecking, Sebastian
Münstermann, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Modellierung eines gekoppelten Modells zur Beschreibung der Wasserstoffdiffusion und des mechanischem Verhalten in einem einschlussbehafteten repräsentativen Volumenelement
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2018

Dölz, Michael
Langenberg, Julius
Brinnel, Victoria
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Zähigkeitseigenschaften und Versagensverhalten hochfester Schraubenstähle
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2018

Brinnel, Victoria
Sabotke, Björn
Wu, Bo
Lorenz, C.
Schilberg, Erimar
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss der Materialschädigung auf die Kantenrissempfindlichkeit von Dualphasenstählen
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / Deutscher Verband für Materialforschung und -prüfung. Arbeitskreis Bruchmechanik und Bauteilsicherheit ; Obmann: Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2018

Pütz, Felix
Könemann, Markus Josef
Lian, Junhe
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Schädigungsmechanismen in mehrphasigen Karosseriestählen - Bewertung des Mikrostruktureinflusses in Experiment und Simulation
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 50. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 20. und 21. Februar 2018, Paderborn / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2018

Münstermann, Sebastian
Pütz, Felix
Könemann, Markus Josef
Brinnel, Victoria
Lian, Junhe

[Book, Dissertation / PhD Thesis]
Ein Beitrag zur Entwicklung der Temperatur von Stahlschmelzen in Stahlgießpfanne und Tundish unter den betrieblichen Randbedingungen im Blasstahlwerk, 2018

Kortzak, Katharina Daniela

[Journal Article]
Temperature dependent strain hardening and fracture behavior of TWIP steel
In: International journal of plasticity, 104, 80-103, 2018
[DOI: 10.1016/j.ijplas.2018.02.001]

Madivala, Manjunatha
Schwedt, Alexander
Wong, Su Leen
Roters, Franz
Prahl, Ulrich
et al.

[Journal Article]
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
In: Materials and design, 145, 205-217, 2018
[DOI: 10.1016/j.matdes.2018.02.062]

Köhnen, Patrick
Haase, Christian
Bültmann, Jan
Ziegler, Stephan
Schleifenbaum, Johannes Henrich
et al.

[Journal Article]
Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel
In: Steel research international, 89 (3), 1700408, 2018
[DOI: 10.1002/srin.201700408]

Xie, Qingge
Gorti, Sarma
Sidor, Jurij J.
An, Yu Guo
Wang, Yan Dong
et al.

[Journal Article]
The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy
In: Materials science and engineering / A, 714, 140-145, 2017
[DOI: 10.1016/j.msea.2017.12.073]

Xie, Q.
Li, R.
Wang, Y. D.
Su, R.
Lian, Junhe
et al.

[Journal Article]
Experimental quantification of carbon gradients in martensite and its multi-scale effects in a DP steel
In: Materials science and engineering / A, 718, 250-259, 2018
[DOI: 10.1016/j.msea.2018.01.106]

Farivar, Hamidreza
Richter, Silvia
Hans, Marcus
Schwedt, Alexander
Prahl, Ulrich
et al.

[Journal Article]
Failure predictions of DP600 steel sheets using various uncoupled fracture criteria
In: Engineering fracture mechanics, 190, 367-381, 2017
[DOI: 10.1016/j.engfracmech.2017.12.022]

Habibi, Niloufar
Ramazani, Ali
Sundararaghavan, Veera
Prahl, Ulrich

[Contribution to a book]
Continuous Casting on its Way of Unlimited Options
In: Stranggießen - Continuous Casting : eine technische Revolution in Geschichte und Gegenwart / herausgegeben von Manfred Rasch, 2018

Senk, Dieter Georg

[Journal Article]
The Influence of Continuous Cooling Rate on Nano-Precipitation Behavior of a Ti-Bearing Steel undergone Hot Deformation
In: Steel research international, 89 (3), 1700361, 2017
[DOI: 10.1002/srin.201700361]

Ji, Fengqin
Li, Chengning
Song, Wenwen
Wang, Guodong

[Contribution to a book, Journal Article]
Fracture-mechanics based prediction of the fatigue strength of weldments. Material aspects
In: Engineering fracture mechanics, 198, 79-102, 2017
[DOI: 10.1016/j.engfracmech.2017.09.010]

Kucharczyk, Pawel
Madia, M.
Zerbst, U.
Schork, B.
Gerwien, P.
et al.

[Contribution to a conference proceedings, Journal Article]
An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction
In: International journal of solids and structures, 151, 20-44, 2017
[DOI: 10.1016/j.ijsolstr.2017.04.007]

Lian, Junhe
Shen, Fuhui
Jia, Xiaoxu
Ahn, Deok-Chan
Chae, Dong-Chul
et al.

[Journal Article]
Correlation of defect density with texture evolution during cold rolling of a Twinning-Induced Plasticity (TWIP) steel
In: Materials science and engineering / A, 711, 69-77, 2017
[DOI: 10.1016/j.msea.2017.11.009]

Anand, Kunjan Kumar
Mahato, Bhupeshwar
Haase, Christian
Kumar, Ashok
Ghosh Chowdhury, Sandip

[Contribution to a book, Journal Article]
Ab Initio-Based Modelling of the Yield Strength in High-Manganese Steels
In: Metals : open access journal, 8 (1), 34, 2018
[DOI: 10.3390/met8010034]

Sevsek, Simon
Bleck, Wolfgang Peter

[Journal Article]
Numerical study of inclusion parameters and their influence on fatigue lifetime
In: International journal of fatigue, 111, 70-80, 2018
[DOI: 10.1016/j.ijfatigue.2018.01.036]

Gillner, Karl
Henrich, Manuel
Münstermann, Sebastian

[Book]
Monotonic and Ultra Low Cycle Fatigue Behaviour of Pipeline Steels : Experimental and Numerical Approaches, 2018
[DOI: 10.1007/978-3-319-78096-2]

Fernandes, António Augusto
de Jesus, Abílio M. P.
Jorge, Renato Natal
Pereira, João Carlos R.
Figueiredo, Miguel
et al.

[Contribution to a book, Journal Article]
On the Mn-C Short-Range Ordering in a High-Strength High-Ductility Steel: Small Angle Neutron Scattering and Ab Initio Investigation
In: Metals : open access journal, 8 (1), 44, 2018
[DOI: 10.3390/met8010044]

Song, Wenwen
Bogdanovski, Dimitri
Yildiz, Ahmet
Houston, Judith
Dronskowski, Richard
et al.

[Journal Article]
Sprödbruchverhalten hochfester Schrauben großer Abmessungen bei tiefen Temperaturen
In: Stahlbau, 87 (1), 17-29, 2018
[DOI: 10.1002/stab.201810559]

Stranghöner, Natalie
Lorenz, Christoph
Feldmann, Markus
Citarelli, Sandro
Bleck, Wolfgang
et al.

[Journal Article]
Pinning effect of strain induced Nb(C,N) on case hardening steel under warm forging conditions
In: Journal of materials processing technology, 253, 121-133, 2017
[DOI: 10.1016/j.jmatprotec.2017.11.008]

Springer, Phillip
Prahl, Ulrich

[Book]
Handbuch Stahl : Auswahl, Verarbeitung, Anwendung, 2017
[DOI: 10.3139/9783446449626]

Bleck, Wolfgang
Moeller, Elvira

[Contribution to a book]
Stähle für Pkw-Karosserien
In: Handbuch Stahl : Auswahl, Verarbeitung, Anwendung / Wolfgang Bleck, Elvira Moeller, 2017

Lin, Mingxuan
Zielesnik, Maria
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Continuous Casting Behavior of High Manganese Steel Grades with Varying Aluminium Contents
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Steenken, Bernhard

[Contribution to a book, Contribution to a conference proceedings]
Towards Prediction of Coal Conversion Behaviour in the Blast Furnace
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Ho, Hai Thong
Babich, Alexander
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Thermodynamic Modelling of Hydrogen Removal at Reduced Pressure in the VD-Process (A Contribution to Energy Savings and Sustainability)
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Christmann, Kevin
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Novel Raw Materials for Ironmaking to Face Challenges on Scarce Resources and CO2 Emissions
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Babich, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Methods for the Determination of Segregation Phenomena and Cleanliness Level in Steel
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Ho, Hai Thong
Fronk, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
An Introduction to RWTH Aachen University and Dept. of Ferrous Metallurgy
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Senk, Dieter Georg
Babich, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Slag heat recovery - a contribution to sustainability and CO2 minimization
In: Sustainable steel production : Travelling Conferences - 4 Universities Meeting / edited by Dieter Senk and Alexander Babich, Dept. of Ferrous Metallurgy, RWTH Aachen University, 2017

Firsbach, Felix Georg

[Contribution to a book]
Integrated Computational Materials and Production Engineering (ICMPE)
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017
[DOI: 10.1007/978-3-319-47452-6_5]

Bleck, Wolfgang Peter
Brecher, Christian
Herty, Michael Matthias
Hirt, Gerhard Kurt Peter
Hopmann, Christian
et al.

[Contribution to a book]
Direct, Mold-Less Production Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017
[DOI: 10.1007/978-3-319-47452-6_2]

Poprawe, Reinhart
Bleck, Wolfgang Peter
Piller, Frank Thomas
Schuh, Günther
Barg, Sebastian Julian
et al.

[Contribution to a book]
Multi-technology Platforms (MTPs)
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017
[DOI: 10.1007/978-3-319-47452-6_6]

Brecher, Christian
Bleck, Wolfgang Peter
Feldhusen, Jörg
Hirt, Gerhard Kurt Peter
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of MnS secondary precipitation on the hot ductility trough and surface defects of as cast billets
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Alavarez de Toledo, Gonzalo
Münch, Steve
Senk, Dieter Georg
Pereda, Xabier

[Journal Article]
Comparative Study of the Influence of Reversion- and Recovery- Annealing on the Mechanical Behavior of High-Manganese Steels with Varying Stacking Fault Energy
In: Steel research international, 1700377, 2017
[DOI: 10.1002/srin.201700377]

Brasche, Frederike Lina
Haase, Christian
Barrales-Mora, Luis Antonio
Molodov, Dmitri

[Contribution to a book]
Reduzierung von Chromanteilen in E-Ofen-Schlacken durch Steigerung der Legierungsmitteleffizienz bei der Erzeugung von hochchromhaltigen Schmelzen
In: Mineralische Nebenprodukte und Abfälle : Aschen, Schlacken, Stäube und Baurestmassen / Karl J. Thomé-Kozmiensky. - Band 4, 2017

Mees, Helge
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Einfluss des Kaltwalzens auf die mechanisch-technologischen Kennwerte von AHSS-Stählen
In: XXXVI. Verformungskundliches Kolloquium, Zauchensee von 18.3. bis 22.3.2017 : Tagungsband / [edited by] Bruno Buchmayr, 2017

Degner, Michael
Bader, Gerald
Bleck, Wolfgang Peter
Breuer, Michael

[Contribution to a book, Contribution to a conference proceedings]
MAXILA - Towards rapid process analysis of macro-segregation
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Senk, Dieter Georg
Ho, Hai Thong
von Helden, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Microalloyed Engineering Steels with Improved Performance
In: Bainite - from nano to macro: Symposium on Science and Application of Bainite : honoring Professor Sir Harshad K.D.H. Bhadeshia : proceedings. Eds.: M. Lohrmann, H.-W. Zoch, 2017

Bleck, Wolfgang Peter
Bambach, Margarita
Wirths, Vera
Stieben, Andreas

[Contribution to a book, Contribution to a conference proceedings]
Hot work tool steels strengthened by carbides and intermetallic phases
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Bleck, Wolfgang Peter
Zimmermann, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Influence of injection of pre-reduced iron ores on the processes in the blast furnace raceway
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Born, Stefan
Babich, Alexander
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Influence of pre-treated biomass on the microstructure of metallurgical coke
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Babich, Alexander
Schwarz, Matthias
Senk, Dieter Georg
Ebert, Jan

[Contribution to a book, Contribution to a conference proceedings]
Granulation of ultra-fine ores for utilization in iron ore sintering
In: 9th ECCC European Continuous Casting Conference - ECCC 2017 : Monday 26 June 2017-Thursday 29 June 2017, Austria Center Vienna : proceedings / ASMET, The Austrian Society for Metallurgy and Materials, 2017

Steindorf, Gabriel
Babich, Alexander
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Modellierung des Gleitbruchs von mehrphasigen Stählen bei hohen Dehnraten
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14. und 15. Februar 2017, Mittweida / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2017

Könemann, Markus Josef
Siebenkotten, Nora
Lenz, David
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung eines hybriden schädigungsmechanischen Modells unter Berücksichtigung des Hochlagen- und Tieflagenverhaltens ferritischer Stähle
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14. und 15. Februar 2017, Mittweida / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2017

Golisch, Georg
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Modellierung des Einflusses von plastischen Vorverformungen auf die Zähigkeitseigenschaften des hochfesten Baustahls S690Q mit Hilfe eines schädigungsmechanischen Modells
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14. und 15. Februar 2017, Mittweida / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2017

Hoppe, Barbara
Di, Yidu
Novokshanov, Denis
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Von der Mikrostruktur zur Zeitfestigkeit: Ein validierter Modellansatz
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14. und 15. Februar 2017, Mittweida / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2017

Gillner, Karl
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Precipitation Hardened AFP Steels for Cold Formed High-Strength Solid Parts
In: New Developments in Forging Technology 2017 / edited by Mathias Liewald ; IFU, Institute for Metal Forming Technology of the Universität Stuttgart, 2017

Prahl, Ulrich
Schwich, Hannah
Bleck, Wolfgang Peter
Hoffmann, Frank
Kawalla, Rudolf

[Contribution to a book, Contribution to a conference proceedings]
Optimierung der Festigkeitskriterien für hochfeste Stahlbauteile durch schädigungsmechanische Modellierung
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 49. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 14. und 15. Februar 2017, Mittweida / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Michael Vormwald, Technische Universität Darmstadt, Fachgebiet Werkstoffmechanik, 2017

Brinnel, Victoria
Schaffrath, Simon
Holub, C.
Münstermann, Sebastian
Feldmann, Markus

[Book, Report]
Ableitung neuer, verbesserter Festigkeitskriterien für Stahlbauteile, 2017

Feldmann, Markus
Schaffrath, Simon
Bleck, Wolfgang Peter
Münstermann, Sebastian
Brinnel, Victoria

[Book, Report]
Dehnungsbasierte Bemessungskriterien für unbefeuerte Druckbehälter: Demonstration eines erweiterten DBF-Verfahrens, 2017

Bleck, Wolfgang Peter
Münstermann, Sebastian
Brinnel, Victoria
Feldmann, Markus
Schaffrath, Simon
et al.

[Contribution to a book, Contribution to a conference proceedings]
Continuum Damage Mechanics Model as an Instrument for Development of Design Rules for Steel Structures in Seismic Affected Zones
In: Computational Plasticity: Fundamentals and Applications. XIV International Conference on Computational Plasticity : Fundamentals and Applications : COMPLAS 2017, 5-7 September 2017, Barcelona, Spain / E. Oñate, D. R. J. Owen, D. Peric, M. Chiumenti (Eds.), 2017

Hoppe, Barbara
Di, Yidu
Novokshanov, Denis
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Optimisation of biomass preparation and injection into the blast furnace
In: Уникальный материал XXI столетия : Формирование, свойства, применение / Юрий Витальевич Рябчиков, 2017

Solar, J.
Hippe, Frederik
Babich, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Prediction of Ductile Material Failure by Using Innovative Damage Mechanics Concepts
In: ASME 2017 Pressure Vessels and Piping Conference : July 16-20, 2017, Waikoloa, Hawaii, USA. - Volume 6A: Materials and Fabrication, 2017
[DOI: 10.1115/PVP2017-66096]

Schaffrath, Simon
Feldmann, Markus
Brinnel, Victoria
Münstermann, Sebastian
Novokshanov, Denis

[Contribution to a book, Contribution to a conference proceedings]
Berechnung der Grenzformänderungskurve eines nichtrostenden ferritischen Stahls aus Zugversuch und kristallographischer Textur
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : Prüftechnik - Kennwertermittlung - Schadensvermeidung / herausgegeben von Holger Frenz und Julia Beate Langer ; Veranstalter: Deutscher Verband für Materialforschung und -prüfung (DVM), Deutsche Gesellschaft für Materialkunde (DGM), Stahlinstitut VDEh, 2017

Münstermann, Sebastian
Lian, Junhe
Liu, Wenqi
Shen, Fuhui

[Journal Article]
Modeling Bainite Transformation and Retained Austenite in Hot Rolled TRIP Steel by Instantaneous Carbon Enrichment
In: Steel research international, 88 (12), 1700122, 2017
[DOI: 10.1002/srin.201700122]

Suwanpinij, Piyada
Li, Xiaoxiao
Prahl, Ulrich
Bleck, Wolfgang Peter

[Journal Article]
Diversity and Innovation Management in Large Research Groups
In: International Journal of Innovation Management, 5 (2), 49-72, 2017

Steuer, Linda
Sharma, Mamta
Bleck, Wolfgang Peter
Leicht-Scholten, Carmen Petra

[Book, Dissertation / PhD Thesis]
Zur Vermeidung von Wasserstoffschäden am höchstfesten Stahl 300M bei der galvanischen Abscheidung von Zink-Nickel-Überzügen, 2017

Gommlich, Tim

[Contribution to a book, Contribution to a conference proceedings]
Comparison of Refractory Microstructures after Finger Tests Performed in Blast Furnace Slag
In: [60. International Colloquium on Refractories, ICR, 2017-10-18 - 2017-10.19, Aachen, Germany], 2017

Telle, Rainer
Tonnesen, Thorsten
Loison, Lise
Reichert, Wanja
Baas, F.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Microstructure based simulations for prediction of flow curves and selection of process parameters for inter-critical annealing in DP steel
In: International Conference "Structural and Phase Transformations in Materials: Theory, Computer Modelling and Experiment" : 23-27 March 2017, Ekaterinburg, Russian Federation / organizers: Ural Federal University; Laboratory of Multi-Scale Mathematical Modeling, 2017
[DOI: 10.1088/1757-899X/192/1/012010]

Deepu, Mathew John
Farivar, Hamidreza
Prahl, Ulrich
Phanikumar, G.

[Journal Article]
Novel raw materials for ironmaking
In: Stahl und Eisen, 137 (6), 33-34,37-38, 40-45, 2017

Babich, Alexander
Senk, Dieter Georg

[Journal Article]
Microalloyed Engineering Steels with Improved Performance - an Overview
In: HTM - journal of heat treatment and materials, 72 (6), 346-354, 2017
[DOI: 10.3139/105.110339]

Bleck, Wolfgang
Bambach, M.
Wirths, V.
Stieben, Andreas

[Contribution to a book, Contribution to a conference proceedings]
ICME-Based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion
In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) / Paul Mason, Charles R. Fisher, Ryan Glamm, Michele V. Manuel, Georg J. Schmitz, Amarendra K. Singh, Alejandro Strachan (editors), 2017
[DOI: 10.1007/978-3-319-57864-4_13]

Farivar, Hamidreza
Rothenbucher, G.
Prahl, Ulrich
Bernhardt, R.

[Contribution to a book, Contribution to a conference proceedings]
An Attempt to Integrate Software Tools at Microscale and Above Towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion
In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) / Paul Mason, Charles R. Fisher, Ryan Glamm, Michele V. Manuel, Georg J. Schmitz, Amarendra K. Singh, Alejandro Strachan (editors), 2017
[DOI: 10.1007/978-3-319-57864-4_1]

John, Deepu Mathew
Farivar, Hamidreza
Rothenbucher, Gerald
Kumar, Ranjeet
Zagade, Pramod
et al.

[Abstract, Contribution to a conference proceedings]
Influence of residual and external stress on the Villari effect and magnetostriction in high-silicon electrical steel sheet
In: Abstracts / 23rd Soft Magnetic Materials Conference : SMM 2017 : Universidad de Sevilla : [10-13 September 2017], 2017

Leuning, Nora
Steentjes, Simon
Schulte, Markus
Bleck, Wolfgang
Hameyer, Kay

[Book, Dissertation / PhD Thesis]
Lode-Winkelabhängige Gleitbruchmodellierung bei hohen Dehnraten, 2017

Döbereiner, Benedikt

[Contribution to a conference proceedings]
Microstructural and Thermal Property Changes of Castables After Corrosion with Blast Furnance Slag at Different Conditions
In: [15th Biennial Worldwide Congress UNITECR, UNITECR 2017, 2017-09-26 - 2017-09-29, Santiago de Chile, Chile], 2017

Telle, Rainer
Loison, Lise
Tonnesen, Thorsten
Baas, F.
Firsbach, Felix Georg
et al.

[Contribution to a book, Contribution to a conference proceedings]
Integrative Werkstoff- und Prozesssimulation
In: Internet of Production für agile Unternehmen : AWK Aachener Werkzeugmaschinen-Kolloquium 2017, 18. bis 19. Mai / Herausgeber: Christian Brecher, Fritz Klocke, Robert Schmitt, Günther Schuh, 2017

Klocke, Fritz
Münstermann, Sebastian
Schröder, Kai-Uwe
Apel, Markus
Binder, Hanns Marvin
et al.

[Contribution to a book, Contribution to a conference proceedings]
Comparative Study on Damage Evolution during Sheet Metal Forming of Steels DP600 and DP1000
In: 36th IDDRG Conference - Materials Modelling and Testing for Sheet Metal Forming : 2-6 July 2017, Munich, Germany / editor: Wolfram Volk (chair of Metal Forming and Casting, Technical University of Munich, Germany), 2017
[DOI: 10.1088/1742-6596/896/1/012074]

Münstermann, Sebastian
Lian, Junhe
Pütz, Felix
Könemann, Markus Josef
Brinnel, Victoria

[Contribution to a book, Contribution to a conference proceedings]
Dynamic Fracture Behavior of High Strength Pipeline Steel
In: DYMAT 23rd Technical Meeting - International Conference on Dynamic Fracture of Ductile Materials / Edited by Tore Børvik, Arild Holm Clausen, Odd Sture Hopperstad, Magnus Langseth, Aase Gavina Reyes, 2017
[DOI: 10.1016/j.proeng.2017.08.098]

Chandran, Sarath
Verleysen, Patricia
Lian, Junhe
Liu, Wenqi
Cooreman, Steven
et al.

[Contribution to a book, Contribution to a conference proceedings]
Design of an Experimental Program to Assess the Dynamic Fracture Properties of a Dual Phase Automotive Steel
In: DYMAT 23rd Technical Meeting - International Conference on Dynamic Fracture of Ductile Materials / Edited by Tore Børvik, Arild Holm Clausen, Odd Sture Hopperstad, Magnus Langseth, Aase Gavina Reyes, 2017
[DOI: 10.1016/j.proeng.2017.08.097]

Chandran, Sarath
Verleysen, Patricia
Lian, Junhe
Liu, Wenqi
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : conference date: 26-28 April 2017 : location:, Dublin, Ireland, 2017
[DOI: 10.1063/1.5007961]

Weiß-Borkowski, Nathalie
Lian, Junhe
Marten, Thorsten
Tröster, Thomas
Münstermann, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Recrystallization kinetics and texture evolution during annealing of cold-rolled high-Mn steel
In: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2017 (AMHS’17) : Conference date: 9-13 October 2017 : Location: Tomsk, Russia / Editors: Victor E. Panin, Sergey G. Psakhie and Vasily M. Fomin, 2017
[DOI: 10.1063/1.5013913]

Yanushkevich, Z.
Belyakov, A.
Haase, Christian
Molodov, Dmitri
Kaibyshev, R.

[Journal Article]
Determination of global and local cleavage fracture characteristics of high strength bolt steels
In: Materials testing, 59 (11/12), 945-950, 2017
[DOI: 10.3139/120.111092]

Wu, Bo
Döbereiner, Benedikt Martin
Piao, Zhengyin
Sabotke, Björn
Brinnel, Victoria
et al.

[Journal Article]
Numerically predicted high cycle fatigue properties through representative volume elements of the microstructure
In: International journal of fatigue, 105, 219-234, 2017
[DOI: 10.1016/j.ijfatigue.2017.09.002]

Gillner, Karl
Münstermann, Sebastian

[Book, Proceedings]
Sustainable steel production : Travelling Conferences - 4 Universities Meeting
In: Travelling Conferences - 4 Universities Meeting, 2017

Senk, Dieter Georg
Babich, Alexander

[Contribution to a book, Contribution to a conference proceedings]
A unified dislocation density-dependent physical-based constitutive model for cold metal forming
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 2017
[DOI: 10.1063/1.5008195]

Schacht, Konstantin
Motaman, Seyedamirhossein
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
90 Years of the Journal “Steel Research International”
In: Steel research international, 88 (10), 1700371, 2017
[DOI: 10.1002/srin.201700371]

Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Crystal plasticity assisted prediction on the yield locus evolution and forming limit curves
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - A, 2017
[DOI: 10.1063/1.5007987]

Lian, Junhe
Liu, Wenqi
Shen, Fuhui
Münstermann, Sebastian

[Journal Article]
Extension of the modified Bai-Wierzbicki model for predicting ductile fracture under complex loading conditions
In: Fatigue & fracture of engineering materials & structures, 40 (12), 2152-2168, 2017
[DOI: 10.1111/ffe.12645]

Wu, Bo
Li, Xiaoxiao
Di, Yidu
Brinnel, Victoria
Lian, Junhe
et al.

[Journal Article]
A generalized Orowan model for cleavage fracture
In: Engineering fracture mechanics, 186, 105-118, 2017
[DOI: 10.1016/j.engfracmech.2017.09.022]

He, Jinshan
Lian, Junhe
Golisch, Georg
Jie, Xiaodong
Münstermann, Sebastian

[Journal Article]
Investigation of microstructure and mechanical properties of friction stir welded AA6016-T4 and DC04 alloy joints
In: The international journal of advanced manufacturing technology, 94 (9/12), 4209-4219, 2017
[DOI: 10.1007/s00170-017-1022-6]

Komerla, Krishna Chaitanya
Naumov, Andreas
Mertin, Chris Frederic
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Journal Article]
Investigation of the Microstructure Evolution in a Fe-17Mn-1.5Al-0.3C Steel via In Situ Synchrotron X-ray Diffraction during a Tensile Test
In: Materials, 10 (10), 1129, 2017
[DOI: 10.3390/ma10101129]

Ma, Yan
Song, Wenwen
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Experimental and numerical study on the crashworthiness of a high-strength steel sheet for automotive applications
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Liu, Wenqi
Lian, Junhe
Könemann, Markus Josef
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
A new testing procedure for the toughness characterisation of sheet materials under dynamic loading conditions
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Könemann, Markus Josef
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Fracture behaviors in high manganese steels with respect to hydrogen content, strain rate sensitivity and mesoscopic segregation
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Guo, Xiaofei
Schwedt, Alexander
Richter, Silvia
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
High speed tensile tests with infrared thermography of TWIP, DP, and austenitic stainless steels
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Wesselmecking, Sebastian
Ingendahl, Tobias
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Innovative multilayer ceramic coatings for hot stamping steels
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Tenié, Alexander
Kuznetsov, Volodymyr
Bleck, Wolfgang
Fürbeth, Wolfram
Benfer, Sigrid

[Contribution to a book, Contribution to a conference proceedings]
Development of New Steels for Lightweight Construction
In: SCT 2017 : 5th International Conference on Steels in Cars and Trucks : Future trends in steel development, processing technologies and applications : Bringing the automotive, supplier and steel industries together : proceedings : June 18 - 22, 2017 Noordwijkerhout/Amsterdam, The Netherlands / Host: Hans-Joachim Wielandt, Steel Institute VDEh; Organizer: TEMA Technologie Marketing AG, 2017

Neipp, Clemens
Weber, Christian
Surm, Holger
Bleck, Wolfgang
Stahl, Karsten
et al.

[Contribution to a conference proceedings]
Characterisation of niobium microsegregation and eutectic niobium carbide along the process chain in a microalloyed case hardening steel
In: [15th European Workshop on Modern Developments and Applications in Microbeam Analysis and IUMAS-7 Meeting, EMAS 2017, 2017-05-06 - 2017-05-11, Konstanz, Germany], 2017

Sharma, Mamta
Richter, Silvia
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book]
Profitability Assessment as a Contribution to the Theory of Production
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017

Brecher, Christian
Hirt, Gerhard Kurt Peter
Klocke, Fritz
Reisgen, Uwe
Conrads, Laura
et al.

[Dissertation / PhD Thesis]
Investigations on Hydrogen Embrittlement of Advanced High Strength Steels for Automotive Applications, 2017

Gao, Qi

[Journal Article]
Towards a micromechanical based description for strength increase in dual phase steels during bake-hardening process
In: Materials science and engineering / A, 702, 386-397, 2017
[DOI: 10.1016/j.msea.2017.07.017]

Ramazani, A.
Serafeim, A.
Prahl, Ulrich

[Dissertation / PhD Thesis]
Improved Limit State Definitions for Pressure Vessels by a Scale-bridging Application of Damage Mechanics, 2017

Brinnel, Victoria

[Journal Article]
Strain-induced martensite decay in bearing steels under rolling contact fatigue: Modelling and atomic-scale characterisation
In: Acta materialia, 139, 163-173, 2017
[DOI: 10.1016/j.actamat.2017.08.005]

Fu, Hanwei
Song, Wenwen
Galindo-Nava, Enrique I.
Rivera-Díaz-del-Castillo, Pedro E. J.

[Journal Article]
Study on a High Entropy Alloy by High Energy Synchrotron X-Ray Diffraction and Small Angle Neutron Scattering
In: Steel research international, 88 (10), 1700079, 2017
[DOI: 10.1002/srin.201700079]

Song, Wenwen
Radulescu, Aurel
Liu, Lulu
Bleck, Wolfgang

[Journal Article]
The TRIP Effect and Its Application in Cold Formable Sheet Steels
In: Steel research international, 88 (10), 1700218, 2017
[DOI: 10.1002/srin.201700218]

Bleck, Wolfgang
Guo, Xiaofei
Ma, Yan

[Journal Article]
Microstructure and texture evolution of a high manganese TWIP steel during cryo-rolling
In: Materials characterization, 132, 20-30, 2017
[DOI: 10.1016/j.matchar.2017.07.043]

Klimova, M.
Zherebtsov, S.
Stepanov, N.
Salishchev, G.
Haase, Christian
et al.

[Journal Article]
Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications
In: Materials science and technology : MST, 33 (15), 1713-1727, 2017
[DOI: 10.1080/02670836.2017.1312208]

Ma, Yan

[Journal Article]
Cold Model-Based Investigations to Study the Effects of Operational and Nonoperational Parameters on the Ruhrstahl-Heraeus Degassing Process
In: Metallurgical and materials transactions / B, 48 (2), 763-771, 2017
[DOI: 10.1007/s11663-016-0877-5]

Mukherjee, Deepjyoti
Shukla, Ajay Kumar
Senk, Dieter Georg

[Book, Dissertation / PhD Thesis]
Alternative Legierungskonzepte für Warmarbeitsstähle : Substitution von Karbiden durch intermetallische Phasen, 2017

Zimmermann, Alexander

[Journal Article]
Modeling of Chip Breakage in Machining of AISI 1045 Steel by Using an Improved Damage Mechanics Model
In: Steel research international, 88 (7), 1600338, 2017
[DOI: 10.1002/srin.201600338]

Wu, Bo
Buchkremer, Stefan
Münstermann, Sebastian
Lian, Junhe
Veselovac, Dražen
et al.

[Book, Dissertation / PhD Thesis]
Fundamental study on mechanical properties high strength steels processed by quenching and partitioning, 2017

Sias Chacón, Arisbeth

[Contribution to a book, Contribution to a conference proceedings]
Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws
In: 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) / Edited by José Outeiro and Gérard Poulachon, 2017
[DOI: 10.1016/j.procir.2017.03.332]

Abouridouane, Mustapha
Laschet, Gottfried
Kripak, Viktor
Texeira, Andre
Dierdorf, Jens
et al.

[Contribution to a book, Contribution to a conference proceedings]
Scale Bridging Simulations of Large Elastic Deformations and Bainitic Transformations
In: High-performance scientific computing : first JARA-HPC Symposium, JHPCS 2016, Aachen, Germany, October 4-5, 2016 : revised selected papers / Edoardo Di Napoli, Marc-André Hermanns, Hristo Iliev, Andreas Lintermann, Alexander Peyser (eds.), 2017
[DOI: 10.1007/978-3-319-53862-4_11]

Weikamp, Marc
Hüter, Claas
Lin, Mingxuan
Prahl, Ulrich
Schicchi, Diego
et al.

[Contribution to a book, Contribution to a conference proceedings]
Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation During Press Hardening
In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) / Paul Mason, Charles R. Fisher, Ryan Glamm, Michele V. Manuel, Georg J. Schmitz, Amarendra K. Singh, Alejandro Strachan (editors), 2017
[DOI: 10.1007/978-3-319-57864-4_31]

Prahl, Ulrich
Lin, Mingxuan
Weikamp, Marc
Hüter, Claas
Schicchi, Diego
et al.

[Journal Article]
Generalized Gibbs-Thomson equation for nanoparticles at grain boundaries
In: Acta materialia, 129, 361-365, 2017
[DOI: 10.1016/j.actamat.2017.03.007]

Lin, Mingxuan
Gottstein, Günter
Shvindlerman, Lasar

[Journal Article]
Prediction of plasticity and damage initiation behaviour of C45E + N steel by micromechanical modelling
In: Materials and design, 121, 154-166, 2017
[DOI: 10.1016/j.matdes.2017.02.032]

Wu, Bo
Vajragupta, N.
Lian, Junhe
Hangen, U.
Wechsuwanmanee, Peerapon
et al.

[Journal Article]
Characterization of Nb-Microsegregation and Eutectic Carbide in As-Cast Nb-Microalloyed Al-Free Case Hardening Steel
In: Steel research international, 88 (10), 1700092, 2017
[DOI: 10.1002/srin.201700092]

Sharma, Mamta
Richter, Silvia
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
Identification of copper precipitates in scrap based recycled low carbon rebar steel
In: Materials and design, 120, 157-169, 2017
[DOI: 10.1016/j.matdes.2017.02.015]

Ramadan, A.
Shash, A. Y.
El-Mahallawi, I. S.
Senk, Dieter Georg
Mattar, T.

[Journal Article]
Identifying Structure-Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 69 (5), 848-855, 2017
[DOI: 10.1007/s11837-017-2303-0]

Diehl, Martin
Groeber, Michael
Haase, Christian
Molodov, Dmitri
Roters, Franz
et al.

[Journal Article]
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
In: Materials science and engineering / A, 688, 180-189, 2017
[DOI: 10.1016/j.msea.2017.01.099]

Haase, Christian
Tang, Florian
Wilms, Markus B.
Weisheit, Andreas
Hallstedt, Bengt

[Journal Article]
Corrigendum to “Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at −196 °C” [Mater. Sci. Eng. A 686C (2017) 134-141]
In: Materials science and engineering / A, 693, 237-237, 2017
[DOI: 10.1016/j.msea.2017.03.106]

He, Jinshan
Lian, Junhe
Golisch, Georg
He, An
Di, Yidu
et al.

[Journal Article]
Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at −196 °C
In: Materials science and engineering / A, 686, 134-141, 2017
[DOI: 10.1016/j.msea.2017.01.042]

He, Jinshan
Lian, Junhe
Golisch, Georg
He, An
Di, Yidu
et al.

[Contribution to a conference proceedings, Journal Article]
Scenario for Data Exchange at the Microstructure Scale
In: Integrating materials and manufacturing innovation, 6 (1), 127-133, 2017
[DOI: 10.1007/s40192-017-0092-5]

Schmitz, G. J.
Farivar, Hamidreza
Prahl, Ulrich

[Journal Article]
A Significant Improvement in the Mechanical Properties of AISI 304 Stainless Steel by a Combined RCSR and Annealing Process
In: Advanced engineering materials, 19 (3), UNSP 1600663, 2017
[DOI: 10.1002/adem.201600663]

Asghari-Rad, Peyman
Nili-Ahmadabadi, Mahmoud
Shirazi, Hassan
Hossein Nedjad, Syamak
Koldorf, Sebastian

[Dissertation / PhD Thesis]
Computer simulation of warm forging of a Nb-microalloyed steel, 2017

Springer, Phillip

[Book, Dissertation / PhD Thesis]
Oxidation-nitridation of chromium at high temperatures and its mitigation by alloying, 2017

Soleimani-Dorcheh, Ali

[Contribution to a book]
Scientific Cooperation Engineering
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 2017
[DOI: 10.1007/978-3-319-47452-6_11]

Jeschke, Sabina
Bleck, Wolfgang
Richert, Anja Simone
Schuh, Günther
Schulz, Wolfgang
et al.

[Book]
Handbook of software solutions for ICME, 2016
[DOI: 10.1002/9783527693566]

Schmitz, Georg
Prahl, Ulrich

[Contribution to a book, Journal Article]
Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
In: Materials, 10 (1), 8, 2016
[DOI: 10.3390/ma10010008]

Jägle, Eric A.
Sheng, Zhendong
Kürnsteiner, Philipp
Ocylok, Sörn
Weisheit, Andreas
et al.

[Contribution to a book, Journal Article]
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
In: Materials, 10 (1), 56, 2017
[DOI: 10.3390/ma10010056]

Haase, Christian
Bültmann, Jan
Hof, Jan
Ziegler, Stephan
Bremen, Sebastian
et al.

[Contribution to a book]
Demonstrator Conductive Friction Stir Welding (FSW) Center
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 2017

Hirt, Gerhard Kurt Peter
Reisgen, Uwe
Bleck, Wolfgang
Bambach, Markus
Schiebahn, Alexander
et al.

[Contribution to a book]
Demonstrator Hybrid Sheet Metal Processing Center
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 2017

Bleck, Wolfgang
Bailly, David Benjamin
Bambach, Markus
Conrads, Laura
Göttmann, Alexander
et al.

[Journal Article]
Hot ductility behaviour of high manganese steels with varying aluminium contents
In: Materials science and technology : MST, 33 (5), 567-573, 2016
[DOI: 10.1080/02670836.2016.1235855]

Steenken, Bernhard
Rezende, João Luiz Lopes
Senk, Dieter

[Journal Article]
Characteristic and evolution of inclusions in Al-Killed titanium alloyed steel during air contact process
In: Metallurgical research & technology, 114 (1), 110, 2017
[DOI: 10.1051/metal/2016057]

Wang, Min
Bao, Yan-ping
Senk, Dieter
Zhang, Chao-jie

[Journal Article]
Enhancement of the strength-ductility combination of twinning-induced/transformation-induced plasticity steels by reversion annealing
In: Materials science and engineering / A, 681, 56-64, 2016
[DOI: 10.1016/j.msea.2016.10.109]

Berrenberg, Frederike
Haase, Christian
Barrales-Mora, Luis Antonio
Molodov, Dmitri

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Microstructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault Energy
In: Materials science forum : MSF, 879, 436-441, 2016
[DOI: 10.4028/www.scientific.net/MSF.879.436]

Ding, H.
Wu, Z. Q.
Han, D.
Zan, N.
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Intermetallic Phases in New Steels
In: Materials science forum, 879, 9-14, 2016
[DOI: 10.4028/www.scientific.net/MSF.879.9]

Bleck, Wolfgang
Song, Wenwen
Zimmermann, Alexander

[Journal Article]
On the deformation behavior of κ-carbide-free and κ-carbide-containing high-Mn light-weight steel
In: Acta materialia, 122, 332-343, 2016
[DOI: 10.1016/j.actamat.2016.10.006]

Haase, Christian
Zehnder, Christoffer
Ingendahl, Tobias
Bikar, André
Tang, Florian
et al.

[Contribution to a book, Journal Article]
Modelling of grain boundary dynamics using amplitude equations
In: Continuum mechanics and thermodynamics, 29 (4), 895-911, 2015
[DOI: 10.1007/s00161-015-0424-7]

Hüter, Claas
Neugebauer, Jörg
Boussinot, Guillaume
Svendsen, Bob
Prahl, Ulrich
et al.

[Journal Article]
Precipitation simulation and x-ray absorption spectroscopy for hot rolled v-hsla steel
In: Acta metallurgica Slovaca, 22 (4), 249-258, 2016
[DOI: 10.12776/ams.v22i4.817]

Suwanpinij, Piyada
Dickert, Hans Henning
Sricharoenchai, Prasonk

[Contribution to a conference proceedings]
ICME - Treiber für den digitalen Wandel in der Werkstofftechnik
In: [Trend-Workshop: Skalen-Überbrückende Simulation, 2016-11-08 - 2016-11-08, Bochum, Germany], 2016

Schmitz, Georg
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Quantitative numerische Beschreibung des Gefügeeinflusses auf die Dauerfestigkeit von Baustahl
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : Tagung Werkstoffprüfung 2016, 1. und 2. Dezember, Neu-Ulm / Herausgeben von: Prof. Dr. Hans-Jürgen Christ ; Veranstalter: Deutsche Gesellschaft für Materialkunde (DGM), Deutscher Verband für Materialforschung und -prüfung (DVM), Stahlinstitut VDEh, 2016

Münstermann, Sebastian
Sharaf, Mohamed

[Contribution to a book, Contribution to a conference proceedings]
Modelling and characterisation of bainite and retained austenite in hot rolled trip steel
In: Metal 2016 : Conference Metal 2016 proceedings ; 25th Conference on Metallurgy and Materials, May 25-27, 2016, Hotel Voronez I, Brno, Czech Republic, 2016

Suwanpinij, Piyada
Li, Xiaoxiao
Prahl, Ulrich
Bleck, Wolfgang Peter

[Contribution to a book, Contribution to a conference proceedings]
Laboratory Process Simulations to Improve Mechanical Properties of Cold Rolled DP Steels
In: 10th International Rolling Conference and the 7th European Rolling Conference : June 6-9, 2016 Graz, Austria / organised by ASMET - The Austrian Society for Metallurgy and Materials ; chairman: Bruno Buchmayr (Montanuniversitaet Loeben), 2016

Roik, Jan
Yan, Bo
Zhang, Suoquan
Jiao, Sihai
Zhu, Xiadong
et al.

[Contribution to a book, Contribution to a conference proceedings]
Influence of hydrogen on formability and bendability of DP1180 steel for car body application
In: IDDRG2016 conference on "Challenges in Forming High-Strength Sheets" : 12-15 June 2016, Linz, Austria / the editors: Edwin Till (voestalpine Stahl GmbH), Melanie Baumgartner (ASMET), Benjamin Hackl (voestalpine Stahl GmbH), Bruno Hribernik (ASMET), Christian Walch (voestalpine Stahl GmbH), 2016
[DOI: 10.1088/1757-899X/159/1/012010]

Gao, Q.
Han, F.
Wortberg, D.
Bleck, Wolfgang
Liewald, M.

[Contribution to a book, Contribution to a conference proceedings]
Influence of the Manganese Content on the Hot Ductility Behavior of High Manganese Steels within the System Fe-Mn-C
In: [3rd International Conference on High Manganese Steels, HMnS2016, 16.11.2016-18.11.2016, Chengdu, Peoples R China], 2016

Steenken, Bernhard
Rezende, João Luiz Lopes
Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Nano-sized Intermetallic Kappa Phase Strengthening in Al-alloyed Steels for Automotive Applications
In: [3rd International Conference on High Manganese Steels, HMnS2016, 16.11.2016-18.11.2016, Chengdu, Peoples R China], 2016

Song, Wenwen
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Hydrogen Effects on the Microstructure Evolution of High Manganese Steel during Tensile Deformation
In: [3rd International Conference on High Manganese Steels, HMnS2016, 16.11.2016-18.11.2016, Chengdu, Peoples R China], 2016

Guo, Xiaofei
Zaefferer, Stefan
Archie, Fady
Wu, Hao
Prahl, Ulrich
et al.

[Contribution to a book, Contribution to a conference proceedings]
Control of the Mechanical Behavior of High Mn Steels by Extrinsic and Intrinsic Parameters
In: [3rd International Conference on High Manganese Steels, HMnS2016, 16.11.2016-18.11.2016, Chengdu, Peoples R China], 2016

Bleck, Wolfgang
Prahl, Ulrich
Song, Wenwen

[Contribution to a book, Contribution to a conference proceedings]
Bake-Hardening Behaviour of High Manganese TWIP Steels: Potential and Limitations
In: [3rd International Conference on High Manganese Steels, HMnS2016, 16.11.2016-18.11.2016, Chengdu, Peoples R China], 2016

Wesselmecking, Sebastian
Ingendahl, Tobias
Gospodinov, Irina
Blankart, Charline
Hofmann, H.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Нетрадиционные материалы для доменной печи
In: ПОЗНАНИЕ ПРОЦЕССОВ И РАЗВИТИЕ ТЕХНОЛОГИИ ДОМЕННОЙ ПЛАВКИ, 2016

Babich, Alexander
Senk, Dieter Georg

[Conference Presentation]
Нетрадиционные материалы для доменной печи
In: ПОЗНАНИЕ ПРОЦЕССОВ И РАЗВИТИЕ ТЕХНОЛОГИИ ДОМЕННОЙ ПЛАВКИ Dnipro 2016-07-04 - 2016-07-08, 2016

Babich, Alexander
Senk, Dieter Georg

[Journal Article]
A parallelized model for coupled phase field and crystal plasticity simulation
In: Computer methods in materials science, 16, 156-162, 2016

Lin, Mingxuan
Prahl, Ulrich

[Dissertation / PhD Thesis]
Behandlung der Einschmelzproblematik von hochmanganhaltigen Stählen bei erhöhtem Aluminiumgehalt, 2016

Peymandar, Mohammad

[Report]
Lufthärtende, duktile Schmiedestähle mit erhöhten Mangangehalten (LHD Schmiedestahl), 2016

Stieben, Andreas

[Contribution to a book]
Heat treatment. 3.1 Introduction
In: Induction heating : heating | hardening | annealing | brazing | welding / Bernard Nacke, Egbert Baake (editors), 2016

Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Coal structure and its influence on the conversion behavior at the raceway conditions
In: II МЕЖДУНАРОДНАЯ НАУЧНО-ПРАКТИЧЕСКАЯ КОНФЕРЕНЦИЯ СТУДЕНТОВ : МЕТАЛЛУРГИЯ XXI СТОЛЕТИЯ ГЛАЗАМИ МОЛОДЫХ : СБОРНИК ДОКЛАДОВ, 2016

Ho, Hai Thong
Babich, Alexander

[Contribution to a book, Contribution to a conference proceedings]
IP-Werkzeugstahl : Alternative Legierungskonzepte für Werkzeugstähle: Substitution von sonderkarbidbildenden Elementen durch intermetallische Phasen
In: Tagungsband zum BMBF-FORUM MATRESSOURCE : Mittwoch, 28. September 2016 (öffentlich) Donnerstag, 29. September 2016 (Teils NICHT-öffentlich) an der Technischen Universität Darmstadt, 2016

Zimmermann, Alexander
Bleck, Wolfgang
Danisch, C.
Eger, K.
Troost, G.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einsatz von Biomasse in der Stahlmetallurgie
In: Beiträge zur DGMK-Fachbereichstagung "Konversion von Biomassen und Kohlen", 9.-11. Mai 2016 in Rotenburg a.d. Fulda : (Autorenmanuskripte) / DGMK, Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas und Kohle e.V., Fachbereich Kohlen- und Biomasseveredlung; Organisationskomitee: R. Abraham, ThyssenKrupp Industrial Solutions GmbH, Dortmund; Prof. Dr. F. Behrendt, TU Berlin; Dipl.-Ing. D. Bräkow, FEE e.V., Berlin; Dr. H. Doloszeski, DGMK e.V., Hamburg; Dr.-Ing. R. Elsen, RWE Power AG, Essen; Prof. Dr. M. W. Haenel, Mülheim a.d.R.; Prof. Dr. W. Klose, Berlin; Dr. S. Krzack, TU Bergakademie Freiberg; Dr. H.-J. Mühlen, Blue Tower GmbH, Herten; Dr. M. Specht, ZSW Stuttgart, 2016

Babich, Alexander
Senk, Dieter Georg
Schwarz, Matthias

[Contribution to a book, Contribution to a conference proceedings]
Effects of High Strain Rates on Ductile Slant Fracture Behaviour of Pipeline Steel: Experiments and Modelling
In: Proceedings of the 11th International Pipeline Conference - 2016 : presented at 2016 11th International Pipeline Conference, September 26-30, 2016, Calgary, Alberta, Canada / sponsored by IPTI, an ASME institute. - Volume 3: Operations, monitoring and maintenance; materials and joining, 2016
[DOI: 10.1115/IPC2016-64332]

Hojjati, Reza
Steinhoff, Matthias
Cooreman, Steven
Van den Abeele, Filip
Verleysen, Patricia

[Contribution to a conference proceedings]
Control of the mechanical behavior of high Mn steels by extrinsic and intrinsic parameters
In: Advanced metal forming processes in automotive industry : the 5th international Lower Silesia-Saxony conference : AutoMetForm, 28-29 June 2016, Wroclaw, Poland : the conference materials / edited by: Zbigniew Gronostajski ; Department of Metal Forming and Metrology, Faculty of Mechanical Engineering, Wrocław University of Technology; Institute of Metal Forming, TU Bergakademie Freiberg; Fraunhofer Institute for Machine Tools anf forming Technology, IWU Chemnitz, 2016

Bleck, Wolfgang
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Towards prediction of coal conversion behavior in the blast furnace
In: 7th European coke and ironmaking congress - ECIC 2016: proceedings ; Linz, 12-14 September 2016, 2016

Ho, Hai Thong
Babich, Alexander
Senk, Dieter Georg
Frank, Jana

[Contribution to a book, Contribution to a conference proceedings]
A combined finite element - phase field model approach on the bainitic transformation
In: European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, May 11-13, 2016, Prague : proceedings / ATZK, Association for the Heat Treatment of Metals, 2016

Said Schicchi, D.
Lin, Mingxuan
Prahl, Ulrich
Hunkel, M.

[Contribution to a book, Contribution to a conference proceedings]
Low alloyed secondary hardening steel with intermetallic phases
In: Proceedings of the 10th International Tool Conference : TOOL, 10th International TOOL Conference : 04th to 07th October 2016, Bratislava, Slovakia / conference chairman: Frantisek Simancik, Slovak Academy of Sciences ; ASMET, The Austrian Society for Metallurgy and Materials, 2016

Zimmermann, Alexander
Bleck, Wolfgang
Eger, Kathrin
Danisch, Claus
Troost, Gunther
et al.

[Contribution to a book]
Fatigue Modeling: From Microstructure to Component Scale
In: Handbook of software solutions for ICME / edited by Georg J. Schmitz and Ulrich Prahl, 2016
[DOI: 10.1002/9783527693566.ch2-9]

Sharaf, Mohamed
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Investigation of microstructure of coals for injection and its influence on the conversion behaviour
In: SCANMET V : 5th International Conference on Process Development in Iron and Steelmaking : 12-15 June 2016, Luleå, Sweden / Swerea MEFOS, 2016

Ho, Hai Thong
Babich, Alexander
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Usage of biomass in cokemaking
In: SCANMET V : 5th International Conference on Process Development in Iron and Steelmaking : 12-15 June 2016, Luleå, Sweden / Swerea MEFOS, 2016

Schwarz, Matthias
Babich, Alexander
Senk, Dieter
Sadiku, Valdet
Gbadebo, Prince

[Contribution to a conference proceedings]
Productivity in Science and Team Diversity : An exploratory study
In: [12th International Conference on Webometrics, Informetrics, and Scientometrics (WIS) and the 17th COLLNET Meeting 2016, COLLNET 2016, 2016-12-12 - 2016-12-15, Nancy, France], 2016

Sharma, Mamta
Dahmen, Kirsten
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
Lufthärtender duktiler Stahl mit mittlerem Mangangehalt für die Massivumformung
In: Massivumformung, 2016 (September), 50-55, 2016

Stieben, Andreas
Bleck, Wolfgang
Schönborn, Steffen

[Contribution to a book, Contribution to a conference proceedings]
Damage and fracture loci for a dual-phase steel and a high-strength low-alloyed steel: Revealing the different plastic localization-damage-ductile fracture pattern
In: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ... - B, 2016
[DOI: 10.1063/1.4963638]

Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
The impact of hydrogen on the formability of AHSS in Nakajima tests
In: ESAFORM 2016 : proceedings of the 19th International ESAFORM Conference on Material Forming : Nantes, France, 27-29 April 2016 / editors: Francisco Chinesta, Elias Cueto, Emmanuelle Abisset-Chavanne; sponsoring organisations ESI Group ... - B, 2016
[DOI: 10.1063/1.4963626]

Gao, Qi
Han, Fei
Wortberg, Daniel
Bleck, Wolfgang
Liewald, Mathias

[Journal Article]
Estimation of local properties in welded joints using samples with simulated microstructure
In: International journal of structural integrity, 7 (6, SI), 739-747, 2016
[DOI: 10.1108/IJSI-10-2015-0047]

Kucharczyk, Pawel
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Effective Flow Curves of ferrite/pearlite microstructures and their use in cutting simulations of steel gears
In: ECCOMAS Congress 2016 : VII European Congress on Computational Methods in Applied Sciences and Engineering : proceedings / M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) ; European Community on Computational Methods in Applied Sciences. - Volume 1-4, 2016

Laschet, Gottfried
Kripak, Viktor
Texeira, Andre
Döbbeler, Benjamin
Klocke, Fritz
et al.

[Contribution to a book, Contribution to a conference proceedings]
Validation of a Concept for Burst Pressure Prediction by Damage Mechanics
In: Proceedings of the ASME Pressure Vessels and Piping Conference - 2016 : presented at the ASME 2016 Pressure Vessels and Piping Conference, July 17-21, 2016, Vancouver, BC, Canada / sponsored by the Pressure Vessels and Piping Division, ASME. - Volume 6: Materials and fabrication / principal editors: Weiju Ren, Xian-Kui Zhu, Andrew Duncan, A, 2016
[DOI: 10.1115/PVP2016-63236]

Brinnel, Victoria
Schaffrath, Simon
Münstermann, Sebastian
Feldmann, Markus

[Contribution to a book, Journal Article]
Ressourcenkritische Legierungselemente einsparen : Neue Konzepte für Werkzeugstähle
In: RWTH-Themen, 2016 (2), 54-58, 2016

Bleck, Wolfgang
Zimmermann, Alexander

[Contribution to a book, Journal Article]
Stahlkochen mit Kirschkernen : Unkonventionelle Einsatzstoffe für die Eisen- und Stahlmetallurgie
In: RWTH-Themen, 2016 (2), 60-63, 2016

Babich, Alexander
Schwarz, Matthias
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Safety assessment of steels under ULCF loading conditions with damage mechanics model
In: 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy / Edited by Francesco Iacoviello, Luca Susmel, Donato Firrao and Giuseppe Ferro, 2016
[DOI: 10.1016/j.prostr.2016.06.082]

Di, Yidu
Novokshanov, Denis
Münstermann, Sebastian

[Contribution to a book]
Nachhaltigkeit durch Schlackenverarbeitung - Wärmerückgewinnung und Trockengranulation
In: Mineralische Nebenprodukte und Abfälle : Aschen, Schlacken, Stäube und Baurestmassen / Karl J. Thomé-Kozmiensky. - Band 3, 2016

Firsbach, Felix
Senk, Dieter

[Book]
Ironmaking, 2016

Babich, Alexander
Senk, Dieter
Gudenau, Heinrich Wilhelm

[Dissertation / PhD Thesis]
A damage mechanics model for a carbon steel under complex loading conditions, 2016

Wu, Bo

[Dissertation / PhD Thesis]
Pyrometallurgische Raffinationspotenziale von Cu-Schrott und Minimierung der Wertmetallverluste in den Prozessschlacken, 2016

Zander, Marco

[Journal Article]
Effects of Ash Amount and Molten Ash’s Behavior on Initial Fe-C liquid Formation Temperature due to Iron Carburization Reaction
In: Tetsu-to-hagane, 102 (12), 677-683, 2016
[DOI: 10.2355/tetsutohagane.TETSU-2016-050]

Ohno, Ko-ichiro
Tsurumaru, Shohei
Babich, Alexander
Maeda, Takayuki
Senk, Dieter
et al.

[Journal Article]
Experimental and numerical study on shear-punch test of 6060 T6 extruded aluminum profile
In: International journal of mechanical sciences, 118, 205-218, 2016
[DOI: 10.1016/j.ijmecsci.2016.09.008]

Qian, Lingyun
Paredes, Marcelo
Wierzbicki, Tomasz
Sparrer, Yannik
Feuerstein, Martin
et al.

[Journal Article]
Austenite Evolution and Solute Partitioning during Thermal Cycling in the Intercritical Range of a Medium-Mn Steel
In: Steel research international, 87 (12), 1686-1693, 2016
[DOI: 10.1002/srin.201600050]

Tzini, Maria-Ioanna
Sarafoglou, Panagiota
Stieben, Andreas
Haidemenopoulos, Gregory
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Untersuchung des Konvektionseinflusses bei der Erstarrung hochmanganhaltigen Stahls mit Hilfe der Phasenfeld Methode, 2016

Schankies, Christian

[Contribution to a book, Journal Article]
The Second Blind Sandia Fracture Challenge: improved MBW model predictions for different strain rates
In: International journal of fracture, 198 (1), 149-165, 2016
[DOI: 10.1007/s10704-016-0097-7]

Di, Yidu
Lian, Junhe
Wu, Bo
Vajragupta, Napat
Novokshanov, Denis
et al.

[Contribution to a book, Journal Article]
The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading
In: International journal of fracture, 198 (1), 5-100, 2016
[DOI: 10.1007/s10704-016-0089-7]

Boyce, B. L.
Kramer, S. L. B.
Bosiljevac, T. R.
Corona, E.
Moore, J. A.
et al.

[Journal Article]
A combined experimental and numerical approach to a discrete description of indirect reduction of iron oxide
In: Metallurgia italiana, 2016 (3), 49-54, 2016

Peters, Bernhard
Hoffmann, F.
Senk, Dieter
Babich, Alexander
Hausemer, L.
et al.

[Dissertation / PhD Thesis]
Prozessführung und zyklisches Werkstoffverhalten von karbidfreien bainitischen Stählen, 2016

Wirths, Vera

[Journal Article]
Quantification of vanadium precipitates in HSLA steel by synchrotron X-ray absorption spectroscopy (XAS)
In: Materials testing, 58 (1), 5-11, 2016
[DOI: 10.3139/120.110802]

Suwanpinij, Piyada
Dickert, Hans Henning
Thammajak, Nirawat
Srichareonchai, Prasonk

[Journal Article]
Characterisation of mechanical behavior of 18CrNiMo7-6 steel with and without nb under warm forging conditions through processing maps analysis
In: Journal of materials processing technology, 237, 216-234, 2016
[DOI: 10.1016/j.jmatprotec.2016.05.021]

Springer, Phillip
Prahl, Ulrich

[Journal Article]
Effect of Material Processing and Imposed Mechanical Stress on the Magnetic, Mechanical, and Microstructural Properties of High-Silicon Electrical Steel
In: Steel research international, 87 (12), 1638-1647, 2016
[DOI: 10.1002/srin.201600039]

Leuning, Nora
Steentjes, Simon
Hameyer, Kay
Schulte, Markus
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Cold formability prediction by the modified maximum force criterion with a non-associated Hill48 model accounting for anisotropic hardening
In: Numisheet 2016: the 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes : part A - benchmark problems and results : part B - general papers : Bristol, United Kingdom, 4-9 September 2016 / editors: part A: Rui P.R. Cardoso, Jeong Whan Yoon and Robert E. Dick ; part B: Rui P.R. Cardoso, Eduardo Souza Neto, J.M.A Cesar de Sa and O.B. Adetoro, 2016
[DOI: 10.1088/1742-6596/734/3/032112]

Lian, Junhe
Ahn, D. C.
Chae, D. C.
Münstermann, Sebastian
Bleck, Wolfgang

[Journal Article]
The Effect of Bake-Hardening Parameters on the Mechanical Properties of Dual-Phase Steels
In: Steel research international, 87 (11), 1559-1565, 2016
[DOI: 10.1002/srin.201600060]

Ramazani, Ali
Brühl, Sonja
Abbasi, Mahmoud
Bleck, Wolfgang
Prahl, Ulrich

[Journal Article]
A crystal plasticity model for twinning- and transformation-induced plasticity
In: Acta materialia, 118, 140-151, 2016
[DOI: 10.1016/j.actamat.2016.07.032]

Wong, Su Leen
Madivala, Manjunatha
Prahl, Ulrich
Roters, Franz
Raabe, Dierk

[Journal Article]
Comparison Between Segregation of High-Manganese Steels from 2-D Phase-Field Simulations, 1-D Analytical Theories, and Solidification Experiments
In: Steel research international, 87 (9), 1179-1189, 2015
[DOI: 10.1002/srin.201500310]

Moraes Alves, Celso Luiz
Rezende, João Luiz Lopes
Senk, Dieter

[Dissertation / PhD Thesis]
Einfluss der Glühatmosphäre auf die Grenzschichtbildung von schmelztauchbeschichtetem Galvannealed-Feinblech, 2016

Yanik, Robert

[Dissertation / PhD Thesis]
Hot rolling of twin roll cast strips : insights into product quality and roll life, 2016

García, William Louis Kane

[Dissertation / PhD Thesis]
Neuartige Diffusionsschichten zum Oxidationsschutz ferritisch-martensitischer Stähle in wasserdampfhaltigen Atmosphären, 2016

Fähsing, Diana

[Dissertation / PhD Thesis]
Effects of strain amplitude, cycle number and orientation on low cycle fatigue microstructures in austenitic stainless steel and aluminum, 2016

Nellessen, Jens Arne

[Dissertation / PhD Thesis]
Thermische Randwerte für die numerische Simulation von Umformprozessen, 2016

Volles, Ralf

[Dissertation / PhD Thesis]
Tailor-made steels for high performance gearbox components, 2016

Bambach, Margarita Doncheva

[Contribution to a book, Contribution to a conference proceedings]
ICME-basiertes Legierungsdesign eines Dual-Phasen-Stahls für Zahnräder mit reduziertem Verzugspotential
In: 17. Roundtable Simulating Manufacturing : Tagungsband : 31. Mai-2. Juni 2016, Marburg / Simufact ; Herausgeber: Dr. Hendrik Schafstall und Michael Wohlmuth ; Schuler Pressen GmbH, 2016

Prahl, Ulrich

[Journal Article]
Neue Methoden des Werkstoffdesigns: „Stahl ab initio“ geht in die dritte Phase
In: Stahl und Eisen, 136 (5), 39-47, 2016

Bleck, Wolfgang
Brühl, Sonja

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Material Models and their Capability for Process and Material Properties Design in Different Forming Processes
In: Materials science forum, 854, 174-182, 2016
[DOI: 10.4028/www.scientific.net/MSF.854.174]

Schacht, Konstantin
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Modellierung des Gleitbruchs von mehrphasigen Stählen bei hohen Dehnraten
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 48. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16. und 17. Februar 2016, Freiburg / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Peter Hübner, Hochschule Mittweida University of applied Sciences, 2016

Könemann, Markus Josef
Münstermann, Sebastian
Kucharczyk, Pawel
Sodar, Dietmar

[Contribution to a book, Contribution to a conference proceedings]
Modellierung des duktilen Bruchs unter nichtproportionalen Belastungen
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 48. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16. und 17. Februar 2016, Freiburg / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Peter Hübner, Hochschule Mittweida University of applied Sciences, 2016

Wu, Bo
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
2nd Sandia Fracture Challenge: Ein Wettbewerb für Schädigungsmechaniker
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 48. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16. und 17. Februar 2016, Freiburg / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Peter Hübner, Hochschule Mittweida University of applied Sciences, 2016

Di, Yidu
Lian, Junhe
Wu, Bo
Vajragupta, Napat
Novokshanov, Denis
et al.

[Contribution to a book, Contribution to a conference proceedings]
Entwicklung eines schädigungsmechanischen Spaltbruchmodells unter Berücksichtigung des Spannungszustandes und der Versagenswahrscheinlichkeit
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 48. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16. und 17. Februar 2016, Freiburg / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Peter Hübner, Hochschule Mittweida University of applied Sciences, 2016

Golisch, Georg
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Bauteilsicherheit von Druckbehältern aus hochfesten Stählen - Demonstration im Berstversuch und numerische Vorhersage
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 48. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16. und 17. Februar 2016, Freiburg / DVM Deutscher Verband für Materialforschung und -prüfung e.V. ; Obmann: Prof. Dr.-Ing. Peter Hübner, Hochschule Mittweida University of applied Sciences, 2016

Brinnel, Victoria
Schaffrath, Simon
Münstermann, Sebastian
Feldmann, Markus

[Journal Article]
Development and application of a microstructure-based approach to characterize and model failure initiation in DP steels using XFEM
In: Materials science and engineering / A, 660, 181-194, 2016
[DOI: 10.1016/j.msea.2016.02.090]

Ramazani, A.
Abbasi, M.
Kazemiabnavi, S.
Schmauder, S.
Larson, R.
et al.

[Contribution to a book, Journal Article]
Vom Atom zum Bauteil
In: Jahresmagazin Ingenieurwissenschaften, 2016, 36-45, 2016

Bleck, Wolfgang

[Dissertation / PhD Thesis]
Materials design of high nitrogen manganese austenitic stainless TWIP steels for strip casting, 2016

Mosecker, Linda

[Journal Article]
Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steel
In: Journal of magnetism and magnetic materials : MMM, 417, 42-48, 2016
[DOI: 10.1016/j.jmmm.2016.05.049]

Leuning, Nora
Steentjes, Simon
Schulte, Markus
Bleck, Wolfgang
Hameyer, Kay

[Book, Dissertation / PhD Thesis]
Investigation of the heat transfer condition between mould and strand, 2016

Yang, Li

[Dissertation / PhD Thesis]
Experimentelle und simulationsgestützte Studien der Würfelkeimbildung basierend auf EBSD Untersuchungen, 2016

Sukhopar, Olga

[Contribution to a book, Contribution to a conference proceedings]
Microalloyed Engineering Steels with Improved Performance
In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 ; Conference Proceedings ; November 11-13th, 2015 , Hangzhou, Zhejiang Province, China / organized by: The Chinese Society for Metals (CSM) and Chinese Academy of Engineering (CAE), 2016
[DOI: 10.1002/9781119223399.ch8]

Bleck, Wolfgang
Bambach, Margarita
Wirths, Vera

[Contribution to a book, Contribution to a conference proceedings]
Neue Methoden der Werkstoffentwicklung am Beispiel hoch Mangan legierter Stähle
In: Ideen Form geben : 31. ASK Umformtechnik, 10.-11. März 2016, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 2016

Bleck, Wolfgang

[Journal Article]
Quantitative isothermal phase-field simulations of peritectic phase transformation in Fe-Mn system
In: Journal of materials research and technology, 5 (1), 84-91, 2016
[DOI: 10.1016/j.jmrt.2015.11.007]

Moraes Alves, Celso Luiz
Rezende, João Luiz Lopes
Senk, Dieter
Kundin, Julia

[Journal Article]
Grain Boundary Strengthening in High Mn Austenitic Steels
In: Metallurgical and materials transactions / A, 47 (5), 1918-1921, 2016
[DOI: 10.1007/s11661-016-3399-5]

Kang, Jee-Hyun
Duan, Shanghong
Kim, Sung-Joon
Bleck, Wolfgang

[Journal Article]
The effect of martensite banding on the mechanical properties and formability of TRIP steels
In: Materials science and engineering / A, 651, 160-164, 2015
[DOI: 10.1016/j.msea.2015.10.111]

Ramazani, Ali
Quade, Hendrik
Abbasi, M.
Prahl, Ulrich

[Journal Article]
On the Microstructure and Properties of a High Al-Alloyed 100Cr6 Steel
In: Steel research international, 87 (3), 364-375, 2015
[DOI: 10.1002/srin.201500068]

Bambach, Margarita
Stieben, Andreas
Bleck, Wolfgang

[Journal Article]
Strengthening Improvement on Gear Steels
In: Steel research international, 87 (5), 608-613, 2015
[DOI: 10.1002/srin.201500155]

Mengaroni, S.
Bambach, Margarita
Cianetti, Filippo
Bleck, Wolfgang
Neri, S.

[Journal Article]
Tailoring the Hardening Behavior of 18CrNiMo7-6 via Cu Alloying
In: Steel research international, 87 (5), 550-561, 2015
[DOI: 10.1002/srin.201500129]

Bambach, Margarita
Bleck, Wolfgang
Kramer, Hendrik S.
Klein, Marcus
Eifler, Dietmar
et al.

[Dissertation / PhD Thesis]
Investigation of Mould Filling and Solidification during Ingot Casting Process with Experiments and OpenFOAM Numerical Modelling, 2016

Zhang, Xiaohuan

[Journal Article]
Ab initio-guided design of twinning-induced plasticity steels
In: MRS bulletin, 41 (04), 320-325, 2016
[DOI: 10.1557/mrs.2016.63]

Raabe, Dierk
Roters, Franz
Neugebauer, Jörg
Gutierrez-Urrutia, Ivan
Hickel, Tilmann
et al.

[Journal Article]
Equal-channel angular pressing and annealing of a twinning-induced plasticity steel: Microstructure, texture, and mechanical properties
In: Acta materialia, 107, 239-253, 2016
[DOI: 10.1016/j.actamat.2016.01.056]

Haase, Christian
Kremer, Oliver
Hu, Weiping
Ingendahl, Tobias
Lapovok, Rimma
et al.

[Journal Article]
Software Solutions for ICME
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 68 (1), 70-76, 2016
[DOI: 10.1007/s11837-015-1718-8]

Schmitz, Georg J.
Engstrom, A.
Bernhardt, R.
Prahl, Ulrich
Adam, L.
et al.

[Journal Article]
Industrial Needs for ICME
In: JOM : journal of metals, 68 (1), 59-69, 2016
[DOI: 10.1007/s11837-015-1704-1]

Konter, A. W. A.
Farivar, Hamidreza
Post, J.
Prahl, Ulrich

[Journal Article]
Development of a New Concept for Hot-Rolled Weathering-DP Steel: Thermo-mechanical Simulation, Microstructure Adjustment, and Mechanical Properties
In: Steel research international, 87 (1), 68-78, 2015
[DOI: 10.1002/srin.201500108]

Allam, Tarek
Bleck, Wolfgang

[Journal Article]
Nitrogen Solubility in High-Manganese Steel Grades
In: Steel research international, 87 (1), 107-111, 2015
[DOI: 10.1002/srin.201400557]

Senk, Dieter
Christmann, Kevin
Geimer, Stephan
Rzehak, Dominik

[Journal Article]
A constitutive model for the tensile behaviour of TWIP steels : Composition and temperature dependencies
In: Materials and design, 90, 340-349, 2015
[DOI: 10.1016/j.matdes.2015.10.126]

Kang, Jee-Hyun
Ingendahl, Tobias
Bleck, Wolfgang

[Journal Article]
Conversion of injected waste plastics in blast furnace
In: Ironmaking & steelmaking, 43 (1), 11-21, 2016
[DOI: 10.1179/1743281215Y.0000000042]

Babich, Alexander
Senk, Dieter
Knepper, Marco
Benkert, S.

[Journal Article]
Steigerung der Leistungsfähigkeit und Zuverlässigkeit hochbeanspruchter Bauteile
In: Konstruktion, 68 (1/2), IW14-IW15, 2016

Bleck, Wolfgang
Hessling, Götz
Bambach, Margarita
Dickert, Hans Henning
Stieben, Andreas
et al.

[Dissertation / PhD Thesis]
Texture and microstructure evolution during deformation and annealing of high-manganese TWIP steels, 2016

Haase, Christian

[Journal Article]
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 68 (3), 943-949, 2016
[DOI: 10.1007/s11837-015-1764-2]

Jägle, Eric A.
Sheng, Zhendong
Wu, Liang
Lu, Lin
Risse, Jeroen
et al.

[Journal Article]
Experimental and numerical investigation into iron ore reduction in packed beds
In: Chemical engineering science, 140, 189-200, 2015
[DOI: 10.1016/j.ces.2015.09.017]

Peters, B.
Hoffmann, F.
Senk, Dieter
Babich, Alexander

[Dissertation / PhD Thesis]
Direct hot rolled dual phase weathering steel, 2016

Allam, Tarek

[Journal Article]
On the applicability of recovery-annealed Twinning-Induced Plasticity steels : Potential and limitations
In: Materials science and engineering / A, Structural materials, 649, 74-84, 2016
[DOI: 10.1016/j.msea.2015.09.096]

Haase, Christian
Ingendahl, Tobias
Güvenç, Onur
Bambach, Markus
Bleck, Wolfgang
et al.

[Dissertation / PhD Thesis]
Segregation driven phase transformation in medium Mn steel, 2016

Kuzmina, Margarita

[Report]
High Performance Components (HiPerComp) : Innovative Konzepte zur Steigerung der Leistungsfähigkeit und Zuverlässigkeit hochbeanspruchter Bauteile : Zentrale Ergebnisse zum DFG/AiF-Gemeinschaftsvorhaben, 2015

Bleck, Wolfgang Peter
Heßling, Götz Reinhold
Bambach, Margarita
Dickert, Hans Henning
Stieben, Andreas
et al.

[Report]
Werkstoff- und Prozessentwicklung von mikrolegierten AFP-Stählen mittels gekoppelter Thermodynamik und Mikrostrukturmodellierung (Nb-Schmiedesimulation) : Abschlussbericht : Laufzeit: 01.08.2011-31.01.2015, 2015

Bleck, Wolfgang Peter
Schacht, Konstantin

[Journal Article]
A combined experimental and numerical approach to a discrete description of indirect reduction of iron oxide
In: Metallurgia italiana, 2016 (3), 49-54, 2015

Peters, B.
Hoffmann, F.
Senk, Dieter
Babich, Alexander
Hausemer, L.
et al.

[Contribution to a book, Contribution to a conference proceedings]
A Hybrid Damage Mechanics Model to Predict the Impact Toughness of Structural Steel
In: Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference : October 21 - 23, 2015, Shanghai / org. by the Chinese Society for Metals, Baosteel Group Corporation, 2015

Münstermann, Sebastian
Golisch, Georg
Wu, Bo

[Contribution to a book, Contribution to a conference proceedings]
Iron Ore Sintering Process with Biomass Utilization
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Mousa, Elsayed
Babich, Alexander
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
New Bainitic Steel for Cyclic Loaded Safety Parts with Improved Cyclic Material Behaviour
In: 3rd International Conference on Material and Component Performance under Variable Amplitude Loading (VAL 2015) : Prague, Czech Republic, 23 - 26 March 2015 / ed.: Jan Papuga ..., 2015
[DOI: 10.1016/j.proeng.2015.02.020]

Elek, Lars
Wagener, Rainer
Kaufmann, Heinz
Wirths, Vera
Melz, Tobias

[Contribution to a book, Contribution to a conference proceedings]
A combined experimental and numerical approach to a discrete description of indirect reduction of iron oxide
In: SteelSim 2015 : 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; Bardolino, Garda Lake, Italy, 23 - 25 September 2015 / organized by AIM, Associazione Italiana di Metallurgia, 2015

Peters, B.
Hoffmann, F.
Senk, Dieter
Babich, Alexander
Hausemer, L.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Dynamic simulation models for analysis, optimisation and online control of the vacuum tank degassing process
In: SteelSim 2015 : 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; Bardolino, Garda Lake, Italy, 23 - 25 September 2015 / organized by AIM, Associazione Italiana di Metallurgia, 2015

Kleimt, Bernd
Pierre, Ralf
Senk, Dieter
Christmann, Kevin
Lachmund, Helmut
et al.

[Book]
Berichtsband, 2015

Bleck, Wolfgang
Brühl, Sonja

[Contribution to a book, Contribution to a conference proceedings]
The Modeling Scheme to Investigate the Influence of Galvanneal Coating on Fracture Properties of AHSS Steels
In: 10th International Conference on Zinc and Zinc Alloy Coated Steel, Galvatech 2015, 2015

Vajragupta, Napat
Münstermann, Sebastian
Goodwin, Frank
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Quantitative Analyse feinkörniger, komplexer und mehrphasiger Mikrostrukturen, 2015

Fischer, Martin

[Book, Dissertation / PhD Thesis]
Werkstoffe in Nordrhein-Westfalen : Ansätze zur Steigerung der Innovations- und Entwicklungsfähigkeit der Werkstoffbranche am Beispiel der Kunststoffindustrie, 2015

Cremer, Harald

[Book, Dissertation / PhD Thesis]
Investigations on microsegregation and peritectic phase transformation with and without elastic effects utilizing phase field method, 2015

Moraes Alves, Celso Luiz

[Journal Article]
Herstellung massiver metallischer Gläser aus kristallinen Gefügen durch lokales kleinvolumiges Umschmelzen
In: Materialwissenschaft und Werkstofftechnik, 46 (6), 613-620, 2015
[DOI: 10.1002/mawe.201500348]

Kripak, Viktor
Olschok, Simon
Otten, Christian
Spirgatis, Tim
Reisgen, Uwe
et al.

[Contribution to a book, Contribution to a conference proceedings]
5000 m3 Furnaces for Fresh Liquid Iron
In: 10th European Conference on Industrial Furnaces and Boilers : INFUB ; Gaia (Porto), Hotel Holiday Inn Gaia, Portugal, 7 - 10 April 2015 / , Gaia (Porto) : , 2015,, 2015

Babich, Alexander
Senk, Dieter

[Book, Dissertation / PhD Thesis]
In-situ-Charakterisierung von Entstehung und Bestandteilen von Q in einem Si-legierten TRIP-Stahl, 2015

Rieger, Thomas

[Contribution to a book, Contribution to a conference proceedings]
Steel - AB Initio: Quantum Mechanics Guided Design of New Fe-Based Materials
In: Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME) : sponsored by TMS (The Minerals, Metals & Materials Society) ; held May 31-June 4, 2015, Cheyenne Mountain Resort, Colorado Springs, Colorado, USA / edited by Warren Poole [and 6 more], 2015
[DOI: 10.1002/9781119139508.ch6]

Song, Wenwen
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
ICME Towards Improved Understanding of Bainite in 100CR6
In: Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME) : sponsored by TMS (The Minerals, Metals & Materials Society) ; held May 31-June 4, 2015, Cheyenne Mountain Resort, Colorado Springs, Colorado, USA / edited by Warren Poole [and 6 more], 2015
[DOI: 10.1002/9781119139508.ch5]

Song, Wenwen
Bleck, Wolfgang
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Improvement of Mechanical Properties of Cold Rolled High Strength DP-Steels Using Laboratory Scale Process Simulations
In: Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference : October 21 - 23, 2015, Shanghai / org. by the Chinese Society for Metals, Baosteel Group Corporation, 2015

Roik, Jan
Yan, Bo
Zhang, Suoquan
Zhu, Xiaodong
Jiao, Sihai
et al.

[Contribution to a book, Contribution to a conference proceedings]
Nanoparticle coatings: Oxidation protection during press hardening
In: Hot sheet metal forming of high-performance steel : 5th International Conference, Toronto, Ont., Canada, May 31st until June 3rd 2015 ; proceedings / Kurt Steinhoff ... (Hrsg.), 2015

Tigges, Britta
Benfer, S.
Tenié, Alexander
Yekethaz, M.
Bleck, Wolfgang
et al.

[Contribution to a book, Contribution to a conference proceedings]
Unconventional Raw Materials for Ironmaking
In: Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference ; October 21 - 23, 2015, Shanghai ; org. by the Chinese Society for Metals, Baosteel Group Corporation, 2015

Babich, Alexander
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Knowledge Based Steel Design for Improved Formability
In: Proceedings of the 10th CSM Steel Congress & the 6th Baosteel Biennial Academic Conference : October 21 - 23, 2015, Shanghai / org. by the Chinese Society for Metals, Baosteel Group Corporation, 2015

Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Parametrisierung phänomenologischer Schädigungsmodelle durch virtuelle Experimente an statistisch repräsentativen Mikrostrukturmodellen
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : [Tagung Werkstoffprüfung 2015, 3. bis 4. Dezember 2015, Bad Neuenahr] / Deutsche Gesellschaft für Materialkunde e.V.Hrsg. von Michael Borsutzki ..., 2015

Münstermann, Sebastian
Wu, Bo
Vajragupta, Napat
Lian, Junhe

[Contribution to a conference proceedings]
Synthesis Gas Generation from Biomass
In: [XIX. ročník mezinárodní konference “energetika a životní prostředí” : 9. - 1 1. září 2015, Rožnov pod Radhoštěm], 2015

Schwarz, Matthias
Senk, Dieter
Babich, Alexander

[Contribution to a book]
Virtual Production Systems
In: Advances in production technology / ed. by Christian Brecher, 2015
[DOI: 10.1007/978-3-319-12304-2]

Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Schulz, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Comparison of contour-hatch and point-like scan strategy for manufacturing lattice structures by selective laser melting (SLM)
In: MSTAM 2014 : proceedings of the 1st International Symposium "Materials and Technology of Additive Manufacturing" taking place in Bremen, 27th to 28th May 2014, 2015

Merkt, Simon
Winkelmann, M.
Bültmann, Jan

[Contribution to a conference proceedings]
Experimental Examination of Coal Conversion in Shaft Furnaces
In: [XIX. ročník mezinárodní konference “energetika a životní prostředí” : 9. - 1 1. září 2015, Rožnov pod Radhoštěm], 2015

Ho, Hai Thong
Babich, Alexander
Senk, Dieter
Schwarz, Matthias

[Contribution to a conference proceedings]
Experimental Study on Waste Plastics Injection into the Blast Furnace
In: Металлургия XXI столетия глазами молодых, 2015

Knepper, Marco
Babich, Alexander

[Journal Article]
Die Zähigkeitscharakterisierung im Kerbschlagbiege- und Bruchmechanikversuch : über die Ursachen von unterschiedlichen Übergangstemperaturen
In: Giesserei, 102 (5), 30-37, 2015

Münstermann, Sebastian
Lian, Junhe
Döbereiner, Benedikt

[Journal Article]
Karbidfreie bainitische Schmiedestähle mit verbesserter Betriebsfestigkeit
In: Schmiede-Journal, 2015 (März), 28-32, 2015

Wirths, Vera
Elek, Lars
Bleck, Wolfgang
Wagener, Rainer
Melz, Tobias

[Journal Article]
Numerical derivation of strain-based criteria for ductile failure: Discussions on sensitivity and validity
In: Engineering fracture mechanics, 148, 421-440, 2015
[DOI: 10.1016/j.engfracmech.2015.07.068]

Brinnel, Victoria
Langenberg, Julius
Kordtomeikel, Frauke
Di, Yidu
Münstermann, S.

[Book, Dissertation / PhD Thesis]
Untersuchungen zur Wirkung von borhaltigen, mikrolegierten Stählen mit variierenden Mangangehalten auf die Heißduktilität, 2015

Brune, Tobias

[Contribution to a book]
Aus Kreislaufstoffen werden Produkte
In: Mineralische Nebenprodukte und Abfälle : Aschen, Schlacken, Stäube und Baurestmassen / Karl J. Thome̓-Kozmiensky. - Teil 2, 2015

Fisch, Thilo
Schmöle, Klaus Peter
Senk, Dieter

[Journal Article]
Editorial Comment on the Paper “Looking Back at Steel Research International and Its Future”
In: Steel research international, 86 (1), 9-9, 2015
[DOI: 10.1002/srin.201400531]

Bleck, Wolfgang

[Journal Article]
International High Manganese Steel Conference
In: Steel research international, 86 (10), 1126-1126, 2015
[DOI: 10.1002/srin.201500237]

Bleck, Wolfgang
Raabe, Dierk
Dong, Han

[Journal Article]
Phase transformations in a simulated hot stamping process of the boron bearing steel
In: Materials and design, 84, 18-24, 2015
[DOI: 10.1016/j.matdes.2015.06.108]

Nikravesh, M.
Naderi, M.
Akbari, G. H.
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Nanolaminate TRIP-TWIP martensitic matrix steels : design and characterization, 2015

Wang, Meimei

[Journal Article]
A multiscale perspective on the kinetics of solid state transformations with application to bainite formation
In: AIMS Materials Science, 2 (4), 319-345, 2015
[DOI: 10.3934/matersci.2015.4.319]

Hüter, Claas
Lin, Mingxuan
Schicchi, Diego
Hunkel, Martin
Prahl, Ulrich
et al.

[Contribution to a conference proceedings]
The Man of Sustainable Development in Iron Making : A Laudation to Heinrich-Wilhelm Gudenau
In: 2015 Sustainable Industrial Processing Summit & Exhibition (SIPS): Gudenau International Symposium, 04.-09.10.2015, Antalya, Türkei,, 2015

Senk, Dieter

[Contribution to a conference proceedings]
Potential in iron and steel slags by making use of in situ measurements and heat recovery
In: [The 8th European Slag Conference : 21st – 23rd October 2015, voestalpine Stahlwelt Linz, Austria], 2015

Firsbach, Felix
Ho, Hai Thong
Senk, Dieter

[Journal Article]
Mikrostrukturbasierte Modelle ermöglichen genauere Simulationsergebnisse bei mehrstufigen Schmiedeprozessen
In: Schmiede-Journal, 2015 (September), 30-36, 2015

Schacht, Konstantin
Prahl, Ulrich
Bleck, Wolfgang
Twickler, Michael
Settefrati, Amico
et al.

[Journal Article]
Betriebsfeste Schmiedestähle
In: Umformtechnik, 49 (8), 20-21, 2015

Wirths, Vera
Bleck, Wolfgang
Melz, Tobias
Wagener, Rainer

[Contribution to a book, Contribution to a conference proceedings]
Aufbau und Validierung eines instationären Pfannenmodells als Tool zur Nutzung in der Stahlproduktion - Berechnung und Messungen
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Kortzak, Katharina
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Phasenfeldsimulation der Erstarrung: Anwendungen zur Prozessoptimierung im Strangguss
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Rezende, João Luiz Lopes
Schankies, Christian
Moraes Alves, Celso Luiz
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Aktuelle Methoden für die Bestimmung von Seigerungsphänomenen und dem Reinheitsgrad in Stahlproben
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Fronk, Sebastian
Ho, Hai Thong
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Möglichkeiten der Energienutzung aus Synthesegasen des Wirbelschichtvergasers und der Hochofenschlacke
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Senk, Dieter ; Ho, Hai Thong 1. Aufl., Aachen : Mainz, 2015,, 2015

Schwarz, Matthias
Firsbach, Felix
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Prozesssteuerung zur energieeffizienten Vakuumbehandlung von Stahlschmelzen
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Lachmund, Helmut
Senk, Dieter
Christmann, Kevin
Kleimt, Bernd
Markus, Hans Peter
et al.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss von Gefüge-Inhomogenitäten auf die Heißduktilität während der Erstarrung von Manganstählen
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Brune, Tobias
Senk, Dieter
Münch, Steve
Steenken, Bernhard

[Contribution to a book, Contribution to a conference proceedings]
Intermetallische Phasen in neuen Stählen
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Bleck, Wolfgang
Zimmermann, Alexander
Song, Wenwen

[Contribution to a book, Contribution to a conference proceedings]
Beitrag zur Senkung der C02-Emissionen im Hochofen unabhängig vom Primärenergieverbrauch
In: Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen / Institut für Eisenhüttenkunde ; Institut für Bildsame Formgebung. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Hai Thong Ho], 2015

Babich, Alexander
Senk, Dieter

[Book, Report]
Energieeffiziente dynamische Vakuumbehandlung von Metallschmelzen (EffiDynVak) : Schlussbericht zu dem vom BMWi geförderten Verbundprojekt ; Laufzeit: 01.07.2011 - 31.03.2015, 2015

Markus, Hans Peter
Lange, Alexander
Lachmund, Helmut
Abdullah, Hellai
Kleimt, Bernd
et al.

[Contribution to a book, Journal Article]
Hochfeste Stähle für Transport und Lagerung von Gasen : neue Bemessungskonzepte ermöglichen erdbebensicheres Design
In: RWTH-Themen, 2015 (1), 28-29, 2015

Bleck, Wolfgang
Feldmann, Markus
Novokshanov, Denis
Schaffrath, Simon

[Contribution to a book]
Recent developments in blast furnace iron-making technology
In: Iron Ore : Mineralogy, Processing and Environmental Sustainability / Liming Lu, 2015
[DOI: 10.1016/B978-1-78242-156-6.00017-4]

Babich, A.
Senk, D.

[Book, Dissertation / PhD Thesis]
A generalised hybrid damage mechanics model for steel sheets and heavy plates, 2015

Lian, Junhe

[Contribution to a conference proceedings]
Schädigungsuntersuchungen an Stählen mit metastabilem Gefüge
In: [11. Tagung Gefüge und Bruch, 08.-10.04.2015, Leoben, Österreich. Veranst.: Institut für Werkstoffe der Ruhr-Universität Bochum ...], 2015

Bleck, Wolfgang

[Book, Proceedings]
Tagungsband zum 30. Aachener Stahlkolloquium Metallurgie : 3. und 4. September 2015, Tivoli Aachen
In: 30. Aachener Stahlkolloquium Metallurgie Aachen 2015-09-03 - 2015-09-04, 2015

Senk, Dieter
Ho, Hai Thong

[Journal Article]
A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm
In: Engineering fracture mechanics, 148, 281-303, 2015
[DOI: 10.1016/j.engfracmech.2015.07.069]

Novokshanov, Denis
Döbereiner, Benedikt
Sharaf, Mohamed
Münstermann, Sebastian
Lian, Junhe

[Journal Article]
A Novel Approach for Utilization of Ultra-Fines Iron Ore in Sintering Process
In: Steel research international, 86 (11), 1350-1360, 2015
[DOI: 10.1002/srin.201400368]

Mousa, Elsayed A.
Babich, Alexander
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Air Hardened Ductile Forging Steels with Medium Manganese Content
In: Conference proceedings of the 4th International Conference of Engineering Against Failure : Skiathos Island, 24 - 26 June 2015 / Laboratory of Technology and Strength of Materials, University of Patras, Hellas. Conference chairmen: Sp. Pantelakis ..., 2015

Stieben, Andreas
Bleck, Wolfgang

[Journal Article]
Characterization of Microstructure and Mechanical Properties of Resistance Spot Welded DP600 Steel
In: Metals : open access journal, 5 (3), 1704-1716, 2015
[DOI: 10.3390/met5031704]

Ramazani, Ali
Mukherjee, Krishnendu
Abdurakhmanov, Aydemir
Abbasi, Mahmoud
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Effects of carbonaceous material’s ash on iron carburization at initial reaction stage
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Ohno, Ko-ichiro
Tsurumaru, Shohei
Maeda, Takayuki
Kunitomo, Kazuya
Babich, Alexander
et al.

[Contribution to a book, Contribution to a conference proceedings]
Continuous Casting : Way of Unlimited Options
In: ICS2015, Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (I), Beijing, China, May 12-14, 2015. Org. by The Chinese Society for Metals, 2015

Senk, Dieter Georg

[Contribution to a book, Contribution to a conference proceedings]
Influence of the Stress State on the Predictability of the Failure Probability in the Beremin Model
In: Damage Mechanics : Theory, Computation and Practice ; Selected, peer reviewed papers from the 2nd International Conference on Damage Mechanics (ICDM2), July 8-11, 2015, Troyes, France / edited by K. Saanouni, 2015
[DOI: 10.4028/www.scientific.net/AMM.784.403]

Golisch, Georg
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
A Comparative Study on the Formability Prediction of Steel Sheets by Anisotropic Models Based on Associated Flow Rule and Non-Associated Flow Rule
In: Key engineering materials, 651-653, 150-155, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.150]

Lian, Jun He
Ahn, Deok Chan
Chae, Dong Chul
Münstermann, Sebastian
Bleck, Wolfgang

[Journal Article]
Temperature effect on deformation mechanisms and mechanical properties of a high manganese C+N alloyed austenitic stainless steel
In: Materials science and engineering / A, 642, 71-83, 2015
[DOI: 10.1016/j.msea.2015.06.047]

Mosecker, L.
Pierce, D. T.
Schwedt, A.
Beighmohamadi, M.
Mayer, J.
et al.

[Contribution to a conference proceedings, Journal Article]
κ-Phase Formation in Fe-Mn-Al-C Austenitic Steels
In: Steel research international, 86 (10), 1161-1169, 2015
[DOI: 10.1002/srin.201400587]

Song, Wenwen
Zhang, Wei
von Appen, Jörg
Dronskowski, Richard
Bleck, Wolfgang

[Journal Article]
Effects of grain size on hydrogen embrittlement in a Fe-22Mn-0.6C TWIP steel
In: International journal of hydrogen energy, 40 (33), 10687-10696, 2015
[DOI: 10.1016/j.ijhydene.2015.06.112]

Zan, Na
Ding, Hua
Guo, XiaoFei
Tang, ZhengYou
Bleck, Wolfgang

[Book, Dissertation / PhD Thesis]
Untersuchungen zur konduktiven Erwärmung für Warmzugversuche an Blechen, 2015

Gerhardt, Kai

[Contribution to a book, Contribution to a conference proceedings]
Tailoring the microstructure for microalloyed carburizing steels by an ICME approach
In: Fundamentals and Applications of Mo and Nb Alloying in High Performance Steels : proceedings of the Second International Symposium on Fundamentals and Applications of Mo and Nb Alloying in High Performance Steels ; held in Jeju Island, South Korea, 24-26 April 2013 / Ed. by Hardy Mohrbacher. - Vol. 2, 2015

Konovalov, S.
Prahl, U.

[Contribution to a book, Contribution to a conference proceedings]
Modelling of Chip Breakage in Machining Process with Damage Mechanics Model
In: Damage Mechanics : Theory, Computation and Practice ; Selected, peer reviewed papers from the 2nd International Conference on Damage Mechanics (ICDM2), July 8-11, 2015, Troyes, France / edited by K. Saanouni, 2015
[DOI: 10.4028/www.scientific.net/AMM.784.411]

Wu, Bo
Yan, Yu Lin
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Phenomenological Modelling of Impact Toughness Transition Behaviour
In: [Damage Mechanics: Theory, Computation and Practice. Selected, peer reviewed papers from the 2nd International Conference on Damage Mechanics (ICDM2), July 8-11, 2015, Troyes, France / ed. by K. Saanouni], 2015
[DOI: 10.4028/www.scientific.net/AMM.784.27]

Münstermann, Sebastian
Kucharczyk, Pawel
Golisch, Georg
Döbereiner, Benedikt

[Contribution to a book, Contribution to a conference proceedings]
Interaction Between Injected Waste Plastics and Coke Bed in the Blast Furnace
In: Proceedings of the Iron & Steel Technology Conference : 4 - 7 May 2015, Cleveland, Ohio, U.S.A. / AIST, Association for Iron & Steel Technology. Ronal E. Ashburn, publisher, 2015

Babich, Alexander
Senk, Dieter
Benkert, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Qualification of electron beam welding on thick plates for applications in wind energy plant constructions
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Ufer, Sebastian
Olschok, Simon
Reisgen, Uwe
Golisch, Georg
Münstermann, Sebastian
et al.

[Journal Article]
Effect of Tempcore Processing on Mitigating Problems of Tramp Elements in Low C Steel Produced from Recycled Material
In: Journal of iron and steel research, international, 22 (7), 582-589, 2015
[DOI: 10.1016/S1006-706X(15)30043-1]

Ramadan, Ahmed
Shash, A. Y.
El-Mahallawi, I. S.
Senk, D.
Mattard, Taha

[Journal Article]
Evaluation of maximum non-metallic inclusion sizes in engineering steels by fitting a generalized extreme value distribution based on vectors of largest observations
In: Acta materialia, 95, 1-9, 2015
[DOI: 10.1016/j.actamat.2015.05.013]

Schmiedt, A. B.
Dickert, H. H.
Bleck, W.
Kamps, U.

[Journal Article]
Viscosity model for oxide melts relevant to fuel slags. Part 1: Pure oxides and binary systems in the system SiO2–Al2O3–CaO–MgO–Na2O–K2O
In: Fuel processing technology, 137, 93-103, 2015
[DOI: 10.1016/j.fuproc.2015.03.025]

Wu, Guixuan
Yazhenskikh, Elena
Hack, Klaus
Wosch, Erwin
Müller, Michael

[Journal Article]
Hot Ductility Behavior of Boron Containing Microalloyed Steels with Varying Manganese Contents
In: Metallurgical and materials transactions / B, 46 (3), 1400-1408, 2015
[DOI: 10.1007/s11663-015-0306-1]

Brune, Tobias
Senk, Dieter
Walpot, Raphael
Steenken, Bernhard

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Cold Formability of Automotive Sheet Metals : Anisotropy, Localization, Damage and Ductile Fracture
In: Key engineering materials, 639, 353-360, 2015
[DOI: 10.4028/www.scientific.net/KEM.639.353]

Lian, Jun He
Ahn, Deok Chan
Chae, Dong Chul
Münstermann, Sebastian
Bleck, Wolfgang

[Journal Article]
Effects of Ash Amount and Molten Ash’s Behavior on Initial Fe–C Liquid Formation Temperature due to Iron Carburization Reaction
In: ISIJ international, 55 (6), 1245-1251, 2015
[DOI: 10.2355/isijinternational.55.1245]

Ohno, Ko-ichiro
Tsurumaru, Shohei
Babich, Alexander
Maeda, Takayuki
Senk, Dieter
et al.

[Contribution to a book, Contribution to a conference proceedings]
Development of an air hardened forging steel with medium manganese content
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Stieben, Andreas
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
New Methods in Steel Design
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Role of Boron on the Formation of Internal Cracks in Microalloyed, High Manganese Steels for CC
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015

Brune, Tobias
Senk, Dieter
Alvarez de Toledo, G.
Komenda, J.
Stewart, B.

[Journal Article]
Improvement of the Blast Furnace Viscosity Prediction Model Based on Discrete Points Data
In: Metallurgical and materials transactions / B, 46 (1), 378-387, 2015
[DOI: 10.1007/s11663-014-0176-y]

Guo, Hongwei
Zhu, Mengyi
Li, Xinyu
Guo, Jian
Du, Shen
et al.

[Journal Article]
Constitutive modeling during simultaneous forming and quenching of a boron bearing steel at high temperatures
In: Journal of materials engineering and performance, 24 (2), 808-815, 2015
[DOI: 10.1007/s11665-014-1345-5]

Salari, S.
Naderi, M.
Bleck, W.

[Journal Article]
Spring back evaluation for high and ultra high strength sheet steels with the bending under tension machine
In: International journal of material forming, 8 (1), 137-144, 2015
[DOI: 10.1007/s12289-013-1155-6]

Melander, Arne
Thoors, Håkan
Stenberg, Niclas
Ning, Ma

[Journal Article]
Scalability of the mechanical properties of selective laser melting produced micro-struts
In: Journal of laser applications, 27 (S2), S29206, 2015
[DOI: 10.2351/1.4906392]

Bültmann, Jan
Merkt, Simon
Hammer, Christine
Hinke, Christian
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Designing new forging steels by ICMPE
In: Advances in Production Technology / edited by Christian Brecher, 2015
[DOI: 10.1007/978-3-319-12304-2_7]

Bleck, Wolfgang
Prahl, Ulrich
Hirt, Gerhard
Bambach, Markus

[Contribution to a book, Contribution to a conference proceedings]
Steel endurance : Towards an optimally fatigue-resistant microstructure
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 47. Tagung des DVM-Arbeitskreises Bruchvorgänge und Bauteilsicherheit, 10. und 11. Februar 2015, Freiberg / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Peter Hübner, 2015

Sharaf, Mohamed
Münstermann, Sebastian
Vajragupta, Napat
Kucharczyk, Pawel
Hartmaier, A.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Prediction of component failure with plasticity-damage coupled material model by implementing effective strain concept
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 47. Tagung des DVM-Arbeitskreises Bruchvorgänge und Bauteilsicherheit, 10. und 11. Februar 2015, Freiberg / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Peter Hübner, 2015

Di, Yidu
Novokshanov, Denis
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Multiscale modelling of the effect of texture on the plasticity and formability of automotive sheet metals
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 47. Tagung des DVM-Arbeitskreises Bruchvorgänge und Bauteilsicherheit, 10. und 11. Februar 2015, Freiberg / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Peter Hübner, 2015

Lian, Junhe
Ahn, D.
Chae, D.
Münstermann, Sebastian
Bleck, Wolfgang

[Journal Article]
Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity
In: Mechanics of materials, 84, 127-139, 2015
[DOI: 10.1016/j.mechmat.2015.01.019]

Bambach, M.
Heppner, S.
Steinmetz, D.
Roters, F.

[Contribution to a book, Contribution to a conference proceedings]
Einfluss der uniaxialen Vorstreckung auf die Zähigkeitseigenschaften des hochfesten Baustahls S690Q
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 47. Tagung des DVM-Arbeitskreises Bruchvorgänge, 10. + 11. Februar 2015, Freiberg / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Peter Hübner, 2015

Novokshanov, Denis
Pütz, Felix
Gillner, Karl
Münstermann, Sebastian

[Report]
Novel concepts for new generation of high strength hot dip galvanizing steel with extra formability (NEWGENHSS) : final report, 2015
[DOI: 10.2777/2856]

Ferro, Floriano
Arroyo, Amaia
Mangas, Angela
Guk, Sergey
Terzic, Adnan
et al.

[Report]
Innovative steel grades for exhaust applications in automotive industry (INSTAP) : Final report, 2015
[DOI: 10.2777/483800]

Bleck, Wolfgang
Robens, Eva
Gabellone, Davide
Rizzo, Leopoldo
Gouveia, Helena
et al.

[Journal Article]
Effect of High Tensile Strain Rate on the Evolution of Microstructure in Fe-Mn-C-Al Twinning-Induced Plasticity (TWIP) Steel
In: Metallurgical and materials transactions / A, 46 (1), 6-11, 2015
[DOI: 10.1007/s11661-014-2654-x]

Das, Tuhin
Saha, Rajib
Bera, Supriya
Dahmen, Kirsten
Ghosh, Mainak
et al.

[Journal Article]
Evaluation of the cold formability of high-strength low-alloy steel plates with the modified Bai-Wierzbicki damage model
In: International journal of damage mechanics, 24 (3), 383-417, 2015
[DOI: 10.1177/1056789514537587]

Lian, J.
Wu, J.
Münstermann, S.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Characterization of Local Deformation in Welded Joints Using a Combined Experimental and Numerical Approach
In: Key engineering materials, 627, 241-244, 2015
[DOI: 10.4028/www.scientific.net/KEM.627.241]

Kucharczyk, Pawel
Münstermann, Sebastian

[Journal Article]
Phase-Field Modeling of the Dendrite Growth Morphology with Influence of Solid-Liquid Interface Effects
In: Steel research international, 86 (1), 65-72, 2015
[DOI: 10.1002/srin.201300398]

Rezende, Joao
Senk, Dieter
Hüttenmeister, Dennis

[Journal Article]
Mechanical Properties, Formability, and Corrosion Behavior of Dual Phase Weathering Steels Developed by an Inter-Critical Annealing Treatment
In: Steel research international, 86 (3), 231-240, 2015
[DOI: 10.1002/srin.201400033]

Allam, Tarek
Abbas, Mahmoud

[Contribution to a book, Journal Article]
Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression tests
In: Journal of laser applications, 27 (S1), S17006, 2015
[DOI: 10.2351/1.4898835]

Merkt, S.
Hinke, C.
Bültmann, J.
Brandt, M.
Xie, Y. M.

[Journal Article]
A Three Dimensional Model to Characterize the Centerline Segregation in CC Slabs
In: Steel research international, 86 (1), 33-39, 2015
[DOI: 10.1002/srin.201400015]

Brune, Tobias
Kortzak, Katharina
Senk, Dieter
Reuther, Nils
Schäperkötter, Markus

[Contribution to a book]
The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts
In: Advances in Production Technology / edited by Christian Brecher, 2015
[DOI: 10.1007/978-3-319-12304-2_9]

Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Stollenwerk, Jochen Hugo

[Dissertation / PhD Thesis]
Mikrostruktur und mechanische Eigenschaften umgeschmolzener weichmartensitischer Stähle, 2015

Nick, Eva-Maria

[Dissertation / PhD Thesis]
The inheritance of different microstructures found after hot rolling on the properties of a completely annealed DP-steel, 2015

Schemmann, Lars

[Dissertation / PhD Thesis]
Quality of as cast ingots with extreme large shapes, 2015

Chen, Zhiye

[Book, Dissertation / PhD Thesis]
Die Wirtschaftlichkeit des Einsatzes hochlegierter Werkstoffe im Kraftwerksbau, 2015

Berker, Ralf Erich

[Dissertation / PhD Thesis]
Erstarrungsverhalten und Erstarrungsbeeinflussung von Stählen im System Fe-Mn-C(-Al), 2015

Schweinichen, Petrico Phillip Erich Burgmann von

[Dissertation / PhD Thesis]
Entwicklung einer Anlage zur amorphen Erstarrung flüssiger Hochofenschlacke mit gleichzeitiger Wärmerückgewinnung, 2015

Hüttenmeister, Dennis

[Dissertation / PhD Thesis]
Untersuchung der Wärmeleitfähigkeit von Warmarbeitsstählen, 2015

Meurisse, Emeline

[Dissertation / PhD Thesis]
Designing ductile martensitic steel microstructures via localised austenite formation controlled by tailored chemical gradients, 2015

Belde, Michael

[Dissertation / PhD Thesis]
The microstructure influence on fatigue life variability in structural steels, 2015

Sharaf, Mohamed Aly Mohamed

[Dissertation / PhD Thesis]
The artificial microstructure model and its applications on plasticity and damage of the dual phase steel, 2015

Vajragupta, Napat

[Report]
Schmiedestähle mit verbesserter Betriebsfestigkeit durch verformungsinduzierte Phasenumwandlung, 2014

Wirths, Vera
Elek, Lars

[Journal Article]
Thermal conductivity of silicene from first-principles
In: Applied physics reviews, 104 (13), 131906, 2014
[DOI: 10.1063/1.4870586]

Xie, Han
Hu, Ming
Bao, Hua

[Dissertation / PhD Thesis]
Einflussfaktoren auf das Sprödbruchverhalten im Fallgewichtsversuch, 2014

Scholl, Sebastian

[Journal Article]
Application of vanadium precipitation for lower rolling force and enhanced strength of hot strip steel
In: Archives of materials science and engineering, 70 (1), 39-44, 2014

Suwanpinij, Piyada
Dickert, Hans Henning

[Book]
Special Issue: Multiscale Modeling
In: Steel research international, 85 (6), 2014

Bleck, Wolfgang
Pietrzyk, Maciej

[Contribution to a book, Journal Article]
Editorial
In: Steel research international, 85 (6), 945-945, 2014
[DOI: 10.1002/srin.201400030]

Bleck, Wolfgang
Pietrzyk, Maciej

[Journal Article]
Editorial
In: Steel research international, 85 (12), 1587-1587, 2014
[DOI: 10.1002/srin.201400243]

Bleck, Wolfgang

[Contribution to a book]
Wärmebehandeln : Einleitung
In: Induktives Erwärmen : Wärmen, Härten, Glühen, Löten, Schweißen / Bernard Nacke ; Egbert Baake (Hrsg.), 2014

Bleck, Wolfgang

[Journal Article]
Stahlmetallurgie : Neue Herausforderungen durch die Werkstoffentwicklung
In: Stahl und Eisen, 134 (11), 110-121, 2014

Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Phase-field investigation of the influence of the solid-liquid interface energy, chemical composition and forced convection on the dendrite growth morphology for high manganese steels
In: Proceedings : 8th ECCC ; European Continuous Casting Conference, 2014

Rezende, João Luiz Lopes
Schankies, Christian
Moraes Alves, Celso Luiz
Hüttenmeister, Dennis
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Characterization and description of final solidification and centerline segregation in thick CC slabs
In: Proceedings : 8th ECCC ; European Continuous Casting Conference, 2014

Brune, Tobias
Kortzak, Katharina
Senk, Dieter
Reuther, N.
Schäperkötter, M.

[Contribution to a book, Contribution to a conference proceedings]
Hot-ductility and precipitation behavior of boron in Nb-V-Ti microalloyed steels for CC
In: Proceedings : 8th eccc ; European Continuous Casting Conference ; 23-26 June2014, Graz, Austria, 2014

Brune, Tobias
Haberl, Felix
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Influence of composition and continuous casting parameters on the cracking of b-microalloyed high Mn steel grades
In: Proceedings : 8th ECCC ; European Continuous Casting Conference, 2014

Alvarez de Toledo, G.
Komenda, J.
Stewart, B.
Brune, Tobias
Frisk, K.

[Contribution to a conference proceedings]
Designing new gear steels by ICME
In: [EERA-Wind Workshop on „Metals in Wind Turbines – Challenges & Ideas“, 21.11.2014-21.11.2014, Roskilde, Denmark], 2014

Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a conference proceedings]
Numerical Steel Design by ICME
In: [IKYDA 2014 ICME Workshop, 14.10.2014-14.10.2014, Volos, Greece], 2014

Prahl, Ulrich

[Contribution to a conference proceedings]
Integrative Computational Materials and Production Engineering for Steels : die Entwicklung von Stählen und Prozessen am Rechner
In: [Colloquium Materials Modelling, 03.07.2014-03.07.2014, Stuttgart, Germany], 2014

Prahl, Ulrich

[Contribution to a conference proceedings]
Numerical Alloy Design for Case Hardening Steels with DP microstructure
In: [ThermoCalc User’s Meeting, 05.09.2013-06.09.2013, Aachen, Germany], 2014

Farivar, Hamidreza
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Integrated Simulation of Precipitation and Grain Size Evolution during Carburizing
In: Proceedings of CoE-Conference 2014 Integrative Production Technology for High-Wage Countries / Christian Brecher, Cathrin Wesch-Potente (Eds.), 2014

Fayek, P.
Prahl, U.

[Conference Presentation]
Scalability of the mechanical properties of slm produced micro-struts
In: 33rd International Congress on Applications of Lasers & Electro-Optics San Diego, CA 2014-10-19 - 2014-10-23, 2014

Bültmann, Jan
Merkt, Simon
Hammer, Christine
Hinke, Christian
Prahl, Ulrich

[Contribution to a book]
Scientific Cooperation Engineering in the Cluster of Excellence Integrative Production Technology for High-Wage Countries at RWTH Aachen University
In: Automation, Communication and Cybernetics in Science and Engineering 2013/2014 / edited by Sabina Jeschke, Ingrid Isenhardt, Frank Hees, Klaus Henning, 2014
[DOI: 10.1007/978-3-319-08816-7_9]

Jooß, Claudia
Welter, Florian
Leisten, Ingo
Richert, Anja
Schaar, Anne Kathrin
et al.

[Contribution to a conference proceedings]
Effects of Al on delayed fracture in TWIP steels : discussion from the aspects of structure homogeneity, hydrogen traps, and corrosion resistance
In: SteelyHydrogen 2014 : 5 - 7 May 2014 - Ghent ; conference proceedings ; 2nd International Conference on Metals and Hydrogen / ed. OCAS, 2014

Guo, Xiaofei
Schwedt, Alexander
Richter, Silvia
Bleck, Wolfgang

[Book]
Werkstoffkunde Stahl für Studium und Praxis, 2014

Bleck, Wolfgang
Angel, S.
Brühl, F.
Dahmen, K.
Diederichs, R.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Simulation, optimization and control of microstructure evolution during hot rolling of multiphase steels
In: Sbornik dokladov Meždunarodnogo Naučno-Techničeskogo Kongressa "OMD 2014: Fundamentalʹnye Problemy, Innovacionnye Materialy i Technologii" = Proceedings of the International Science & Technology Congress "OMD 2014: The Fundamental Problems, Innovative Materials and Technologies" / Nacionalʹny Issledovatelʹskij Technologičeskij Universitet "MISiS" ... . - Č. 2, 2014

Prahl, Ulrich
Suwanpinij, Piyada
Togobytska, Nataliya
Hömberg, Dietmar
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
New design tools for new cold formable steels
In: Sbornik dokladov Meždunarodnogo Naučno-Techničeskogo Kongressa "OMD 2014: Fundamentalʹnye Problemy, Innovacionnye Materialy i Technologii" = Proceedings of the International Science & Technology Congress "OMD 2014: The Fundamental Problems, Innovative Materials and Technologies" / Nacionalʹny Issledovatelʹskij Technologičeskij Universitet "MISiS" ... - Č. 2, 2014

Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
European Activities towards ICME
In: Proceedings of CoE-Conference 2014 Integrative Production Technology for High-Wage Countries / Christian Brecher, Cathrin Wesch-Potente (Eds.), 2014

Schmitz, G. J.
Prahl, Ulrich

[Contribution to a conference proceedings]
Microalloyed Gear Steels for High Temperature Carburising
In: [Workshop “Microstructure evolution in advanced structural materials”, 31.03.2014-31.03.2014, Delft, Netherlands], 2014

Prahl, Ulrich

[Conference Presentation]
Numerical Steel Design by ICME : Options and Challenges
In: 29. Aachener Stahlkolloquium Aachen 2014-03-27 - 2014-03-28, 2014

Prahl, Ulrich

[Contribution to a conference proceedings]
Steel Design by Integrated Computational Materials Engineering (ICME)
In: [VDI-AWT-Seminar, 29.01.2014-29.01.2014, Bremen, Germany], 2014

Prahl, Ulrich

[Contribution to a conference proceedings]
Beiträge zur Simulation der Gefügeentwicklung in Prozessketten der Massivumformung
In: [Simulation in der Umformtechnik, 13.02.2014-14.02.2014, Stuttgart, Germany], 2014

Prahl, U.
Konovalov, S.
Schacht, K.
Fayek, P.

[Contribution to a book, Contribution to a conference proceedings]
Neue Bewertungskonzepte für erdbebenbeanspruchte Stahlbaukonstruktionen
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : Werkstoffeinsatz, Qualitätssicherung und Schadensanalyse ; [Tagung Werkstoffprüfung 2014, 04. bis 05. November 2014, Berlin] / Deutsche Gesellschaft für Materialkunde e.V. Hrsg. von Wolfgang Grellmann ; Holger Frenz, 2014

Münstermann, S.
Novokshanov, D.
Di, Yidu

[Preprint]
Modeling of grain boundary dynamics using amplitude equations, 2014

Hüter, Claas
Neugebauer, Jörg
Boussinot, Guillaume
Svendsen, Bob
Prahl, Ulrich
et al.

[Contribution to a book, Contribution to a conference proceedings]
Strip casting and ingot casting : comparison of different cooling conditions regarding the as-cast quality
In: Proceedings : 8th eccc ; European Continuous Casting Conference ; 23-26 June 2014, Graz, Austria, 2014

Daamen, Markus
von Schweinichen, Petrico
Richter, Silvia
Hirt, Gerhard
Senk, Dieter

[Dissertation / PhD Thesis]
Numerische Entwicklung eines mikrolegierten Einsatzstahls für die Hochtemperatur-Aufkohlung, 2014

Konovalov, Sergey

[Book]
Aufgabensammlung für die Eisen- und Stahlmetallurgie, 2014

Senk, Dieter
Babich, Alexander

[Abstract, Contribution to a conference proceedings]
Blast Furnace Technology with Pulsating Parameters
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Senk, Dieter
Klock, Rainer
Babich, Alexander
Gudenau, Heinrich Wilhelm

[Abstract, Contribution to a conference proceedings]
Development and evaluation of a new dynamic BOF model close to industrial practice
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Schöne, D.
Lachmund, H.
Bannenberg, N.
Senk, Dieter

[Abstract, Contribution to a conference proceedings]
Reduction behaviour of iron ore agglomerates using coke oven gas
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Mousa, Elsayed
Babich, Alexander
Senk, Dieter

[Abstract, Contribution to a conference proceedings]
Behaviour of Boron and Manganese in Nb-V-Ti Microalloyed Steels for Continuous Casting
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Brune, Tobias
Senk, Dieter
Alvarez de Toledo, G.
Komenda, J.
Frisk, K.
et al.

[Journal Article]
Review on fracture and crack propagation in weldments : a fracture mechanics perspective
In: Engineering fracture mechanics, 132, 200-276, 2014
[DOI: 10.1016/j.engfracmech.2014.05.012]

Zerbst, U.
Ainsworth, R. A.
Beier, H. Th.
Pisarski, H.
Zhang, Z. L.
et al.

[Book]
Technologie und Sicherheitsgewinnung beim Feuerverzinken zum Ausbau der Marktposition des verzinkten Stahlbaus : IGF-Nr. 265 ZBG = Examination of hot dip galvanizing of welded steel products with respect to safe construction and development of market position in the steel construction market, 2014

Feldmann, Markus
Nüsse, Gregor
Schäfer, Dirk
Bleck, Wolfgang
Pohl, Michael
et al.

[Book, Report]
ULCOS top gas recycling blast furnace process (ULCOS TGRBF) : final report, 2014
[DOI: 10.2777/59481]

van der Stel, J.
Hattink, M.
Zeilstra, C.
Louwerse, G.
Hirsch, A.
et al.

[Journal Article]
Interaction between Co-injected Substances with Pulverized Coal into the Blast Furnace
In: ISIJ international, 54 (12), 2704-2712, 2014
[DOI: 10.2355/isijinternational.54.2704]

Babich, Alexander
Senk, Dieter
Born, Stefan

[Contribution to a book, Contribution to a conference proceedings]
Conversion Behaviour by Multiple Injection Into the Blast Furnace Tuyere
In: AISTech 2014 : Proceedings; 5-8 May 2014, Indiana Convention Center, Indianapolis, Ind., USA / Association for Iron & Steel Technology, 2014

Babich, Alexander
Senk, Dieter
Born, Stefan

[Contribution to a book, Contribution to a conference proceedings]
Optimierte Schädigungsbeschreibung in FVK : Übertragung eines metallbasierten Schädigungsmodells auf Matrixwerkstoffe
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : Werkstoffeinsatz, Qualitätssicherung und Schadensanalyse ; [Tagung Werkstoffprüfung 2014, 04. bis 05. November 2014, Berlin] / Deutsche Gesellschaft für Materialkunde e.V. Hrsg. von Wolfgang Grellmann ; Holger Frenz, 2014

Brinnel, Victoria
Wille, Marcel
Bleck, Wolfgang
Marder, J.
Hopmann, C.
et al.

[Journal Article]
Mathematical Analysis of the Reduction of Wüstite at Different Basicity Using Factorial Design
In: Journal of metallurgy, 2014, 201659, 2014
[DOI: 10.1155/2014/201659]

Mousa, Elsayed

[Contribution to a conference proceedings]
Characterisation and simulation of X60 elbow pipes in case of ULCF loading
In: 11th World Congress on Computational Mechanics, WCCM XI, 5th European Congress on Computational Mechanics, ECCM V, 6th European Congress on Computational Fluid Dynamics, ECFD VI : Barcelona, Spain, July 20 - 25, 2014; [program] / organized by SEMNI, Spanish Association for Numerical Methods in Engineering in its 25th anniversary. Eugenio Oñate ... (eds.), 2014

Schaffrath, Simon
Novokshanov, Denis
Eichler, Björn
Münstermann, Sebastian

[Dissertation / PhD Thesis]
Beitrag zur Einzelfunkenauswertung mittels optischer Emissionsspektrometrie (PDA-OES) zur schnellen Charakterisierung des Stahl-Reinheitsgrades, 2014

Weerts, Hubert

[Abstract, Contribution to a conference proceedings]
Microstructural characterization of automotive grade steel using x-ray diffraction after deforming at varying strain rates
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)] v, 2014

Anand, Kunjan Kumar
Ghosh Chowdhury, Sandip
Dahmen, Kirsten
Berlia, Rohit
Kumar, Ashok
et al.

[Contribution to a conference proceedings]
Interfacial reactions between slag and melt in the new world of high manganese steels
In: EPD Congress 2014 : proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd annual meeting & exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / ed. by: James Yurko ..., 2014

Peymandar, Mohammad
Schmuck, Sebastian
von Schweinichen, Petrico
Senk, Dieter

[Abstract, Contribution to a conference proceedings]
Hot-Ductility Behavior of Microalloyed High Manganese Steels
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Brune, Tobias
Senk, Dieter
Steenken, Bernhard

[Contribution to a book]
Überblick über aktuelle Forschungsvorhaben zur Rückgewinnung der thermischen Energie aus flüssiger Hochofenschlacke
In: Mineralische Nebenprodukte und Abfälle : Aschen, Schlacken, Stäube und Baurestmassen / Karl J. Thomé-Kozmiensky, 2014

Hüttenmeister, Dennis
Senk, Dieter

[Abstract, Contribution to a conference proceedings]
Prediction of strain hardening behavior in high manganese steels by deformation mechanism maps
In: High manganese steels 2014 : the 2nd international conference ; (2nd HMnS) ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Song, Wenwen
Huang, Hai
Prahl, Ulrich
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Solubility and removal of hydrogen and nitrogen in high Mn steels
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Senk, Dieter
Christmann, Kevin

[Abstract, Contribution to a conference proceedings]
Influence of recrystallization on the microstructure and mechanical properties of High Manganese TWIP / TRIP steels
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Madivala, Manjunatha
Schwich, Hannah
Schwedt, Alexander
Bleck, Wolfgang
Prahl, Ulrich

[Abstract, Contribution to a conference proceedings]
H-delayed Fracture of Deep Drawn TWIP Steel
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Lee, Sangwon
de Cooman, Bruno C.
Guo, Xiaofei
Saeed-Akbari, Alireza
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Temperature and Composition Dependence of Localised Deformation in High Mn Steels
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Kang, JeeHuyn
Ingendahl, Tobias
Prahl, Ulrich
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Material Behavior of High-Manganese Steel after Laser Welding
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Ingendahl, Tobias
Unruh, Klaus
Yang, L.
Verhaeghe, G.
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Delayed fracture behavior of a hot dip galvanized Fe-15Mn-2Al-0.5C TWIP steel in corrosive environments
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Guo, Xiaofei
Wang, Dong
Kim, Sung-kyu
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Microstructures and mechanical behavior of Fe-Mn-Al-C steels at different strain rates
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Ding, H.
Wu, Z. Q.
Han, D.
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Fracture and crack propagation resistance of High Manganese TWIP Steels: Experimental evaluation
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Casellas, D.
Madivala, Manjunatha
Lara, A.
Calvo, J.
Cabrera, J. M.
et al.

[Abstract, Contribution to a conference proceedings]
Forging steels with carbide free bainite for high service fatigue life properties
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Wirths, Vera
Bleck, Wolfgang
Wagener, Rainer
Melz, Tobias

[Contribution to a book, Contribution to a conference proceedings]
Air hardened ductile forging steels with medium-manganese
In: New materials for vehicle components : AutoMetForm/SFU 2014 : November 3rd to 5th 2014, Freiberg, Saxony : conference proceedings / TU Bergakademie Freiberg, imf, Technische Universität Bergakademie Freiberg, ACATRAIN e.V, Verein für Weiterbildung an der TU Bergakademie Freiberg ; Herausgeber: Institut für Metallumformung, Prof. Dr.-Ing. Prof. E.h.mult R. Kawalla, 2014

Stieben, Andreas
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Influence of Model Parameters on the Flow Stress Prediction using Rate Laws for Dislocation Density and Dynamic Recrystallization
In: Warm and Hot Forming : 7th Forming Technology Forum ; proceedings ; September 15 - 16, 2014, Enschede, the Netherlands / Herausgeber: Faculty of Engineering Technology, University of Twente, Enschede. Ton van den Boogaard, 2014

Schacht, Konstantin
Simushkin, Alexey
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Influence of thermal process control on microstructure and properties of Nb alloyed PH-steels
In: New materials for vehicle components : AutoMetForm/SFU 2014 : November 3rd to 5th 2014, Freiberg, Saxony : conference proceedings / TU Bergakademie Freiberg, imf, Technische Universität Bergakademie Freiberg, ACATRAIN e.V, Verein für Weiterbildung an der TU Bergakademie Freiberg ; Herausgeber: Institut für Metallumformung, Prof. Dr.-Ing. Prof. E.h.mult R. Kawalla, 2014

Schacht, Konstantin
Heizmann, Jochen
Sharma, Mamta
Bleck, Wolfgang
Prahl, Ulrich

[Abstract, Contribution to a conference proceedings]
Cu-Alloying of 18CrNiMo7-6 for Increasing the Damage Tolerance of Gear Components
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Bambach, Margarita
Stieben, Andreas
Bleck, Wolfgang

[Abstract, Contribution to a conference proceedings]
Steel ab initio : New Methods for the Design of High Strength Cold Formable Steels
In: 1st Estad & 31st JSI : abstract booklet ; [1st European Steel Technology & Application Days (ESTAD) and the 31st Journées Sidérurgiques Internationales (JSI)] ; 7 - 8 April 2014, Paris, 2014

Bleck, Wolfgang

[Journal Article]
Characterization and Modeling of Failure Initiation in Bainite-Aided DP Steel
In: Advanced engineering materials, 16 (11), 1370-1380, 2014
[DOI: 10.1002/adem.201300556]

Ramazani, Ali
Chang, Yuling
Prahl, Ulrich

[Journal Article]
Reduction Behavior of Self-Reducing Pellet (SRP) for Low Height Blast Furnace
In: Steel research international, 85 (11), 1501-1509, 2014
[DOI: 10.1002/srin.201300399]

Kowitwarangkul, Pruet
Babich, Alexander
Senk, Dieter

[Proceedings]
High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings, 2014

Bleck, Wolfgang
Raabe, Dierk

[Contribution to a conference proceedings]
Vorstellung eines schädigungsmechanischen Materialmodells zur Beschreibung des Tieflagenverhaltens ferritischer Stähle
In: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen : 46. Tagung des DVM-Arbeitskreises Bruchvorgänge, 11. + 12. Februar 2014, Kassel / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Peter Hübner, 2014

Golisch, Georg
Hosten, Andrea
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Untersuchung der Sicherheitsanforderungen und Steigerung des Zähigkeitsangebotes von Elektronen-Strahl geschweißten Stahlkonstruktionen für Offshore-Anwendungen
In: Schweißen in der maritimen Technik und im Ingenieurbau : 14. Tagung, 15. und 16. April 2014 in Hamburg / GSI SLV Nord, [Schweißtechnische Lehr- und Versuchsanstalt Nord] ..., 2014

Ufer, Sebastian
Olschok, Simon
Reisgen, Uwe
Golisch, Georg
Münstermann, Sebastian
et al.

[Contribution to a conference proceedings]
EcoForge - Prozessintegrierte Wärmebehandlung bainitischer Stähle
In: „Industrie und Wissenschaft – Gemeinsam die Zukunft gestalten“ : 21. Umformtechnisches Kolloquium ; UKH 2014 ; Hannover, 26.-27. Februar 2014 / HFF, Hannoversches Forschungsinstitut für Fertigungsfragen; IFUM, Institut für Umformtechnik und Umformmaschinen, Universität Hannover. Hrsg.: Bernd-Arno Behrens, 2014

Bucquet, Thibaud
Gulpak, M.
Egorov, Fedor
Garbrecht, Martin
Hoja, Timo
et al.

[Contribution to a conference proceedings]
From microstructures to nanostructures : materials and process design for new steels
In: Proceedings / European Conference on Heat Treatment and 21st IFHTSE congress ; May, 12th - 15th, 2014, Munich, Germany / [hosted by Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e.v. (AWT)]. Ed. by Hans-Werner Zoch, ..., 2014

Bleck, Wolfgang

[Dissertation / PhD Thesis]
Behavior of self-reducing pellets (SRP) for the use in a low height blast furnace, 2014

Kowitwarangkul, Pruet

[Journal Article]
Influencing parameters on elastic modulus of steels
In: Canadian metallurgical quarterly, 53 (3), 264-273, 2014
[DOI: 10.1179/1879139514Y.0000000127]

Münstermann, Sebastian
Feng, Yujie
Bleck, Wolfgang

[Journal Article]
EcoForge : Energieeffiziente Prozesskette zur Herstellung von Hochleistungs-Schmiedebauteilen
In: HTM - journal of heat treatment and materials, 69 (4), 209-219, 2014
[DOI: 10.3139/105.110220]

Fischer, Martin
Dickert, Hans-Henning
Bleck, Wolfgang
Huskic, Adis
Kazhai, Mohammad
et al.

[Dissertation / PhD Thesis]
Efficient approach to fine particle separation using mechanical stirring by a fluctuating magnetic field, 2014

Ishida, Kyohei

[Patent]
Kaltgewalztes Stahlflachprodukt für Tiefziehanwendungen und Verfahren zu seiner Herstellung, 2014

Dorner, Dorothée
Hofmann, Harald
Höckling, Christian
Miller, Magnus
Schirmer, Matthias
et al.

[Journal Article]
Investigation on new steel grades for construction of wind energy mills for sustainable energy supply
In: Metallurgical research & technology, 111 (3), 147-153, 2014
[DOI: 10.1051/metal/2014025]

Golisch, G.
Münstermann, S.
Bleck, W.
Ufer, S.
Reisgen, U.
et al.

[Contribution to a conference proceedings, Journal Article]
A method to quantitatively upscale the damage initiation of dual-phase steels under various stress states from microscale to macroscale
In: Computational materials science, 94 (SI), 245-257, 2014
[DOI: 10.1016/j.commatsci.2014.05.051]

Lian, Junhe
Yang, Hanqi
Vajragupta, Napat
Münstermann, Sebastian
Bleck, Wolfgang

[Journal Article]
Impact of short-range ordering on yield strength of high manganese austenitic steels
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 614, 122-128, 2014
[DOI: 10.1016/j.msea.2014.07.016]

Kang, Jee-Hyun
Ingendahl, Tobias
von Appen, Jörg
Dronskowski, Richard
Bleck, Wolfgang

[Contribution to a conference proceedings]
Reduction Kinetics of Self-Reducing Pellets of Iron Ore
In: Proceedings of the Iron & Steel Technology Conference : 5 - 8 May 2014, Indianapolis, Indiana, U.S.A. / AIST, Association for Iron & Steel Technology. Ronald E. Ashburn, publisher. - Vol. 1, 2014

Kowitwarangkul, Pruet
Babich, Alexander
Senk, Dieter

[Dissertation / PhD Thesis]
Characterization and simulation of bainite transformation in high carbon bearing steel 100Cr6, 2014

Song, Wenwen

[Contribution to a book, Contribution to a conference proceedings]
Untersuchung der Sicherheitsanforderungen und Steigerung des Zähigskeitsangebotes von elektronenstrahlgeschweißten Stahlkonstruktionen für Offshore-Anwendungen
In: DVS-Congress 2014 : Große Schweißtechnische Tagung - DVS Studentenkongress ; Vorträge der Veranstaltungen in Berlin am 15.und 16. Sept. 2014, 2014

Ufer, Sebastian
Olschok, Simon
Reisgen, Uwe
Golisch, Georg
Münstermann, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings]
Nb microsegregation and redistribution during casting and forging in Al-free case hardening steel
In: Ingot casting, rolling & forging : ICRF, ingot casting, rolling and forging 2014 ; 2nd International Conference ; Milan, Italy, 7 - 9 May 2014 / organised by AIM, Associazione Italiana di Metallurgia, 2014

Konovalov, Sergey
Sharma, Mamta
Prahl, Ulrich

[Contribution to a conference proceedings]
Investigation of cleanliness and inclusion distribution in quasi-industrial large ingot
In: Ingot casting, rolling & forging : ICRF, ingot casting, rolling and forging 2014 ; 2nd International Conference ; Milan, Italy, 7 - 9 May 2014 / organised by AIM, Associazione Italiana di Metallurgia, 2014

Chen, Zhiye
Fronk, Sebastian
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
A Generalized Damage Model Accounting for Instability and Ductile Fracture for Sheet Metals
In: Key engineering materials, 611/612, 106-110, 2014
[DOI: 10.4028/www.scientific.net/KEM.611-612.106]

Lian, Junhe
Jia, Xiaoxu
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a book, Journal Article]
Optimal Control of a Cooling Line for Production of Hot Rolled Dual Phase Steel
In: Steel research international, 85 (9), 1328-1333, 2014
[DOI: 10.1002/srin.201300253]

Bleck, Wolfgang
Hömberg, Dietmar
Prahl, Ulrich
Suwanpinij, Piyada
Togobytska, Nataliya

[Contribution to a conference proceedings, Journal Article]
Modeling the microstructure influence on fatigue life variability in structural steels
In: Computational materials science, 94, 258-272, 2014
[DOI: 10.1016/j.commatsci.2014.05.059]

Sharaf, Mohamed
Kucharczyk, Pawel
Vajragupta, Napat
Münstermann, Sebastian
Hartmaier, A.
et al.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Characterizing ductile damage and failure : Application of the direct current potential drop method to uncracked tensile specimens
In: Procedia materials science, 3, 1161-1166, 2014
[DOI: 10.1016/j.mspro.2014.06.189]

Brinnel, Victoria
Döbereiner, Benedikt
Münstermann, Sebastian

[Contribution to a conference proceedings, Journal Article]
The modeling scheme to evaluate the influence of microstructure features on microcrack formation of DP-steel: The artificial microstructure model and its application to predict the strain hardening behavior
In: Computational materials science, 94, 198-213, 2014
[DOI: 10.1016/j.commatsci.2014.04.011]

Vajragupta, Napat
Wechsuwanmanee, Peerapon
Lian, Junhe
Sharaf, Mohamed
Münstermann, Sebastian
et al.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Modeling the Cold Formability of Dualphase Steels on Different Length Scales
In: Procedia materials science, 3, 1050-1055, 2014
[DOI: 10.1016/j.mspro.2014.06.171]

Münstermann, Sebastian
Lian, Junhe
Vajragupta, Napat

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
A Modified Lemaitre Damage Model Phenomenologically Accounting for the Lode Angle Effect on Ductile Fracture
In: Procedia materials science, 3, 1841-1847, 2014
[DOI: 10.1016/j.mspro.2014.06.297]

Lian, Junhe
Feng, Yuan
Münstermann, Sebastian

[Journal Article]
Utilisation of Residues of Nickel Production in EAF Steelmaking Route
In: ISIJ international, 54 (8), 1978-1982, 2014
[DOI: 10.2355/isijinternational.54.1978]

Hernández Ramírez, Aurelio
Mavrommatis, Konstantinos
Senk, Dieter
Zaragoza Valdés, Rogelio
Arteche Lopez, Eduardo
et al.

[Abstract, Contribution to a conference proceedings]
Impact of grain size on the formability of high manganese TWIP steels
In: High manganese steels 2014 : the 2nd international conference ; (2nd HMnS) ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 2014

Daamen, Markus
Nessen, Wiebke
Ingendahl, Tobias
Haase, Christian
Molodov, Dmitri A.
et al.

[Journal Article]
Control of Strain Hardening Behavior in High-Mn Austenitic Steels
In: Acta metallurgica Sinica / English letters, 27 (3), 546-556, 2014
[DOI: 10.1007/s40195-014-0084-9]

Song, Wenwen
Ingendahl, Tobias
Bleck, Wolfgang

[Journal Article]
Advanced High Strength Steels for the automotive industry – from microstructures to nanostructures
In: Stahl und Eisen, 134 (7), 25-34, 2014

Bleck, Wolfgang

[Contribution to a conference proceedings]
Mechanical properties and delayed fracture behavior of a hot dip galvanized Fe-15Mn-0.6C-2Al TWIP steel
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 2014

Guo, Xiaofei
Gao, Qi
Kim, Sung-kyu
Bleck, Wolfgang

[Contribution to a conference proceedings]
Alloying concepts and process strategies for UHSS with improved ductility
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 2014

Labudde, Thorsten
Kunze, Viktoria
Bleck, Wolfgang

[Contribution to a conference proceedings]
New ferritic stainless steel grade for exhaust manifold application
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 2014

Robens, Eva
Maillard, Romaric
Gabellone, Davide
Wieser, Helmut
Bleck, Wolfgang

[Contribution to a conference proceedings]
Characterization of cold formability of high-strength steels in bending tests
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 2014

Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
Bainitic Forging Steels for Cyclic Loading
In: THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA / Editors: B. Mishra, M. Ionescu and T. Chandra, 2014
[DOI: 10.4028/www.scientific.net/AMR.922.813]

Wirths, Vera
Wagener, Rainer
Bleck, Wolfgang
Melz, Tobias

[Contribution to a conference proceedings]
Carbide free bainitic forging steels with improved fatigue properties
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 2014

Wirths, Vera
Bleck, Wolfgang
Wagener, Rainer
Melz, Tobias

[Journal Article]
In Situ High Energy X-Ray Diffraction for Investigating the Phase Transformation in Hot Rolled TRIP-Aided Steels
In: Advanced engineering materials, 16 (8), 1044-1051, 2014
[DOI: 10.1002/adem.201300537]

Suwanpinij, Piyada
Stark, Andreas
Li, Xiaoxiao
Römer, Frank
Herrmann, Klaus
et al.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
18CrNiMo7-6 with TRIP-Effect for Increasing the Damage Tolerance of Gear Components. Part II: Microstructure and Mechanical Properties
In: Materials science forum, 783/786, 639-643, 2014
[DOI: 10.4028/www.scientific.net/MSF.783-786.639]

Bambach, Margarita
Stieben, Andreas
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
18CrNiMo7-6 with TRIP-Effect for Increasing the Damage Tolerance of Gear Components Part I: Alloy Design
In: Materials science forum, 783/786, 633-638, 2014
[DOI: 10.4028/www.scientific.net/MSF.783-786.633]

Bambach, Margarita
Stieben, Andreas
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Entwicklung von dichtereduzierten Feinblechstählen für Automobilanwendungen, 2014

Schwabe, Jonas

[Book]
Verbesserte Ausnutzung der Festigkeiten hochfester Druckbehälterstähle durch Erfassung des Grenzzustands der Tragfähigkeit mit Hilfe der Fließbruchmechanik, 2014

Bleck, Wolfgang
Münstermann, Sebastian
Schruff, Christian
Feldmann, Markus
Schäfer, Dirk
et al.

[Dissertation / PhD Thesis]
Einsatz torrefizierter Biomasse in der Wirbelzone des Hochofens, 2014

Arnsfeld, Sonja

[Journal Article]
The qualification of torrefied wooden biomass and agricultural wastes products for gasification processes
In: Journal of analytical and applied pyrolysis, 133-141, 2014
[DOI: 10.1016/j.jaap.2014.02.013]

Arnsfeld, Sonja
Senk, Dieter
Gudenau, Heinrich Wilhelm

[Journal Article]
Experimental and Numerical Investigations of the TRIP Effect in 1.4301Austenitic Stainless Steel Under Static Loading
In: Steel research international, 85 (5), 793-802, 2013
[DOI: 10.1002/srin.201300223]

Gupta, Satyapriya
Twardowski, Raphael
Kucharczyk, Pawel
Münstermann, Sebastian

[Journal Article]
Study the effect of martensite banding on the failure initiation in dual-phase steel
In: Computational materials science, 87, 241-247, 2014
[DOI: 10.1016/j.commatsci.2014.01.051]

Ramazani, Ali
Ebrahimi, Z.
Prahl, Ulrich

[Contribution to a conference proceedings]
Numerical determination of the local state of stress during the BDWTT by applying a damage mechanics model
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Döbereiner, Benedikt
Münstermann, Sebastian

[Contribution to a conference proceedings]
Multiscale modelling of the effect of texture on the plasticity and stretchability of automotive sheet metals
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang
Ahn, Deok-Chan
Chae, Dong-Chul

[Contribution to a conference proceedings]
Materials Design of High-Nitrogen Stainless TWIP Steels for Strip Casting
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Mosecker, Linda
Bleck, Wolfgang

[Contribution to a conference proceedings]
Bainitic forging steels
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Wirths, Vera
Bleck, Wolfgang
Wagener, Rainer
Melz, Tobias

[Contribution to a conference proceedings]
Nano precipitates in high carbon bearing steel 100Cr6
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Song, Wenwen
Bleck, Wolfgang
Vainio, U.

[Contribution to a conference proceedings]
Steel Endurance: A Numerical Solution to the Fatigue Problem
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Sharaf, Mohamed

[Contribution to a conference proceedings]
The artificial microstructure model and its application
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Vajragupta, Napat

[Contribution to a conference proceedings]
Component Design with Damage Mechanics
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Münstermann, Sebastian
Lian, Junhe

[Contribution to a conference proceedings]
Development of Lightweight Fe-Al Steel by Micro Alloying of Rare Earth Elements
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Schwabe, Jonas
Hofmann, Harald
Heller, Thomas
Zimmermann, Alexander
Bleck, Wolfgang

[Contribution to a conference proceedings]
Development of Damage Tolerant Steels for High Performance Components
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Bambach, Margarita
Bleck, Wolfgang

[Contribution to a conference proceedings]
Challenges in the Mechanical Characterization of High Manganese Steels
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Ingendahl, Tobias
Dahmen, Kirsten
Batsch, Julia

[Contribution to a conference proceedings]
Steel Metallurgy : challenged by materials
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Senk, Dieter

[Contribution to a conference proceedings]
Microstructure Development in Hot-Rolled Advanced High Strength Steels
In: Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings / ASK 29, Aachener Stahlkolloquium. IEHK ... [Wolfgang Bleck (ed.)], 2014

Bleck, Wolfgang
Prahl, Ulrich
Suwanpinij, Piyada

[Contribution to a conference proceedings, Journal Article]
Influence of the process temperature on the properties of friction stir welded blanks made of mild steel and aluminium
In: Key engineering materials, 611/612, 1429-1436, 2014
[DOI: 10.4028/www.scientific.net/KEM.611-612.1429]

Mertin, Chris
Naumov, Andreas
Mosecker, Linda
Bambach, Markus
Hirt, Gerhard

[Journal Article]
Utilization of Coke Oven Gas and Converter Gas in the Direct Reduction of Lump Iron Ore
In: Metallurgical and materials transactions / B, Process metallurgy and materials processing science, 45 (2), 617-628, 2014
[DOI: 10.1007/s11663-013-9978-6]

Mousa, Elsayed
Babich, Alexander
Senk, Dieter

[Contribution to a book, Journal Article]
Impact of the Microstructure on the U–O Forming Simulations of a Ferrite–Pearlite Pipeline Tube
In: Steel research international, 86 (6), 1083-1098, 2014
[DOI: 10.1002/srin.201300247]

Laschet, Gottfried
Shukla, Mohit
Henke, Thomas
Fayek, Patrick
Bambach, Markus
et al.

[Dissertation / PhD Thesis]
Einfluss der Kaltumformung auf die Korrosionsbeständigkeit metastabiler austenitischer nichtrostender Stähle, 2014

Seemann, Philipp

[Dissertation / PhD Thesis]
Numerische Modellierung dynamischer Belastungen von Stählen, 2014

Hosten, Andrea

[Journal Article]
Wear Behavior of Hardfacing Coatings Applied on Glass Processing Tools
In: Steel research international, 85 (4), 579-588, 2014
[DOI: 10.1002/srin.201300077]

Naderi, Malek
Mohammadi, Amir Hossein
Balaji, Ghuteh
Bleck, Wolfgang

[Journal Article]
ICMEg : the Integrated Computational Materials Engineering expert group ; a new European Coordination action
In: Integrating materials and manufacturing innovation, 3 (2), 2014
[DOI: 10.1186/2193-9772-3-2]

Schmitz, Georg J.
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Failure Initiation in Dual-Phase Steel
In: Key engineering materials, 586, 67-71, 2014
[DOI: 10.4028/www.scientific.net/KEM.586.67]

Ramazani, Ali
Schwedt, Alexander
Aretz, Anke
Prahl, Ulrich

[Journal Article]
Quantification of bake hardening effect in DP600 and TRIP700 steels
In: Materials and design, 57, 479-486, 2014
[DOI: 10.1016/j.matdes.2014.01.001]

Ramazani, Ali
Brühl, Sonja
Gerber, T.
Bleck, Wolfgang
Prahl, Ulrich

[Proceedings]
Steel in competition : materials science : 27. and 28. March 2014, Eurogress Aachen ; proceedings, 2014

Bleck, Wolfgang

[Journal Article]
Modelling the strain-induced precipitation kinetics of vanadium carbonitride during hot working of precipitation-hardened Ferritic–Pearlitic steels
In: Acta materialia, 71, 234-254, 2014
[DOI: 10.1016/j.actamat.2014.03.016]

Mukherjee, Monideepa
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
On the Spheroidized Carbide Dissolution and Elemental Partitioning in High Carbon Bearing Steel 100Cr6
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 45A (2), 595-606, 2014
[DOI: 10.1007/s11661-013-2048-5]

Song, Wenwen
Choi, Pyuck-Pa
Inden, Gerhard
Prahl, Ulrich
Raabe, Dierk
et al.

[Journal Article]
Effects of Charcoal Carbon Crystallinity and Ash Content on Carbon Dissolution in Molten Iron and Carburization Reaction in Iron-Charcoal Composite
In: Tetsu-to-hagane, 100 (2), 287-293, 2014
[DOI: 10.2355/tetsutohagane.100.287]

Ohno, Ko-ichiro
Babich, Alexander
Mitsue, Junki
Maeda, Takayuki
Senk, Dieter
et al.

[Journal Article]
Phase-Field Modeling of the Coarsening in Multi-component Systems
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 45A (2), 1068-1084, 2014
[DOI: 10.1007/s11661-013-1995-1]

Kundin, Julia
Rezende, João Luiz Lopes
Emmerich, Heike

[Journal Article]
Multivariate extreme value analysis and its relevance in a metallographical application
In: Journal of applied statistics, 41 (3), 582-595, 2014
[DOI: 10.1080/02664763.2013.845872]

Schmiedt, A. B.
Dickert, Hans Henning
Bleck, Wolfgang
Kamps, U.

[Journal Article]
FE-Simulation of Machining Processes with a New Material Model
In: Journal of materials processing technology, 214 (3), 599-611, 2013
[DOI: 10.1016/j.jmatprotec.2013.10.014]

Buchkremer, Stefan
Wu, Bo
Lung, Dieter
Münstermann, Sebastian
Klocke, Fritz
et al.

[Journal Article]
Micro-macro characterisation and modelling of mechanical properties of gas metal arc welded (GMAW) DP600 steel
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 589, 1-14, 2014
[DOI: 10.1016/j.msea.2013.09.056]

Ramazani, Ali
Mukherjee, Krishnendu
Abdurakhmanov, Aydemir
Prahl, Ulrich
Schleser, Markus
et al.

[Dissertation / PhD Thesis]
Mechanical properties, damage behaviour and retained austenite stability in low alloyed TRIP steels – experimental numerical analyses, 2014

Quade, Hendrik

[Dissertation / PhD Thesis]
Untersuchungen zur Reaktionskinetik und Umsetzung von Reduktionsmitteln im Hochofen und Einschmelzvergaser, 2014

Knepper, Marco

[Dissertation / PhD Thesis]
Numerische Fließkurvenmodellierung von Feinblechstählen unter besonderer Berücksichtigung von Dehnrate, Temperatur und Phasenzusammensetzung, 2014

Dahmen, Kirsten

[Contribution to a book, Contribution to a conference proceedings]
Analyse von rührreibgeschweißten Verbunden aus Tiefziehstahl DC04 und der Aluminiumlegierung AA6016
In: 20. Sächsische Fachtagung Umformtechnik : Tagungsband, Dresden, 27. - 28. November 2013 / Hrsg.: Alexander Brosius, 2013

Mertin, Chris
Mosecker, Linda
Naumov, Andreas
Göttmann, Alexander

[Contribution to a book, Contribution to a conference proceedings]
Effect of austenite stability on fatigue performance of TRIP 700 steel
In: Conference proceedings of the 3rd International Conference of Engineering Against Failure : 26 - 28 June 2013, Kos / Laboratory of Technology and Strength of Materials, University of Patras, Hellas. Conference chairmen: Spiros Pantelakis ..., 2013

Haidemenopoulos, G.
Kermanidis, Alexis T.
Malliaros, Costas
Dickert, Hans Henning
Kucharczyk, Pawel
et al.

[Contribution to a book, Contribution to a conference proceedings]
Assessment of Fatigue Microcrack Initiation and Growth Capabilities in Structural Steels : An Interdisciplinary Experimental and Numerical Method
In: Conference proceedings of the 3rd International Conference of Engineering Against Failure : 26 - 28 June 2013, Kos / Laboratory of Technology and Strength of Materials, University of Patras, Hellas. Conference chairmen: Spiros Pantelakis ..., 2013

Sharaf, Mohamed
Kucharczyk, Pawel
Ma, Anxin
Vajragupta, Napat
Münstermann, Sebastian
et al.

[Contribution to a conference proceedings]
Numerical investigation of Nb segregation during casting
In: [ThermoCalc User’s Meeting, 05.09.2013-06.09.2013, Aachen, Germany], 2013

Konovalov, S.
Prahl, Ulrich

[Abstract, Contribution to a conference proceedings]
The ICMPE approach : combined process and materials design for new steels
In: Book of abstracts / THERMEC' 2013 : Rio Hotel, Las Vegas, USA ; December 2-6, 2013 ; International Conference on Processing & Manufacturing of Advanced Materials (Processing, Fabrication, Properties, Application), 2013

Bleck, Wolfgang
Prahl, Ulrich

[Contribution to a conference proceedings]
ICMPE for Precipitation Design in Engineering Steels
In: [MPIE Workshop 'Alloy Design of Advanced Metallic Materials', MPIE, 13.02.2013-13.02.2013, Düsseldorf, Germany], 2013

Prahl, Ulrich
Konovalov, S.

[Contribution to a conference proceedings]
Tayloring the microstructure for microalloyed carburizing steels by an ICME approach
In: [2nd Int. Symposium on Mo and Nb Alloying in High Performance Steels - Metallurgy for More Sustainable Steels, 25.04.2013-26.04.2013, Jeju Island, South Korea], 2013

Konovalov, S.
Prahl, Ulrich

[Book, Report]
New blast furnace process (ULCOS) ; final report, 2013
[DOI: 10.2777/28645]

Hirsch, A.
Korthas, B.
Hülstrung, J.
Grant, M.
Berthelemot, A.
et al.

[Journal Article]
Numerical and Experimental Study of Alternative Reductant Injection into the Raceway of the Blast Furnace
In: Berg- und hüttenmännische Monatshefte, 158 (11), 453-454, 2013
[DOI: 10.1007/s00501-013-0191-3]

Maier, C.
Jordan, C.
Knepper, M.
Babich, A.
Senk, D.
et al.

[Patent]
Method for operating a shaft furnace, and shaft furnace operable by that method, 2013

Babich, Alexander
Gudenau, Heinrich Wilhelm
Heldt, Hans-Heinrich
König, Gerd
König, Wolfram
et al.

[Contribution to a conference proceedings]
Influence of Microstructural Features on the Propagation of Microstructurally Short Fatigue Cracks in Structural Steels
In: Fatigue of materials II : advances and emergences in understanding ; proceedings of a symposium sponsored by Mechanical Behavior Committee of the Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2012 (MS&T '12), October 7 - 11, 2012 in Pittsburgh, Pennsylvania / ed. by T.S. Srivatsan ..., 2013
[DOI: 10.1002/9781118533383.ch18]

Sharaf, M.
Lian, J.
Vajragupta, N.
Münstermann, S.
Bleck, W.
et al.

[Contribution to a book]
Strip casting and ingot casting: comparison of different cooling conditions regarding the as-cast quality
In: 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012 : [21 - 25 July 2012; proceedings] / [ed. Gavriel Salvendy ...] ; [6]. Advances in ergonomics in manufacturing / ed. by Stefan Trzcielinski and Waldemar Karwowski , 2012

Daamen, Markus
von Schweinichen, Petrico
Richter, Silvia
Hirt, Gerhard
Senk, Dieter

[Dissertation / PhD Thesis]
Hochofenbetrieb mit periodischer Sauerstoffinjektion, 2013

Klock, Rainer

[Contribution to a conference proceedings]
EcoForge : Resource-efficient process chains for high-performance components
In: New developments in forging technology : [papers of the International Conference on 'New Developments in Forging Technology' in Fellbach (near Stuttgart) - Germany, on June, 4th and 5th, 2013] / IFU, Institute for Metal Forming Technology of the University Stuttgart ... Ed. by Mathias Liewald. [In cooperation with: Forschungsgesellschaft Umformtechnik mbh (FGU, Stuttgart/Germany) ...], 2013

Liewald, M.
Hajyheydari, E.
Felde, A.
Fritsching, U.
Hinrichs, B.
et al.

[Contribution to a conference proceedings]
EcoForge – Ressourceneffiziente Prozessketten für Hochleistungsbauteile Ein Leittechnologieprojekt der AIF - Stand und Perspektiven
In: New developments in forging technology : [papers of the International Conference on 'New Developments in Forging Technology' in Fellbach (near Stuttgart) - Germany, on June, 4th and 5th, 2013] / IFU, Institute for Metal Forming Technology of the University Stuttgart ... Ed. by Mathias Liewald. [In cooperation with: Forschungsgesellschaft Umformtechnik mbh (FGU, Stuttgart/Germany) ...], 2013

Liewald, M.
Hajyheydari, E.
Felde, A.
Fritsching, U.
Hinrichs, B.
et al.

[Book]
Validierung und Erweiterung von Berechnungsmethoden für die Blechumformung, Betriebsfestigkeits- und Crashauslegung im Fahrzeugbau mit Stahl / Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, 2013

Bork, Claus-Peter
Reichert, Birgit
Wagener, Rainer
Dahmen, Kirsten
Masendorf, Rainer
et al.

[Contribution to a conference proceedings]
Microstructure development in hot-rolled advanced high strength steels
In: Rolling 2013 : 9th International Rolling Conference & 6th European Rolling Conference ; Venice (Italy), June 10 - 12, 2013 ; proceedings / organized by AIM, Associazione Italiana di Metallurgia, 2013

Bleck, Wolfgang
Prahl, Ulrich
Suwanpinij, Piyada

[Contribution to a conference proceedings, Website]
Multiscale U-O forming simulation of a ferrite/pearlite pipeline tube with effective anisotropic flow curves, 2013

Laschet, Gottfried
Henke, Thomas
Shukla, Mohit
Fayek, Patrick
Prahl, Ulrich
et al.

[Contribution to a conference proceedings]
Continuous Casting : Continuous Development
In: e-Proceeding of Science and Technology of Ironmaking & Steelmaking : (STIS 2013) ; December 16 - 18, 2013 / jointly organized by CSIR - NML, Tata Steel, IIM Metallurgy Materials Engineering, Jamshedpur Chapter, 2013

Senk, Dieter

[Contribution to a book]
Coal use in iron and steel metallurgy
In: The coal handbook : towards cleaner production / ed. by Dave Osborne. - Vol. 2: Coal utilisation, 2013
[DOI: 10.1533/9781782421177.3.267]

Babich, Alexander
Senk, Dieter

[Contribution to a book]
Future directions toward more efficient and cleaner use of coal
In: The coal handbook : towards cleaner production / ed. by Dave Osborne. - Vol. 2: Coal utilisation, 2013
[DOI: 10.1533/9781782421177.3.497]

Osborne, D. G.
Sharples, M.
Lien, L.
Schumacher, G.
Babich, Alexander
et al.

[Book]
Eisenmetallurgie : Eisenrefuktion und Schachtöfen, 2013

Senk, Dieter
Babich, Alexander

[Contribution to a conference proceedings]
A Complete Damage Model Associated with Localized and Diffuse Necking for AHSS Sheet
In: Modelling of process chains and interfaces for sheet metal forming : 6th Forming Technology Forum ; September 19th - 20th, 2013, Herrsching, Germany / conference chairman: W. Volk. UTG, Lehrstuhl für Umwelttechnik und Gießereiwesen ..., 2013

Lian, Junhe
Sharaf, Mohamed
Kucharczyk, Pawel
Münstermann, Sebastian

[Contribution to a conference proceedings]
Simulation des Außenlängsdrehens von Stahl mit einem gekoppelten Schädigungsmodell
In: Bruchmechanische Werkstoff- und Bauteilbewertung : Beanspruchungsanalyse, Prüfmethoden und Anwendungen ; 45. Tagung des DVM-Arbeitskreises Bruchvorgänge, 19. + 20. Februar 2013, Berlin / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann: Peter Hübner, 2013

Wu, Bo
Münstermann, Sebastian
Buchkremer, S.
Bleck, Wolfgang
Lung, D.
et al.

[Contribution to a conference proceedings]
Untersuchung des Einflusses verschiedener Randbedingungen auf das Schädigungsverhalten eines Pipelinestahls durch Simulation eines Battelle Drop weight Tear Tests
In: Bruchmechanische Werkstoff- und Bauteilbewertung : Beanspruchungsanalyse, Prüfmethoden und Anwendungen ; 45. Tagung des DVM-Arbeitskreises Bruchvorgänge, 19. + 20. Februar 2013, Berlin / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann: Peter Hübner, 2013

Döbereiner, Benedikt
Münstermann, Sebastian
Thibaux, Philippe

[Contribution to a conference proceedings]
Investigation on new steel grades for constructions of wind energy mills for sustainable energy supply
In: Society and Materials 7th International Conference : SAM-7 ; 25-26 April 2013, RWTH Aachen University, Aachen, Germany, 2013

Golisch, Georg
Münstermann, Sebastian
Bleck, Wolfgang
Ufer, S.
Reisgen, Uwe
et al.

[Contribution to a conference proceedings]
Contribution to life cycle assessment of high manganese steels
In: Society and Materials 7th International Conference : SAM-7 ; 25-26 April 2013, RWTH Aachen University, Aachen, Germany, 2013

Peymandar, Mohammad
Senk, Dieter

[Contribution to a conference proceedings]
Improving the efficiency of biomass resources: Torrefied biomass for reduction purposes
In: Society and Materials 7th International Conference : SAM-7 ; 25-26 April 2013, RWTH Aachen University, Aachen, Germany, 2013

Arnsfeld, Sonja
Babich, Alexander
Senk, Dieter
Gudenau, Heinrich Wilhelm

[Contribution to a conference proceedings]
Analysis of slant fracture in the Battelle drop-weight tear test
In: The 6th International Pipeline Technology Conference : 6-9 October 2013, Ostend, Belgium / org. by Lab. Soete, University of Gent, Belgium, Clarion Technical Conferences, Houston, TX, USA, Tiratsoo Technical, Beaconsfield, UK, 2013

Döbereiner, Benedikt
Münstermann, Sebastian
Thibaux, Philippe

[Report]
Weiterentwicklung von Bewertungskonzepten zum Versagensverhalten ferritischer Stähle im Übergangsbereich : Teilprojekt: Entwicklung eines dehnungsbasierten Kriteriums zur Versagensvorhersage im oberen Übergangsgebiet und in der Hochlage ; Abschlussbericht ; Reaktorsicherheitsforschung - Vorhaben-Nr. 150 1390 A ; September 2013, 2013

Kucharczyk, Pawel
Münstermann, Sebastian

[Contribution to a conference proceedings]
ICME : a mere coupling of models or a discipline on its own?
In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah / sponsored by TMS (the Minerals, Metals & Materials Society). Ed. by Mei Li ..., 2013

Bambach, Markus
Schmitz, Georg J.
Prahl, Ulrich

[Contribution to a conference proceedings]
The influence of grain size distribution on strain hardening behaviour for dual phase steels using statistically informed artificial microstructure model and crystal plasticity
In: Computational Plasticity XII : proceedings of the XII International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAST XII, Barcelona, Spain 3 - 5 September 2013 / Eugenio Oñate; et al., 2013

Vajragupta, Napat
Lian, Junhe
Sharaf, Mohamed
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Towards an Integrative Simulation of Microstructural Response to Case Hardening of Microalloyed Steels
In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah / sponsored by TMS (the Minerals, Metals & Materials Society). Ed. by Mei Li ..., 2013

Fayek, Patrick
Petermann, Thomas
Prahl, Ulrich

[Contribution to a conference proceedings]
ICME – a mere coupling of models or a discipline of its own?
In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah / sponsored by TMS (the Minerals, Metals & Materials Society). Ed. by Mei Li ..., 2013

Bambach, Markus
Schmitz, Georg J.
Prahl, Ulrich

[Contribution to a conference proceedings]
Modelling the Process Chain of Cold Rolled Dual Phase Steel for Automotive Application
In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah / sponsored by TMS (the Minerals, Metals & Materials Society). Ed. by Mei Li ..., 2013

Ramazani, A.
Prahl, U.

[Contribution to a conference proceedings]
Steel–Ab Initio : quantum mechanics guided design of new Fe-based materials
In: Proceedings of the 2nd World Congress on Integrated Computational Materials Engineering (ICME) : TMS ICME - manufacturing, design, materials ; held July 7 - 11, 2013 at Salt Lake Marriott Downtown at City Creek, Salt Lake City, Utah / sponsored by TMS (the Minerals, Metals & Materials Society). Ed. by Mei Li ..., 2013

Prahl, Ulrich
Bleck, Wolfgang
Saeed-Akbari, Alireza

[Contribution to a conference proceedings]
Multiscale Simulation of Ductile Damage of Dual-Phase Steels
In: Towards zero failure production methods by advanced modeling techniques and a process integrated virtual control : conference proceedings, Zurich, Switzerland, June 2 - 5, 2013 / IDDRG Conference 2013. International Deep Drawing Research Group. Ed. Pavel Hora..., 2013

Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Characterization of Cold Formability of High-Strength Steels in Bending Tests
In: Proceedings of the 2nd International Symposium on Automobile Steel : [held in Anshan, Liaoning province, China on May 21-24, 2013] / org. by Ansteel Group Corporation, the Chinese Society for Metals, 2013

Münstermann, Sebastian
Lian, Junhe
Bleck, Wolfgang

[Contribution to a book]
Steel and Iron Based Alloys
In: Structural materials and processes in transportation : [based on two symposia organized in the course of the Euromat 2009 Conference held in Glasglow (UK) from 7 September 2009 to 10 September 2009] / ed. by Dirk Lehmus ..., 2013

Ramazani, Ali
Berme, Banu
Prahl, Ulrich

[Abstract, Contribution to a conference proceedings, Journal Article]
TEM Investigation of Deformation Mechanisms in FeMnCrCN TWIP Steel
In: Microscopy and microanalysis, 19 (Suppl. S2), 1736-1737, 2013
[DOI: 10.1017/S1431927613010672]

Wittig, J. E.
Pierce, D. T.
Mosecker, Linda
Saeed-Akbari, Alireza
Beigmohamadi, M.
et al.

[Contribution to a conference proceedings]
Improved Exploitation of High-strength Steels in Pressure Vessel Design by Simulations Based on Damage Mechanics
In: 13th International Conference on Fracture 2013 : (ICF-13) ; Beijing, China, 16 - 21 June 2013 / [Chinese Society of Theoretical and Applied Mechanics]. - Vol. 1-7, 2013

Brinnel, Victoria
Schruff, Christian
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings]
Numerical and Experimental Investigation of Fluid Flow in Large Ingot Uphill Casting Process
In: Conference STEELSIM 2013 proceedings : 5th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; VŠB-Technical University of Ostrava, Czech Republic, EU, 10. -12. September 2013, 2013

Zhang, Xiaohuan
Chen, Zhiye
Senk, Dieter
Liu, Xiaoxue
Maqbool, Shahid

[Contribution to a book]
Investigation on the A-Segregation Channel Instable Development in Large Ingot Casting
In: 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012 : [21 - 25 July 2012; proceedings] / [ed. Gavriel Salvendy ...] ; [6]. Advances in ergonomics in manufacturing / ed. by Stefan Trzcielinski and Waldemar Karwowski, 2012

Chen, Zhiye
Senk, Dieter

[Contribution to a book]
Modelling of Gas Removal in Steel Melts via Vacuum Treatment at the RWTH Aachen, Department of Ferrous Metallurgy
In: 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012 : [21 - 25 July 2012; proceedings] / [ed. Gavriel Salvendy ...] ; [6]. Advances in ergonomics in manufacturing / ed. by Stefan Trzcielinski and Waldemar Karwowski, 2012

Christmann, Kevin
Senk, Dieter

[Contribution to a book]
Quantitative Water-Modeling of Ingot Solidification by Using NH4Cl Solution
In: 4th International Conference on Applied Human Factors and Ergonomics (AHFE) 2012 : [21 - 25 July 2012; proceedings] / [ed. Gavriel Salvendy ...] ; [6]. Advances in ergonomics in manufacturing / ed. by Stefan Trzcielinski and Waldemar Karwowski, 2012

Chen, Zhiye
Senk, Dieter
Firsbach, F.

[Contribution to a conference proceedings]
Computer Algebraic Online Simulation Model of the Flux Film in Continuous Casting Moulds
In: Conference STEELSIM 2013 proceedings : 5th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; VŠB-Technical University of Ostrava, Czech Republic, EU, 10. -12. September 2013, 2013

Wosch, Erwin A. T.
Senk, Dieter
Hilgenhöner, Enno H.

[Journal Article]
Biomass use in the steel industry : back to the future?
In: Stahl und Eisen, 133 (5), 57-67, 2013

Babich, Alexander
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Quantitative Water-Modeling of Ingot Solidification by Using NH4Cl Solution
In: Conference STEELSIM 2013 proceedings : 5th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; VŠB-Technical University of Ostrava, Czech Republic, EU, 10. -12. September 2013, 2013

Chen, Zhiye
Senk, Dieter
Firsbach, Felix

[Contribution to a book, Contribution to a conference proceedings]
Modelling of Gas Removal in Steel Melts via Vacuum Treatment at the RWTH Aachen, Department of Ferrous Metallurgy
In: Conference STEELSIM 2013 proceedings : 5th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; VŠB-Technical University of Ostrava, Czech Republic, EU, 10. -12. September 2013, 2013

Christmann, Kevin
Senk, Dieter

[Contribution to a book, Contribution to a conference proceedings]
Investigation on the A-Segregation Channel Instable Development in Large Ingot Casting
In: Conference STEELSIM 2013 proceedings : 5th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking ; VŠB-Technical University of Ostrava, Czech Republic, EU, 10. -12. September 2013, 2013

Chen, Zhiye
Senk, Dieter

[Contribution to a conference proceedings]
Microalloyed Engineering Steels
In: Proceedings of the Fifth Baosteel Biennial Academic Conference : Meeting Steel's New Challenges ; Baosteel BAC 2013 ; [June 04 - 06, 2013, Shanghai] ; ed. by Lejiang Xu, 2013

Bleck, Wolfgang
Konovalov, Sergey
Prahl, Ulrich

[Contribution to a book, Contribution to a conference proceedings]
Development of Sol-Gel Coatings for an Increased Oxidation Resistance of High-Strength Steel Alloys during the Press-Hardening Process
In: Proceedings / 4th International Conference Hot Sheet Metal Forming of High Performance Steel : June 9 - 12, 2013, Luleå, Sweden / CHS 2. [Ed. by Mats Oldenburg ... Luleå University of Technology], 2013

Benfer, Sigrid
Depentori, Francesco
Yekehtaz, Mehdi
Klesen, Christian
Bleck, Wolfgang
et al.

[Report]
Hydrogen embrittlement and delayed fracture of advanced multiphase high-strength steels (Charge & load), 2013
[DOI: 10.2777/94732]

Duprez, L.
Guo, Xiaofei
Bleck, Wolfgang
Liu, H.
Roessler, N.
et al.

[Journal Article]
Charakterisierung der Verformungsmechanismen bei hoch Mn-legierten Stählen unter einachsiger Zugbeanspruchung
In: Materials testing, 55 (9), 636-642, 2013
[DOI: 10.3139/120.110481]

Labudde, Thorsten
Ingendahl, Tobias
Wildau, Maria
Saeed-Akbari, Alireza
Hoffmann, Sascha
et al.

[Journal Article]
Nanopartikel-basierte Schutzschichten für den temporären Oxidationsschutz
In: Galvanotechnik : älteste Fachzeitschrift für die Praxis der Oberflächentechnik, 104 (12), 2388-2403, 2013

Benfer, S.
Yekehtaz, M.
Fürbeth, Wolfram
Klesen, Christian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Gleitbruchmodellierung bei hohen Dehnraten
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis / Tagung Werkstoffprüfung 2012, 06. bis 07. Dezember 2012 in Bad Neuenahr. Hrsg. von Michael Borsutzki ..., 2013

Münstermann, Sebastian
Döbereiner, Benedikt
Kucharczyk, Pawel

[Contribution to a conference proceedings]
Einfluss des Stempelkonzeptes auf die Aufnahme von Warmfließkurven im Umformdilatometer und deren physikalische Interpretation
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis / Tagung Werkstoffprüfung 2012, 06. bis 07. Dezember 2012 in Bad Neuenahr. Hrsg. von Michael Borsutzki ..., 2013

Schacht, Konstantin
Hermann, Klaus
Prahl, Ulrich

[Contribution to a conference proceedings]
Charakterisierung von Oberflächendefekten in Abhängigkeit der plastischen Verformung bei hoch Mn-haltigen TWIP Stählen mittels konfokaler Mikroskopie im Zugversuch
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis / Tagung Werkstoffprüfung 2012, 06. bis 07. Dezember 2012 in Bad Neuenahr. Hrsg. von Michael Borsutzki ..., 2013

Ingendahl, Tobias
Wesselmecking, S.
Bleck, Wolfgang

[Journal Article]
Entwicklung von schadenstoleranten hochfesten Stählen
In: Lightweight design, 6 (6), 18-23, 2013
[DOI: 10.1365/s35725-013-0297-2]

Bambach, Margarita
Bleck, Wolfgang

[Journal Article]
An assessment on coatability of transformation induced plasticity (TRIP)-aided steel
In: Surface & coatings technology, 235, 226-234, 2013
[DOI: 10.1016/j.surfcoat.2013.07.037]

Bhattacharyya, Tanmay
Singh, Shiv Brat
Bhattacharyya, Sandip
Ray, Ranjit Kumar
Bleck, Wolfgang
et al.

[Contribution to a conference proceedings]
Voraussetzungen für die sichere Anwendung dehnungsbasierter Schädigungskriterien in der Druckbehälterauslegung
In: Bruchmechanische Werkstoff- und Bauteilbewertung : Beanspruchungsanalyse, Prüfmethoden und Anwendungen ; 45. Tagung des DVM-Arbeitskreises Bruchvorgänge, 19. + 20. Februar 2013, Berlin / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann: Peter Hübner, 2013

Brinnel, Victoria
Schaffrath, Simon
Münstermann, Sebastian
Schäfer, Dirk
Feldmann, Markus
et al.

[Contribution to a conference proceedings]
Investigation of safety requirement on electron beam welded steel constructions
In: Conference proceedings of the 3rd International Conference of Engineering Against Failure : 26 - 28 June 2013, Kos / Laboratory of Technology and Strength of Materials, University of Patras, Hellas. Conference chairmen: Spiros Pantelakis ..., 2013

Golisch, Georg
Ufer, Sebastian
Langenberg, Peter
Münstermann, Sebastian
Bleck, Wolfgang
et al.

[Journal Article]
Reduction Behavior of Iron Ore Pellets with Simulated Coke Oven Gas and Natural Gas
In: Steel research international, 84 (11), 1085-1097, 2013
[DOI: 10.1002/srin.201200333]

Mousa, Elsayed
Babich, Alexander
Senk, Dieter

[Journal Article]
Atomic-scale investigation of ε and θ precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations
In: Acta materialia, 61 (20), 7582-7590, 2013
[DOI: 10.1016/j.actamat.2013.08.051]

Song, Weuwen
von Appen, Jörg
Choi, Pyuck-Pa
Dronskowski, Richard
Raabe, Dierk
et al.

[Journal Article]
Hot shortness behavior of a copper-alloyed high strength interstitial free steel
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 588, 288-298, 2013
[DOI: 10.1016/j.msea.2013.09.041]

Rana, R.
Bleck, W.
Singh, S. B.
Mohanty, O. N.

[Dissertation / PhD Thesis]
Reduktion von Ilmenit im Labor-Drehrohrofen mit Kohle als Reduktionsmittel, 2013

Formanek, Lothar

[Dissertation / PhD Thesis]
Microstructure based failure model of DP steels, 2013

Ramazani, Ali

[Contribution to a conference proceedings]
Compressive behavior of lattice structures in solid shells manufactured by SLM
In: 14th NOLAMP Conference : The 14th Nordic Laser Materials Processing Conference ; Gothenburg, Sweden, August 26th - 28th, 2013 / Ed.: Alexander Kaplan ; Hans Engström, 2013

Merkt, Simon
Hinke, Christian
Dalaee, Mohammad
Salminen, Antti
Purtonen, Tuomas
et al.

[Journal Article]
Effect of Different Casting Parameters on the Cleanliness of High Manganese Steel Ingots Compared to High Carbon Steel
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 44 (12), 5416-5423, 2013
[DOI: 10.1007/s11661-013-1949-7]

von Schweinichen, Petrico
Chen, Zhiye
Senk, Dieter
Lob, Alexander

[Journal Article]
Hot Deformation Behavior and Microstructural Evolution of a Nickel-Free Austenitic Steel with High Nitrogen Content
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 44 (12), 5549-5555, 2013
[DOI: 10.1007/s11661-013-1893-6]

Erisir, Ersoy
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Journal Article]
Characterisation of microstructure and modelling of flow behaviour of bainite-aided dual-phase steel
In: Computational materials science, 80, 134-141, 2013
[DOI: 10.1016/j.commatsci.2013.05.017]

Ramazani, Ali
Pinard, Philippe T.
Richter, Silvia
Schwedt, Alexander
Prahl, Ulrich

[Journal Article]
Bewertung der Kaltumformbarkeit mehrphasiger Stähle mit Hilfe schädigungsmechanischer Ansätze
In: Materials testing, 55 (9), 628-635, 2013

Münstermann, Sebastian
Lian, Junhe
Vajragupta, Napat

[Journal Article]
Enhancement of Iron Ore Sinter Reducibility through Coke Oven Gas Injection into the Modern Blast Furnace
In: ISIJ international, 53 (8), 1372-1380, 2013
[DOI: 10.2355/isijinternational.53.1372]

Mousa, Elsayed
Babich, Alexander
Senk, Dieter

[Dissertation / PhD Thesis]
Ressourceneffizienter Einsatz hochfester Stähle durch schädigungsmechanische Bemessung unbefeuerter Druckbehälter, 2013

Schruff, Christian

[Journal Article]
Characterization of Dual-Phase Steel Microstructure by Combined Submicrometer EBSD and EPMA Carbon Measurements
In: Microscopy and microanalysis, 19 (4), 996-1006, 2013
[DOI: 10.1017/S1431927613001554]

Pinard, Philippe T.
Schwedt, Alexander
Ramazani, Ali
Prahl, Ulrich
Richter, Silvia

[Journal Article]
Predicting lower bound damage curves for high-strength low-alloy steels
In: Fatigue & fracture of engineering materials & structures, 36 (8), 779-794, 2013
[DOI: 10.1111/ffe.12046]

Münstermann, S.
Schruff, C.
Lian, J.
Döbereiner, B.
Brinnel, V.
et al.

[Dissertation / PhD Thesis]
Charakterisierung der Binderstrukturen im Schaumgrünling und Sinterverhalten von hochlegierten SchlickerReaktions-Stahlschäumen, 2013

Schulze, Sebastian Leif

[Journal Article]
Nitrogen in chromium-manganese stainless steels : a review on the evaluation of stacking fault energy by computational thermodynamics
In: Science and technology of advanced materials : STAM, 14 (3), 033001, 2013
[DOI: 10.1088/1468-6996/14/3/033001]

Mosecker, Linda
Saeed-Akbari, Alireza

[Journal Article]
Characterization and modelling of failure initiation in DP steel
In: Computational materials science, 75, 35-44, 2013
[DOI: 10.1016/j.commatsci.2013.04.001]

Ramazani, Ali
Schwedt, Alexander
Aretz, Anke
Prahl, Ulrich
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Praxisnahe Entwicklung eines dynamischen LD-Konvertermodells unter besonderer Berücksichtigung betrieblich bedingter Einflussfaktoren und statistischer Modellauswertungen, 2013

Schöne, Dominik

[Journal Article]
Mechanical property and microstructure of resistance spot welded twinning induced plasticity-dual phase steels joint
In: Science and technology of welding and joining, 18 (6), 485-491, 2013
[DOI: 10.1179/1362171813Y.0000000127]

Rajinikanth, V.
Mukherjee, K.
Ghosh Chowdhury, S.
Schiebahn, A.
Harms, A.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Properties of friction stir welded blanks made from DC04 mild steel and aluminium AA6016
In: WGP congress 2013 : progress in production engineering ; Selected, peer reviewed papers from the 2013 WGP Congress ; July 22-23, 2013, Erlangen, Germany / ed. by Marion Merklein, Jörg Franke and Hinnerk Hagenah, 2013
[DOI: 10.4028/www.scientific.net/AMR.769.237]

Göttmann, Alexander
Mertin, Chris
Mosecker, Linda
Naumov, Andreas
Bambach, Markus

[Preprint]
Optimal control of a cooling line for production of hot rolled dual phase steel, 2013

Bleck, Wolfgang
Hömberg, Dietmar
Prahl, Ulrich
Suwanpinij, Piyada
Togobytska, Nataliya

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Micromechanical Modeling of Damage and Failure in Dual Phase Steels
In: Key engineering materials, 554/557, 2369-2374, 2013
[DOI: 10.4028/www.scientific.net/KEM.554-557.2369]

Lian, Junhe
Vajragupta, Napat
Münstermann, Sebastian

[Journal Article]
Observation and analysis of abnormal absorption signals in laser flash photolysis measurement
In: Spectrochimica acta / A, Molecular and biomolecular spectroscopy, 105, 569-576, 2013
[DOI: 10.1016/j.saa.2012.12.056]

Li, Wen
Yuan, Yao-feng
Li, Xiao-lin
Su, Xiao-long
Sun, Wen-hua

[Journal Article]
Eine numerische Studie der mechanischen Eigenschaften und des Verarbeitungsverhaltens von hochfesten Stahl-Kompositwerkstoffen
In: MP materials testing : Materialprüfung, 55 (5), 336-344, 2013

Münstermann, Sebastian
Vajragupta, Napat
Weisgerber, Bernadette
Kern, Andreas

[Dissertation / PhD Thesis]
Einstellung, Charakterisierung und Eigenschaften von bainitischen Mikrostrukturen in Schmiedestählen mit mittlerem Kohlenstoffgehalt, 2013

Keul, Christoph Alexander

[Journal Article]
Phase-Field Modeling of Eutectic Growth in a Ti-Fe System with Multiple Nuclei and Misorientations
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 44A (4), 1925-1936, 2013
[DOI: 10.1007/s11661-012-1548-z]

Ebrahimi, Zohreh
Rezende, João Luiz Lopes
Emmerich, H.

[Journal Article]
Effect of Pre-Treatment on Copper Precipitation Characteristics in a Copper-Alloyed Interstitial Free Steel Studied by Thermoelectric Power Measurement
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 44A (1), 186-200, 2013
[DOI: 10.1007/s11661-012-1386-z]

Rana, Radhakanta
Massardier, Véronique
Singh, ShivBrat
Mohanty, Omkar Nath

[Journal Article]
Isothermal versus non-isothermal hot compression process: A comparative study on phase transformations and structure-property relationships
In: Materials and design, 45, 1-5, 2013
[DOI: 10.1016/j.matdes.2012.08.062]

Abbasi, M.
Naderi, M.
Saeed-Akbari, A.

[Journal Article]
Different biokinetics of nanomedicines linking to their toxicity; an overview
In: DARU : Journal of Faculty of Pharmacy Tehran University of Medicine, 21, 14, 2013
[DOI: 10.1186/2008-2231-21-14]

Mostafalou, Sara
Mohammadi, Hamidreza
Ramazani, Ali
Abdollahi, Mohammad

[Contribution to a conference proceedings]
Zähigkeitsuntersuchungen EB-geschweißter Gründungsstrukturen von Offshore-Windenergieanlagen
In: Vorträge der 9. Internationalen Konferenz Strahltechnik : 24. - 25. April 2013, Halle (Saale), Germany = Proceedings of the 9th International Conference Beam Technology / Veranst.: Schweißtechnische Lehr- und Versuchsanstalt Halle; Deutscher Verband für Schweißen und verwandte Verfahren; IIW, 2013

Reisgen, Uwe
Olschok, Simon
Ufer, Sebastian
Bleck, Wolfgang
Münstermann, Sebastian
et al.

[Contribution to a book]
Anwendung des Failure Assessment Diagram (FAD) auf EB-Schweissungen für eine Anwendung im Windenergieanlagenbau / Institut für Schweißtechnik und Fügetechnik der RWTH Aachen University
In: ISF, Welding and Joining Institute, RWTH Aachen University, 2013

Ufer, Sebastian
Bleck, Wolfgang
Münstermann, Sebastian
Golisch, Georg

[Contribution to a conference proceedings]
Investigations of the reaction kinetics of torrefied biomass for metallurgical applications
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 3, 2013

Arnsfeld, Sonja
Rodriguez Correa, Catalina
Choi, Su-Min
Babich, Alexander
Senk, Dieter
et al.

[Contribution to a conference proceedings]
Investigations on the Injection of DRI/LRI and Char into the Blast Furnace
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 4, 2013

Born, Stefan
Senk, Dieter
Babich, Alexander
Gudenau, Heinrich Wilhelm
Stefan, Tobias

[Contribution to a conference proceedings]
Biomass Use in Ironmaking: Options and Limits
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 3, 2013

Babich, Alexander
Arnsfeld, Sonja
Kowitwarangkul, Pruet
Senk, Dieter

[Contribution to a conference proceedings]
Study on coal and coal briquettes pyrolysis and conversion
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 2, 2013

Knepper, Marco
Babich, Alexander
Senk, Dieter

[Contribution to a conference proceedings]
Waste plastics injection: reaction kinetics and effect on the blast furnace process
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 2, 2013

Knepper, Marco
Babich, Alexander
Senk, Dieter
Buergler, Thomas
Feilmayr, Christoph
et al.

[Contribution to a conference proceedings]
New Technologies and Sustainable Development
In: 6th International Congress on Science and Technology of Ironmaking 2012 (ICSTI) : including proceedings from the 42nd Ironmaking and Raw Materials Seminar, and the 13th Brazilian Symposium on Iron Ore ; Rio de Janeiro, Brazil, 14 - 18 October 2012 / ABM, Associação Brasileira de Metalurgia, Materiais e Mineração. - Vol. 4, 2013

Gudenau, Heinrich Wilhelm
Senk, Dieter

[Journal Article]
Influence of Strain Rate, Temperature, Plastic Strain, and Microstructure on the Strain Rate Sensitivity of Automotive Sheet Steels
In: Steel research international, 84 (5), 426-442, 2012
[DOI: 10.1002/srin.201200099]

Larour, Patrick
Bäumer, Annette
Dahmen, Kirsten
Bleck, Wolfgang

[Journal Article]
Microstructural prediction through artificial neural network (ANN) for development of transformation induced plasticity (TRIP) aided steel
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 565, 148-157, 2013
[DOI: 10.1016/j.msea.2012.11.110]

Bhattacharyya, Tanmay
Singh, Shiv Brat
Sikdar, Swati
Bhattacharyya, Sandip
Bleck, Wolfgang
et al.

[Journal Article]
Enhanced Mechanical Properties of a Hot-stamped Advanced High-Strength Steel via Tempering Treatment
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 44A (4), 1852-1861, 2013
[DOI: 10.1007/s11661-012-1546-1]

Naderi, Malek
Abbasi, Mahmoud
Saeed-Akbari, Alireza

[Contribution to a book, Contribution to a conference proceedings]
Quantification of Phase Transformation Kinetics under Thermomechanical Conditions Using Dilatometry Data
In: Manufacturing science and technology III : selected, peer reviewed papers from the 2012 3rd International Conference on Manufacturing Science and Technology (ICMST 2012), August 18 - 19, 2012, New Delhi, India / ed. by: R. Sivakumar, 2013
[DOI: 10.4028/www.scientific.net/AMR.622-623.581]

Salari, Sina
Naderi, Malek
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
On the effect of austenite stability on high cycle fatigue of TRIP 700 steel
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 573, 7-11, 2013
[DOI: 10.1016/j.msea.2013.02.015]

Haidemenopoulos, Gregory N.
Kermanidis, Alexis T.
Malliaros, Costas
Dickert, Hans Henning
Kucharczyk, Pawel
et al.

[Journal Article]
Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels
In: International journal of plasticity, 43, 128-152, 2013
[DOI: 10.1016/j.ijplas.2012.11.003]

Ramazani, Ali
Mukherjee, Krishnendu
Schwedt, Alexander
Goravanchi, P.
Prahl, Ulrich
et al.

[Contribution to a conference proceedings]
The strategy to consider microstructure features on the formability of AHSS
In: MEFORM 2013 : Simulation von Umformprozessen, 20.-22. März 2013, Altenberg / Hrsg.: Prof. Dr.-Ing. R. Kawalla, 2013

Vajragupta, Napat
Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Simulation, optimization and control of microstructure evolution and mechanical properties during hot rolling of multiphase steels
In: MEFORM 2013 : Simulation von Umformprozessen, 20.-22. März 2013, Altenberg / Hrsg.: Prof. Dr.-Ing. R. Kawalla, 2013

Suwanpinij, Piyada
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a conference proceedings]
Influence of microstructural banding on flow curve and failure in TRIP steels
In: MEFORM 2013 : Simulation von Umformprozessen, 20.-22. März 2013, Altenberg / Hrsg.: Prof. Dr.-Ing. R. Kawalla, 2013

Prahl, Ulrich
Quade, Hendrik
Ramazani, Ali
Bleck, Wolfgang

[Journal Article]
Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
In: Acta materialia, 61 (2), 494-510, 2013
[DOI: 10.1016/j.actamat.2012.09.064]

Steinmetz, David Richard
Jäpel, Tom
Wietbrock, Burkhard
Eisenlohr, Philip
Gutierrez-Urrutia, Ivan
et al.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Characterization of ductile failure behavior of the ferritic steel using damage mechanics modeling approach
In: Key engineering materials, 525-526, 469-472, 2013
[DOI: 10.4028/www.scientific.net/KEM.525-526.469]

Kucharczyk, Pawel
Münstermann, Sebastian

[Journal Article]
A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets
In: International journal of damage mechanics, 22 (2), 189-219, 2013
[DOI: 10.1177/1056789512439319]

Lian, Junhe
Sharaf, Mohamed
Archie, F.
Münstermann, Sebastian

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Modeling of damage and failure of dual phase steel in Nakajima test
In: Key engineering materials, 525-526, 69-72, 2013
[DOI: 10.4028/www.scientific.net/KEM.525-526.69]

Lian, Junhe
Liu, Peng Fei
Münstermann, Sebastian

[Journal Article]
Strain Rate Sensitivity of Pre-Strained AISI 301LN2B Metastable Austenitic Stainless Steel
In: Steel research international, 84 (1), 72-88, 2013
[DOI: 10.1002/srin.201200120]

Larour, Patrick
Verleysen, Patricia
Dahmen, Kirsten
Bleck, Wolfgang

[Journal Article]
Correlation between 2D and 3D flow curve modelling of DP steels using a microstructure-based RVE approach
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 560A, 129-139, 2013
[DOI: 10.1016/j.msea.2012.09.046]

Ramazani, Ali
Mukherjee, Krishnendu
Quade, Hendrik
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a conference proceedings, Journal Article]
Shipping containers in a sustainable city
In: Revue de métallurgie, 110 (1), 55-63, 2013
[DOI: 10.1051/metal/2013049]

Abrasheva, Gergana
Häußling, Roger
Senk, Dieter

[Contribution to a conference proceedings, Journal Article]
Structural requirements and material solutions for sustainable buildings
In: Revue de métallurgie, 110 (1), 37-46, 2013
[DOI: 10.1051/metal/2013053]

Brinnel, Victoria
Münstermann, Sebastian
Bleck, Wolfgang
Feldmann, Markus
Reese, Stefanie

[Contribution to a conference proceedings]
Entwicklung und Umformung von schädigungstoleranten hochfesten Stählen
In: Vom Werkstoff zum Produkt : 28. ASK Aachener Stahlkolloquium - Umformtechnik: Stahl und NE-Metalle ; 7./8. März 2013, Eurogress Aachen ; Tagungsband ; [Vorträge des 28. ASK Umformtechnik] / Institut für Bildsame Formgebung; Institut für Eisenhüttenkunde, RWTH Aachen University. [Gerhard Hirt (Hrsg.)], 2013

Bleck, Wolfgang

[Dissertation / PhD Thesis]
Influence of carbide morphology and composition on the high temperature mechanical properties of high alloy steel grades, 2013

Shash, Ahmed Yehia Mohamed

[Book]
Weiterentwicklung eines optimierten korrosionsgeschützten Systems für niedrig legierten Baustahl mit einer thermisch gespritzten Schutzschicht auf Basis modifizierter Zinklegierungen als Ergänzung zum Stückverzinken von Bauteilen, 2013

Bobzin, Kirsten
Schulz, Christiane
Bleck, Wolfgang
Ingendahl, Tobias
Feldmann, Markus
et al.

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Deformation Mechanisms of Ti6Al4V Sheet Material during the Incremental Sheet Forming with Laser Heating
In: Key engineering materials, 549, 372-380, 2013
[DOI: 10.4028/www.scientific.net/KEM.549.372]

Mosecker, Linda
Göttmann, Alexander
Saeed-Akbari, Alireza
Bleck, Wolfgang
Bambach, Markus
et al.

[Journal Article]
Derivation of anisotropic flow curves of ferrite–pearlite pipeline steel via a two-level homogenisation scheme
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 566, 143-156, 2013
[DOI: 10.1016/j.msea.2012.12.064]

Laschet, Gottfried
Fayek, Patrick
Henke, Thomas
Quade, Hendrik
Prahl, Ulrich

[Journal Article]
Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
In: Computational materials science, 68, 107-116, 2013
[DOI: 10.1016/j.commatsci.2012.09.009]

Ramazani, Ali
Li, Yang
Mukherjee, Krishnendu
Prahl, Ulrich
Bleck, Wolfgang
et al.

[Book]
Materials science of steel. Textbook for RWTH Aachen University Students ; translated from the German version by Susan Giffin, 2013

Bleck, Wolfgang

[Dissertation / PhD Thesis]
Inhibition of coking and metal dusting on conventional alloys by using a nickel-tin intermetallic coating, 2013

Geers, Christine

[Dissertation / PhD Thesis]
Strengthening of steels by ceramic phases, 2013

Feng, Yujie

[Dissertation / PhD Thesis]
Relation between microstructure and mechanical properties of a low-alloyed TRIP steel, 2013

Davut, Kemal

[Dissertation / PhD Thesis]
Mikrostrukturelle Beschreibung von Verformung und Schädigung hochmanganhaltiger Stähle mit TRIP- und TWIP-Effekt, 2013

Twardowski, Raphael

[Dissertation / PhD Thesis]
Prediction of springback for ultra high strength steel sheets, 2013

Ma, Ning

[Dissertation / PhD Thesis]
Beschleunigte Entkohlung von Stahlschmelzen im Vakuum durch Kombination von Sauerstoff und Metalloxiden, 2013

Rzehak, Dominik

[Dissertation / PhD Thesis]
Einfluss von Ausscheidungen auf das Duktilitätsverhalten einzelner Erstarrungsgefüge während der Drahtwalzung am Beispiel von Automatenstahl, 2013

Leuschke, Uwe

[Journal Article]
Phase-field modelling of microstructure evolution during processing of cold-rolled dual phase steels
In: Integrating materials and manufacturing innovation, 1 (1), 1 - 13, 2012
[DOI: 10.1186/2193-9772-1-3]

Rudnizki, Jenny
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings]
’Quenching and Partitioning’ - An In Situ Approach to Characterize the Process Kinetics and the Final Microstructure of TRIP-Assisted Steel
In: THERMEC 2011 supplement : supplement to THERMEC 2011 ; proceedings of the 7th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2011 which was held during August 1 - 5, 2011 in Quebec City, Canada / ed. by T. Chandra ..., 2011
[DOI: 10.4028/www.scientific.net/AMR.409.713]

Rieger, Thomas
Herrmann, Klaus
Carmele, Dagmar
Meyer, Stephan
Lippmann, Thomas
et al.

[Contribution to a conference proceedings]
Effect of Pre-strain and Surface Roughness on the Formation of Self-ordered TiO2 Nanotube Arrays on 2-phase Ti6Al4V Substrate
In: [Junior Euromat 2012, 23.07.2012-27.07.2012, Lausanne, Switzerland], 2012

Bleck, Wolfgang

[Contribution to a conference proceedings]
Example of ICME : Integrative Material and Process Design of Nb alloyed gear steel for high temperature carburising
In: [Indo-German Workshop on Integrated Computational Materials Engineering, 27.11.2012-30.11.2012, Pune, India], 2012

Prahl, Ulrich

[Contribution to a book]
Test case line pipe
In: Integrative Computational Materials Engineering : Concepts and Applications of a Modular Simulation Platform / ed. by Georg J. Schmitz and Ulrich Prahl, 2012

Fayek, Patrick
Quade, Hendrik
Henke, Thomas
Laschet, Gottfried
Apel, Markus
et al.

[Contribution to a book]
Analysis of friction stir welded blanks made from DC04 mild steel and aluminium AA6016
In: Integrative production technology for high-wage countries / Christian Brecher, ed., 2012

Mertin, Chris
Mosecker, Linda
Naumov, Andreas

[Dissertation / PhD Thesis]
Beitrag zum endabmessungsnahen Gießen : Analyse eines Stranggießprozesses für Dünnbrammen mit Parallelogrammquerschnitt, 2012

Nagy, Richard Csongor

[Journal Article]
Mapping the Global Flow of Steel: From Steelmaking to End-Use Goods
In: Environmental science & technology, 46 (24), 13048-13055, 2012
[DOI: 10.1021/es302433p]

Cullen, Jonathan M.
Allwood, Julian M.
Bambach, Margarita

[Contribution to a conference proceedings]
Foamability of high manganese steelmaking slags for an electric arc furnace
In: 10th European Electric Steelmaking Conference : EEC 2012 ; Congress Graz, Austria, 25.-28.09.2012 ; conference papers / Asmet, The Austrian Society For Metallurgy And Materials, 2012

Peymandar, Mohammad
Senk, Dieter

[Contribution to a conference proceedings]
Visualization of the Flux Film Thickness in Continuous Casting Moulds and Examples of Applications in Practice
In: 5th International Congress on the Science and Technology of Steelmaking : 1-3 October, 2012, Dresden, Germany ; proceedings, 2012

Wosch, Erwin A. T.
Hilgenhöner, Enno H.
Senk, Dieter

[Contribution to a conference proceedings]
Comparison of as-cast structure of ingots of different steel grades with regard to effects of casting parameters
In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, 2012

Chen, Zhiye
von Schweinichen, Petrico
Senk, Dieter
Lob, Alexander

[Contribution to a conference proceedings]
Injection of DRI/LRI into the blast furnace
In: SCANMET IV : 4th International Conference on Process Development in Iron and Steelmaking; 10 - 13 June 2012, Luleå, Sweden, Nordkalotten Hotel & Konferens / organised by swerea MEFOS. - Vol. 2, 2012

Born, Stefan
Babich, Alexander
Senk, Dieter
Gudenau, Heinrich Wilhelm
Stefan, Tobias

[Contribution to a conference proceedings]
Effects of carbon crystallinity and ash in charcoal on carburization reaction
In: SCANMET IV : 4th International Conference on Process Development in Iron and Steelmaking; 10 - 13 June 2012, Luleå, Sweden, Nordkalotten Hotel & Konferens / organised by swerea MEFOS. - Vol. 1, 2012

Ohno, Ko-ichiro
Babich, Alexander
Senk, Dieter
Gudenau, Heinrich Wilhelm
Shimizu, Masakata

[Contribution to a conference proceedings]
The effect of the solid-liquid interface energy on the dendrite growth morphology for high manganese steels
In: 5th International Congress on the Science and Technology of Steelmaking : 1-3 October, 2012, Dresden, Germany ; proceedings, 2012

Rezende, João Luiz Lopes
Hüttenmeister, Dennis
Senk, Dieter

[Contribution to a conference proceedings]
Stahl und Schlacke – ein Bund fürs Leben
In: Schlacken aus der Metallurgie / Michael Heußen; Heribert Motz [Hrsg.]. - Band 2: Ressourceneffizienz und Stand der Technik : [2. Symposium Schlacken aus der Metallurgie ; Meitingen, Oktober 2012], 2012

Senk, Dieter
Hüttenmeister, Dennis

[Contribution to a conference proceedings]
Modules of the Rapid Ingot Modeling System (RaIn Model)
In: Proceedings - ICRF 2012, 1st International Conference on Ingot Casting, Rolling and Forging : 3 - 7 June 2012, Aachen, Germany, Eurogress, 2012

Senk, Dieter
von Schweinichen, Petrico
Chen, Zhiye
Lob, Alexander

[Contribution to a conference proceedings]
Characterisation of pyrolysed biomass as an alternative option to pulverised coal injection into the blast furnace
In: SCANMET IV : 4th International Conference on Process Development in Iron and Steelmaking; 10 - 13 June 2012, Luleå, Sweden, Nordkalotten Hotel & Konferens / organised by swerea MEFOS. - Vol. 1, 2012

Arnsfeld, Sonja
Babich, Alexander
Senk, Dieter

[Journal Article]
Modelling the thermal conditions in the continuous-casting secondary cooling zone by computer algebra
In: Steel grips, 10, 34-39, 2012

Wosch, Erwin A. T.

[Journal Article]
From computer algebra to flux film visualization in continuous casting moulds
In: Steel grips, 10, 11-14, 2012

Wosch, Erwin A. T.

[Contribution to a book]
Virtual Production Systems
In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 2012
[DOI: 10.1007/978-3-642-21067-9_4]

Schulz, Wolfgang
Bischof, Christian
Bobzin, Kirsten
Brecher, Christian
Gries, Thomas
et al.

[Contribution to a book]
Hybrid Production Systems
In: Integrative production technology for high-wage countries / Christian Brecher, ed., 2012

Hirt, Gerhard
Bleck, Wolfgang
Bobzin, Kirsten
Brecher, Christian
Bührig-Polaczek, Andreas
et al.

[Contribution to a book]
Individualised Production
In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 2012
[DOI: 10.1007/978-3-642-21067-9_3]

Schuh, Günther
Behr, Marek
Brecher, Christian
Bührig-Polaczek, Andreas
Michaeli, Walter
et al.

[Contribution to a conference proceedings]
Potenziale der schädigungsmechanischen Modellierung – wirtschaftliche Sicherheitsnachweise für Bauteile aus Eisenguss
In: Die Welt der Gusseisenwerkstoffe : Vielfalt für die Zukunft ; CastTec 2012 ; 1. internationale Fachtagung, Mercure Parkhotel Krefelder Hof, Krefeld, 8. + 9. November 2012 = The world of cast iron materials : diversity for the future ; 1st international conference, 2012

Münstermann, Sebastian
Döbereiner, Benedikt
Lian, Junhe

[Contribution to a conference proceedings]
Improvement of thermal conductivity of hot-work tool steels by alloy design and heat treatment
In: TOOL 2012 : Proceedings of the 9th International Tooling Conference - Developing the World of Tooling / 4th International Conference on Heat Treatment of Tools and Dies; 11-14 September 2012, Montanuniversität Leoben, Austria / Leitner, Harald and Kranz, Regina and Tremmel, Angelika, 2012

Meurisse, Emeline
Ernst, C.
Bleck, Wolfgang

[Contribution to a conference proceedings]
Influence of microstructural features on the propagation of microstructurally short fatigue cracks in structural steels
In: Materials Science & Technology 2012 Conference & Exhibition : MS & T'12 ; conference proceedings ; October 7 - 11, 2012, Pittsburgh, Pennsylvania, USA ; the leading forum addressing structure, properties, processing and performance across the materials community / The American Ceramic Society ..., 2012

Sharaf, Mohamed
Lian, Junhe
Vajragupta, Napat
Münstermann, Sebastian
Bleck, Wolfgang
et al.

[Contribution to a conference proceedings]
Damage modeling of multiphase steels using microstructure based RVE technique
In: Advanced failure predicition methods in sheet metal forming : 5th Forming Technology Forum 2012 ; June 5th - 6th, 2012, Zurich, Switzerland ; proceedings / IVP, Institut für Virtuelle Produktion, ETH Eidgenössische Technische Hochschule Zürich ..., 2012

Prahl, Ulrich
Ramazani, Ali
Quade, Hendrik
Twardowski, Raphael

[Contribution to a conference proceedings]
Computational simulation and atomic scale investigation of two-step bainitic phase transformation kinetics in high carbon steel 100Cr6
In: Asia Steel International Conference 2012 [Asia Steel 2012]: Beijing, China, Sept. 23-27, 2012 ; proceedings, 2012

Song, Wenwen
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a conference proceedings]
TiC reinforced steel composite for automotive application
In: Asia Steel International Conference 2012 [Asia Steel 2012]: Beijing, China, Sept. 23-27, 2012 ; proceedings, 2012

Feng, Yujie
Hofmann, Harald
Höckling, Christian
Miller, Magnus
Bleck, Wolfgang

[Contribution to a conference proceedings]
Crystal plasticity modeling on single crystal and polycrystal of a ferritic steel sheet
In: Materials Science & Technology 2012 Conference & Exhibition : MS & T'12 ; conference proceedings ; October 7 - 11, 2012, Pittsburgh, Pennsylvania, USA ; the leading forum addressing structure, properties, processing and performance across the materials community / The American Ceramic Society ..., 2012

Lian, Junhe
Gao, Siwen
Sharaf, Mohamed
Vajragupta, Napat
Schmaling, Benjamin
et al.

[Contribution to a conference proceedings]
Corrosion Protection and Sustainability of Thermally Sprayed Zinc Based Coating Systems
In: Safer World Through Better Corrosion Control : Eurocorr 2012 ; the European Corrosion Congress ; Istanbul, 9-13 September 2012 / DECHEMA; .... - Buch + 1 CD-ROM, 2012

Bobzin, Kirsten
Kopp, N.
Warda, T.
Schulz, Christiane
Ingendahl, Tobias
et al.

[Journal Article]
Thermisch gespritzte Korrosionsschutzschichten auf Zink-Basis als Ergänzung zum Stückverzinken von Bauteilen
In: Thermal spray bulletin, 5 (1), 48-55, 2012

Bobzin, Kirsten
Kopp, Nils
Warda, Thomas
Schulz, Christiane
Klesen, Christian
et al.

[Contribution to a conference proceedings]
Pellets mit eingebettetem Kohlenstoff für den Mini-Hochofen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Kowitwarangkul, Pruet
Babich, Alexander
Senk, Dieter

[Contribution to a conference proceedings]
Untersuchung des Reinheitsgrads von 'KTM-legierten' Cr-Stählen und deren Seigerungsverhalten
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Zeichner, Miriam
Senk, Dieter

[Contribution to a conference proceedings]
Modeling of Fluid Flow in Large Ingot Uphill Teeming Process
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Zhang, Xiaohuan
Wosch, Erwin A. T.
Senk, Dieter

[Contribution to a conference proceedings]
Online-Bestimmung des Stahl–Reinheitsgrads mittels Einzelfunkenspektrometrie (PDA-OES) im Rahmen der Pfannenmetallurgie
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Weerts, Hubert
Senk, Dieter

[Contribution to a conference proceedings]
Einfluss unterschiedlicher Feuerfestmaterialien auf die Gussqualität von hochmanganlegierten Stählen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

von Schweinichen, Petrico
Senk, Dieter
Weerts, Hubert

[Contribution to a conference proceedings]
Computeralgebraische Prozessmodellierung des Stranggießens und ihr industrieller Einsatz
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Wosch, Erwin A. T.

[Contribution to a conference proceedings]
Phasenfeldsimulation der Gefügebildung während der Erstarrung hochmanganhaltiger Stähle
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Rezende, João Luiz Lopes
Senk, Dieter

[Contribution to a conference proceedings]
Messung von Grenzflächenenergien an der Phasengrenzfläche fest-flüssig von Fe-Mn-C-Stählen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Hüttenmeister, Dennis
von Schweinichen, Petrico
Senk, Dieter

[Contribution to a conference proceedings]
Behandlung des Einschmelzproblems von hochmanganhaltigen Stählen mit erhöhtem Aluminiumgehalt
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Peymandar, Mohammad
Senk, Dieter

[Contribution to a conference proceedings]
Reaktionskinetik von Reduktionsträgern im Hochofen und Schmelzvergaser
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Knepper, Marco
Babich, Alexander
Senk, Dieter

[Contribution to a conference proceedings]
Kontinuierliche Analyse von flüssigen Eisenströmen mit LIBS
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Feldhoff, Marko
Senk, Dieter

[Contribution to a conference proceedings]
Experimente für die Modellierung der Vakuumstrahlentgasung mit Spülgas
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Christmann, Kevin
Feldhoff, Marko
Özel, Mehmet
Senk, Dieter

[Contribution to a conference proceedings]
Untersuchungen zum Einblasen von vorreduziertem Eisenerz und Char in den Hochofen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Born, Stefan
Babich, Alexander
Senk, Dieter

[Contribution to a conference proceedings]
Untersuchung zur Qualität von gegossenen Stahlblöcken mit verschiedenen Gießparametern
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Chen, Zhiye
Senk, Dieter

[Contribution to a conference proceedings]
Energieeffizienz durch den Einsatz von neuen Wohnkonzepten am Beispiel Containerwohnungen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Abrasheva, Gergana
Senk, Dieter
Häußling, Roger

[Contribution to a conference proceedings]
Einsatz torrefizierter Biomasse im Hochofen
In: Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born]., 2012

Arnsfeld, Sonja
Babich, Alexander
Senk, Dieter

[Contribution to a conference proceedings, Journal Article]
Experimental techniques for the microstructural characterization of retained austenite stability and single phase properties in low-alloyed TRIP-steels
In: Chemické listy, 106 (s3), S515-S518, 2012

Quade, Hendrik
Steffen, Andre
Gavendova, Petra
Prahl, Ulrich
Tolan, Metin
et al.

[Contribution to a conference proceedings]
EcoForge : Ressourceneffiziente Prozessketten für die Herstellung von Hochleistungsbauteilen
In: Tagungsband 13. Roundtable 'Simulation in der Umformtechnik' : simulating manufacturing ; 23. - 26. April 2012, Bamberg / Hrsg.: Michael Wohlmuth ..., 2012

Behrens, Bernd Arno
Bach, Friedrich-Wilhelm
Bleck, Wolfgang
Brinksmeier, E.
Fritsching, U.
et al.

[Contribution to a conference proceedings]
Numerical methods in steel design
In: Werkstofftechnologie und Massivumformung : MEFORM 2012 ; 28. bis 30. März 2012 in Freiberg ; Tagungsband / Acatrain e.V., Verein für Weiterbildung an der TU Bergakademie Freiberg; TU Bergakademie Freiberg, Institut für Metallformung, 2012

Prahl, Ulrich

[Contribution to a conference proceedings]
Phase transformation modelling for different hot rolled dual phase steels
In: Metal forming 2012 : proceedings of the 14th International Conference on Metal Forming; September 16 - 19, 2012, AGH University of Science and Technology, Krakow, Poland / ed. by Jan Kusiak ..., 2012

Suwanpinij, Piyada
Yan, Ding-Shun
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a conference proceedings]
High Al steels for density reduced long products
In: TMP 2012, 4th International Conference on Thermomechanical Processing of Steels, Sheffield, GB, Sep 10-12, 2012, 2012

Dickert, Hans Henning
Stieben, Andreas
Bambach, Margarita
Tsirka, Kyriaki
Fischer, Martin
et al.

[Contribution to a conference proceedings]
Simulation of microstructure development and carbon partitioning in hot rolled dual phase steels by phase field method
In: TMP 2012, 4th International Conference on Thermomechanical Processing of Steels, Sheffield, GB, Sep 10-12, 2012, 2012

Suwanpinij, Piyada
Bleck, Wolfgang
Pinard, Philippe T.
Richter, Silvia

[Journal Article]
Measurements of gas phase reactions at steel surfaces using a mass spectrometer probe
In: Yejin-fenxi : shuangyuekan = Metallurgical analysis, 32 (4), 18-22, 2012

Falk, Heinz
Falk, Martin
Norden, Martin
Huber, Frederic
Bleck, Wolfgang

[Journal Article]
Martensitic transformation behavior of B-bearing steel during isothermal deformation
In: Steel research international, 83 (8), 733-742, 2012
[DOI: 10.1002/srin.201100331]

Salari, Sina
Saeed-Akbari, Alireza
Naderi, Malek
Bleck, Wolfgang

[Journal Article]
Effect of nano-particulate sol–gel coatings on the oxidation resistance of high-strength steel alloys during the press-hardening process
In: Materials and corrosion = Werkstoffe und Korrosion, 63 (10), 940-947, 2012
[DOI: 10.1002/maco.201206729]

Yekehtaz, M.
Klesen, Christian
Benfer, S.
Bleck, Wolfgang
Fürbeth, Wolfram

[Journal Article]
Transformation-induced, geometrically necessary, dislocation-based flow curve modeling of dual-phase steels: Effect of grain size
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 43A (10), 3850-3869, 2012
[DOI: 10.1007/s11661-012-1196-3]

Ramazani, Ali
Mukherjee, Krishnendu
Prahl, Ulrich
Bleck, Wolfgang

[Book]
Integrative computational materials engineering : concepts and applications of a modular simulation platform, 2012

Schmitz, Georg J.
Prahl, Ulrich

[Contribution to a conference proceedings]
Schädigungsmechanische Bewertung der Kaltumformbarkeit von mehrphasigen Stählen
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : [Tagung Werkstoffprüfung 2012, 6. bis 7. Dezember 2012, Bad Neuenahr] / Deutsche Gesellschaft für Materialkunde e.V.Hrsg. von Michael Borsutzki ..., 2012

Münstermann, Sebastian
Lian, Junhe
Vajragupta, Napat

[Contribution to a conference proceedings]
Charakterisierung der Verformungsmechanismen bei hoch Mn-legierten Stählen unter einachsiger Zugbeanspruchung
In: Fortschritte in der Werkstoffprüfung für Forschung und Praxis : [Tagung Werkstoffprüfung 2012, 6. bis 7. Dezember 2012, Bad Neuenahr] / Deutsche Gesellschaft für Materialkunde e.V.Hrsg. von Michael Borsutzki ..., 2012

Labudde, Thorsten
Wildau, Maria
Saeed-Akbari, Alireza
Hoffmann, Sascha
Bleck, Wolfgang

[Contribution to a conference proceedings]
A comparative study of various failure criteria on the formability prediction for DP steel sheets
In: Advanced failure predicition methods in sheet metal forming : 5th Forming Technology Forum 2012 ; June 5th - 6th, 2012, Zurich, Switzerland ; proceedings / IVP, Institut für Virtuelle Produktion, ETH Eidgenössische Technische Hochschule Zürich ..., 2012

Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Proceedings]
Tagungsband zum 27. Aachener Stahlkolloquium Metallurgie : 13. und 14. September 2012, Eurogress Aachen ; ['Metallurgie: Effizienz durch Präzision'] / Institut für Eisenhüttenkunde, Institut für Bildsame Formgebung, RWTH, Rheinisch-Westfälische Technische Hochschule Aachen. [Dieter Senk (Hrsg.). Layout und red. Bearb.: Stefan Born], 2012

Senk, Dieter

[Contribution to a conference proceedings]
Investigation on CTM-alloyed Cr-steel cleanliness and its segregation behaviour
In: Proceedings of the 8th International Conference on Clean Steel : 14-16 May 2012, Budapest, Hungary / Hungarian Mining and Metallurgical Conference, 2012

Zeichner, Miriam
Senk, Dieter
Feicks, Simon

[Contribution to a conference proceedings]
On-line determination of steel cleanliness during ladle metallurgy
In: Proceedings of the 8th International Conference on Clean Steel : 14-16 May 2012, Budapest, Hungary, 2012

Weerts, Hubert
Senk, Dieter
Sattler, L.
Beiler, C.
Janosch, S.

[Contribution to a conference proceedings]
Dynamic De-oxidation and Alloying for Al-Killed Carbon Steel in Billet and Strip Casting
In: Proceedings of the 8th International Conference on Clean Steel : 14-16 May 2012, Budapest, Hungary / Hungarian Mining and Metallurgical Conference, 2012

Senk, Dieter
Grosse, Alexander

[Contribution to a book, Journal Article]
Strategies for fulfilment of critical raw materials demand in Europe
In: Revue de métallurgie, 109 (5), 333-339, 2012
[DOI: 10.1051/metal/2012035]

Senk, Dieter
Meyer, Franz Michael
Pretz, Thomas
Abrasheva, Gergana

[Contribution to a book, Journal Article]
Shipping containers for a sustainable habitat perspective
In: Revue de métallurgie, 109 (5), 381-389, 2012
[DOI: 10.1051/metal/2012025]

Abrasheva, Gergana
Senk, Dieter
Häußling, Roger

[Dissertation / PhD Thesis]
Influences of microstructure, alloying elements and forming parameters on delayed fracture in TRIP, TWIP-aided austenitic steels, 2012

Guo, Xiaofei

[Dissertation / PhD Thesis]
Abgaskonditionierung mit Haftvermittlern zur verbesserten Abscheidung von Feinstäuben beim elektrostatischen Abscheiden, 2012

Schott, Florian

[Contribution to a book, Journal Article]
Meeting technological and social challenges – Sustainable design principles for damage tolerant microstructures
In: Revue de métallurgie, 109 (5), 369-379, 2012
[DOI: 10.1051/metal/2012023]

Münstermann, Sebastian
Bleck, Wolfgang
Schäfer, Dirk
Feldmann, Markus
Aarden, Erik
et al.

[Contribution to a book]
Integrative Process Chain Simulation for Material and Production Technologies
In: Integrative production technology for high-wage countries / Christian Brecher, ed., 2012

Schmitz, Georg J.
Benke, Stefan
Laschet, Gottfried
Apel, Markus
Rosenbaum, Jan
et al.

[Contribution to a book]
Improving the Efficiency of Incremental Sheet Metal Forming
In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 2012

Bleck, Wolfgang
Hirt, Gerhard
Loosen, Peter
Poprawe, Reinhart
Reisgen, Uwe
et al.

[Dissertation / PhD Thesis]
Über die Struktur und das Korrosionsverhalten nanopartikelbasierter keramischer Beschichtungen auf Stahl, 2012

Klesen, Christian

[Contribution to a conference proceedings]
Untersuchungen zum dehnungsbasierten Versagen von geklebten, oberflächenveredelten Blechen im Zugscherversuch
In: 2. Doktorandenseminar Klebtechnik : Vorträge der gleichnamigen Tagung in Dresden am 5. und 6. September 2011, 2012

Scheik, Sven
Reisgen, Uwe
Schleser, Markus
Huber, Frederic

[Abstract, Contribution to a conference proceedings]
Scientific Cooperation Engineering in the Cluster of Excellence Integrative Production Technology for High-Wage Countries at RWTH Aachen University
In: ICERI2012 : Fifth International Conference of Education, Research and Innovation ; Madrid, Spain, 19-21 November 2012 ; conference proceedings / Edited by L. Gómez Chova, A. López Martínez, I. Candel Torres. International Association of Technology, Education and Development, IATED, 2012

Jooß, Claudia
Welter, Florian
Leisten, Ingo
Richert, Anja
Schaar, Anne Kathrin
et al.

[Journal Article]
Prüfung der mechanischen Eigenschaften von „Quenching und Partitioning“-Gefügen mit berührungsloser Dehnungsmessung
In: Materialwissenschaft und Werkstofftechnik = Materials science and engineering technology, 43 (11), 950-956, 2012
[DOI: 10.1002/mawe.201200935]

Nikolei, Nadine
Rieger, Thomas
Bleck, Wolfgang
Schenuit, E.

[Contribution to a conference proceedings]
Experimental und numerical investigations of ductile failure behavior in the ferritic steel
In: Fracture Mechanics for Durability, Reliability and Safety : 19th European Conference on Fracture (ECF19) ; Kazan, Russia, 26-31 August, 2012 / ESIS, European Structural Integrity Society, 2012

Kucharczyk, Pawel
Münstermann, Sebastian

[Journal Article]
New bainitic steels for forgings
In: Archives of Civil and Mechanical Engineering, 12 (2), 119-125, 2012
[DOI: 10.1016/j.acme.2012.04.012]

Keul, Christoph Alexander
Wirths, Vera
Bleck, Wolfgang

[Journal Article]
Fast algorithms for phase transformations in dual phase steels on a hot strip mill run-out table (ROT)
In: Archives of Civil and Mechanical Engineering, 12 (3), 305-311, 2012
[DOI: 10.1016/j.acme.2012.06.004]

Suwanpinij, Piyada
Prahl, Ulrich
Bleck, Wolfgang
Kawalla, Rudolf

[Contribution to a conference proceedings, Journal Article]
Failure analysis of DP600 steel during the cross-die test
In: Computational materials science, 64, 101-105, 2012
[DOI: 10.1016/j.commatsci.2012.01.031]

Ramazani, Ali
Abbasi, Mahmoud
Prahl, Ulrich
Bleck, Wolfgang

[Contribution to a book]
Test Case Gearing Component
In: Integrative computational materials engineering : concepts and applications of a modular simulation platform / ed. by Georg J. Schmitz and Ulrich Prahl, 2012
[DOI: 10.1002/9783527646098.ch9]

Konovalov, Sergey
Henke, Thomas
Jansen, Ulrich
Hardjosuwito, Ario Frederik
Lohse, Wolfram
et al.

[Journal Article]
Exploiting the property profile of high strength steels by damage mechanics approaches
In: Materials testing, 54 (9), 557-563, 2012

Münstermann, Sebastian
Sharaf, Mohamed
Lian, Junhe
Golisch, Georg

[Journal Article]
Estimation of the endurance fatigue limit for structural steel in load increasing tests at low temperature
In: Fatigue & fracture of engineering materials & structures, 35 (7), 628-637, 2012
[DOI: 10.1111/j.1460-2695.2011.01656.x]

Kucharczyk, Pawel
Rizos, Alexandros
Münstermann, Sebastian
Bleck, Wolfgang

[Dissertation / PhD Thesis]
Bildung von Ablagerungen durch Biodiesel in einem Führungsspiel und deren versuchstechnische Bewertung, 2012

Ellenschläger, Andreas

[Journal Article]
Effects of Charcoal Carbon Crystallinity and Ash Content on Carbon Dissolution in Molten Iron and Carburization Reaction in Iron-Charcoal Composite
In: ISIJ international, 52 (8), 1482-1488, 2012
[DOI: 10.2355/isijinternational.52.1482]

Ohno, Ko-ichiro
Babich, Alexander
Mitsue, Junki
Maeda, Takayuki
Senk, Dieter
et al.

[Journal Article]
Entwicklung eines Al-reduzierten Einsatzstahls für die Hochtemperatur-Aufkohlung
In: HTM - journal of heat treatment and materials, 67 (3), 202-209, 2012

Konovalov, Sergey
Prahl, Ulrich
Kohlmann, R.
Bleck, Wolfgang

[Book]
Spezielle Werkstoffkunde der Stähle für Studium und Praxis, 2012

Bleck, Wolfgang

[Contribution to a conference proceedings]
Gefügeeinfluss auf das zyklische Wachstum kurzer Risse in Baustählen
In: Bruchmechanische Werkstoff- und Bauteilbewertung : Beanspruchungsanalyse, Prüfmethoden und Anwendungen ; 44. Tagung des DVM-Arbeitskreises Bruchvorgänge, 14. + 15. Februar 2012, Darmstadt / Deutscher Verband für Materialforschung und -prüfung e.V. Obmann des Arbeitskreises: Dietmar Klingbeil, 2012

Sharaf, Mohamed
Münstermann, Sebastian
Brinckmann, S.
Hartmaier, A.

[Journal Article]
Design of damage tolerance in high-strength steels. Dedicated to Prof. Dr.-Ing. Christina Berger on the occasion of her 65th birthday
In: International journal of materials research : IJMR, 103 (6), 755-764, 2012
[DOI: 10.3139/146.110697]

Münstermann, Sebastian
Lian, Junhe
Bleck, Wolfgang

[Contribution to a book, Contribution to a conference proceedings, Journal Article]
EcoForge: Resource-efficient process chains for high performance parts
In: Key engineering materials, 504/506, 151-156, 2012
[DOI: 10.4028/www.scientific.net/KEM.504-506.151]

Behrens, Bernd Arno
Bleck, Wolfgang
Bach, F. W.
Brinksmeier, E.
Fritsching, U.
et al.

[Contribution to a conference proceedings]
Modeling of different zones of as-cast structure of high carbon steel ingots
In: MCWASP XIII : International Conference on Modeling of Casting, Welding and Advanced Solidification Processes ; 17–22 June 2012, Schladming, Austria, 2012
[DOI: 10.1088/1757-899X/33/1/012081]

Chen, Zhiye
Arnsfeld, Sonja
Senk, Dieter

[Journal Article]
Low stacking fault energy steels in the context of manganese-rich iron-based alloys
In: Scripta materialia, 66 (12), 1024-1029, 2012
[DOI: 10.1016/j.scriptamat.2011.12.041]

Saeed-Akbari, A.
Schwedt, Alexander
Bleck, Wolfgang

[Journal Article]
New attempt to wrinkling behavior analysis of tailor welded blanks during the deep drawing process
In: Materials and design, 40, 407-414, 2012
[DOI: 10.1016/j.matdes.2012.04.015]

Abbasi, M.
Ketabchi, M.
Labudde, Thorsten
Prahl, Ulrich
Bleck, Wolfgang

[Journal Article]
Phase-field modeling of microelastically controlled eutectic lamellar growth in a Ti-Fe system
In: Journal of crystal growth, 349 (1), 36-42, 2012
[DOI: 10.1016/j.jcrysgro.2012.03.056]

Ebrahimi, Z.
Rezende, J. L.
Kundin, J.

[Contribution to a conference proceedings]
3d metallography of multiphase steels
In: Characterization of minerals, metals and materials : proceedings of a symposium ... held during the TMS 2012 Anual Meeting & Exhibition, Orlando, Florida, USA, March 11 - 15, 2012 / Minerals, Metals and Materials Society. Ed. by Jiann-Yang Hwang, 2012

Fischer, Martin
Lutomski, Pierre
Stieben, Andreas
Bleck, Wolfgang

[Contribution to a conference proceedings]
Effect of different casting parameters on the cleanliness of high manganese steel ingots compared to high carbon steel
In: TMS 2012 141st annual meeting & exhibition : supplemental proceedings ; held March 11 - March 15 in Orlando, Calif. / Minerals, Metals and Materials Society. - Vol. 2: Materials fabrication, properties, characterization, and modeling, 2012

von Schweinichen, Petrico
Chen, Zhiye
Senk, Dieter
Lob, Alexander

[Dissertation / PhD Thesis]
Chromverschlackung bei der Erzeugung von chromhaltigen Schmelzen im Elektrolichtbogenofen und die Möglichkeiten zu deren Verringerung, 2012

Mees, Helge

[Journal Article]
Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: part i. mechanism maps and work-hardening behavior
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 43A (5), 1688-1704, 2012
[DOI: 10.1007/s11661-011-0993-4]

Saeed-Akbari, A.
Mosecker, Linda
Schwedt, Alexander
Bleck, Wolfgang

[Journal Article]
Characterization and prediction of flow behavior in high-manganese twinning induced plasticity steels: part ii. jerky flow and instantaneous strain rate
In: Metallurgical and materials transactions / A, Physical metallurgy and materials science, 43A (5), 1705-1723, 2012
[DOI: 10.1007/s11661-011-1070-8]

Saeed-Akbari, Alireza
Mishra, A. K.
Mayer, Joachim
Bleck, Wolfgang

[Journal Article]
Contrary effects of microstructure and cleanliness on tensile and toughness properties in precipitation hardening stainless steels
In: Steel research international, 83 (5), 434-444, 2012
[DOI: 10.1002/srin.201100237]

Nick, Eva-Maria
Müller, Merle G. J.
Voigt, Sally G.
Park, Daesung
Reinholdt, Alexander
et al.

[Journal Article]
Investigation into the effects of weld zone and geometric discontinuity on the formability reduction of tailor welded blanks
In: Computational materials science, 59, 158-164, 2012
[DOI: 10.1016/j.commatsci.2012.02.039]

Abbasi, Mahmoud
Ketabchi, Mostafa
Ramazani, Ali
Abbasi, Mohammad
Prahl, Ulrich

[Journal Article]
The effect of strain rate and deformation temperature on the characteristics of isothermally hot compressed boron-alloyed steel
In: Materials science & engineering / A, Structural materials: properties, microstructure and processing, 538, 356-363, 2012
[DOI: 10.1016/j.msea.2012.01.060]

Abbasi, M.
Saeed-Akbari, Alireza
Naderi, M.

[Journal Article]
Flow curve and failure modeling for high-mn steels on a microstructural scale
In: Steel research international, 83 (4), 340-345, 2012
[DOI: 10.1002/srin.201100321]

Twardowski, Raphael
Steinmetz, David Richard
Prahl, Ulrich

[Journal Article]
In situ characterization of deformation behavior of austenitic high manganese steels
In: Steel research international, 83 (4), 379-384, 2012
[DOI: 10.1002/srin.201100311]

Hoffmann, Sascha
Bleck, Wolfgang
Berme, Banu

[Journal Article]
Lab experiments on the innovative rapid thick strip casting process
In: International journal of minerals metallurgy and materials, 19 (5), 391-398, 2012
[DOI: 10.1007/s12613-012-0569-3]

Nagy, Richard Csongor
Senk, Dieter

[Dissertation / PhD Thesis]
Metallurgische Behandlung von Stahlschmelzen und deren Erstarrung im System Fe-Mn-C, 2012

Lob, Alexander

[Journal Article]
Application of response surface methodology to drive gtn model parameters and determine the fld of tailor welded blank
In: Computational materials science, 53 (1), 368-376, 2012
[DOI: 10.1016/j.commatsci.2011.08.020]

Abbasi, Mahmoud
Bagheri, B.
Ketabchi, M.
Haghshenas, D. F.

[Contribution to a book]
Visualization
In: Integrative computational materials engineering : concepts and applications of a modular simulation platform / ed. by Georg J. Schmitz and Ulrich Prahl, 2012

Beer, Thomas
Meisen, Tobias
Prahl, Ulrich

[Contribution to a book]
Distributed Simulations
In: Integrative computational materials engineering : concepts and applications of a modular simulation platform / ed. by Georg J. Schmitz and Ulrich Prahl, 2012

Beer, Thomas
Meisen, Tobias
Reinhard, Rudolf
Prahl, Ulrich

[Contribution to a conference proceedings, Journal Article]
On the influence of steel microstructure on short crack growth under cyclic loading
In: International journal of fatigue, 41 (August), 83-89, 2012
[DOI: 10.1016/j.ijfatigue.2011.12.005]

Kucharczyk, Pawel
Sharaf, Mohamed
Münstermann, Sebastian

[Contribution to a book, Journal Article]
Numerical Determination of the Damage Parameters of a Dual-phase Sheet Steel
In: ISIJ international, 52 (4), 743-752, 2012
[DOI: 10.2355/isijinternational.52.743]

West, Ole
Lian, Junhe
Münstermann, Sebastian
Bleck, Wolfgang

[Contribution to a conference proceedings]
Qualification of electron beam welding in the thick-plate range for applications in wind energy plant construction
In: International Electron Beam Welding Conference : lectures of the 2nd IEBW Conference taking place in Aachen on March 26 - 30, 2012 / organized by American Welding Society (AWS), Miami ... Wilfried Behr, technical chairman ..., 2012

Reisgen, Uwe
Olschok, Simon
Ufer, Sebastian
Bleck, Wolfgang
Münstermann, Sebastian
et al.

[Contribution to a conference proceedings, Journal Article]
Monitoring of Heat Treatment Processes by High Energy Synchrotron Radiation
In: Acta physica Polonica / A, 121 (1), 39-43, 2012
[DOI: 10.12693/APhysPolA.121.39]

Klemradt, Uwe
Rieger, Thomas
Herrmann, Klaus
Carmele, Dagmar
Meyer, Stephan
et al.